DELIVERY: HTH pH Minus Micro-Balls 5kg will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: HTH pH Minus Micro-Balls 5kg can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

HTH pH Minus Micro-Balls 5kg comes in a 5kg container. Depending on the how it is used to dose your swimming pool or hot tub, HTH pH Minus Micro-Balls 5kg will lower either the pH or the Total Alkalinity in the water. High pH will cause cloudy water and can be a factor in scale formation. High pH may also reduce the sanitisation effectiveness of chlorine. Swimming Pool & Hot Tub water with a high alkalinity reading will be difficult to lower the pH as any chemicals designed to lower pH will automatically will be used up by the buffering action of the alkalinity.

Instructions To Correct High pH Levels in Swimming Pools or Hot Tubs using HTH pH Minus Micro-Balls 5kg

Test your pool water using your prefered testing method. If higher than 7.6 you will need to lower it

With the pumps and filtration running, sprinkle the amount suggested on the label of HTH pH Minus Micro-Balls 5kg evenly around the pool, avoiding the skimmer areas. Do not dose more than 500g at any one time. If more than 500g is required repeat the process after 24 hours.

Leave the filtration running and re-check the pH levels after 24 hours. If required redose with HTH pH Minus Micro-Balls 5kg

Instructions To Correct High Alkalinity Levels in Swimming Pools or Hot Tubs using HTH pH Minus Micro-Balls 5kg

Calculate your pool water volume, if in doubt call us and we can advise you.

Test your pool water using your preferred testing method. If the Total Alkalinity reading is higher than 150 mg/l (ppm) you will need to lower it.

With the Pump & Filtration OFF pour 1kg, in 200g increments, into one area at the deepest end of the pool, away from the skimmers. Each 1 kg dose should reduce the Alkalinity levels by 10-20 mg/l  (ppm)

After 24 hours re-test the swimming pool or hot tub and if the Total Alkalinity reading is still above 150 ppm then repeat the dose until the level is correct.

DELIVERY: Relax Energize Sachet will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Relax 30g Energize sachel can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Relax Energize Sachets in a small one dose 30g sachet. The Energize sachet will help provide water clarity without shock-chlorinantion.

The Relax Energize Sachet is an Oxygen based shock treatment that helps eliminate water contaminants

DELIVERY: HTH pH Plus Powder 5kg is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: HTH pH Plus Powder 5kg can be returned unused & in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

HTH pH Plus Powder 5kg is used for raising the pH levels in your swimming pool or hot tub spa. Maintaining the correct pH levels in the water is important as low pH levels can cause eye and skin irritation and cause corrosion and damage pumps, heaters and even the pool finish.

pH levels show whether the water is Acidic or Alkali. Low is Acidic and High is Alkali

Instructions To Correct Low pH Levels in Swimming Pools using HTH pH Plus Powder 5kg

Test your pool water using your preferred testing method. If lower than 7.2 you will need to raise it

Dissolve the amount suggested on the label of HTH pH Plus Powder 5kg in a 10 litre bucket. Do not dissolve more than 500g at any one time. If more than 500g is required repeat the process.

With the pumps running pour the mixture evenly around the pool, but not into the skimmers.

Leave the filtration running and re-check the pH levels after 24 hours. If required redose with HTH pH Plus Powder 5kg

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

DELIVERY: Ahh Some Spa Cleaner will normally take between 1-3 days, but please allow 5 working days in some extreme cases. 

RETURNS: Ahh Some Spa Cleaner can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Ahh Some Spa Cleaner Bio Film Remover is an environmentally friendly Bio Film Remover for Spas. Ahh Some removes the build-up of oils, bacteria, lotions, cosmetics, skin and other organic contaminants, within the plumbing, jets, and on the shell of your Spa.

Ahh-Some Video Demonstration 'How to Use'

Treatments per pack:

57gm: 3 treatments
170gm: 9 treatments
453gm: 24 treatments

DELIVERY: Relax Energize Sachet will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Relax 30g Energize sachel can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

15 X Relax 30g Energize Sachets will help revitalise Spa water. Energize sachets can be used on a weekly basis as a Oxyegen based non chlorine shock treatment. This will not add excessive chlorine or bromine into your hot hot tub. We offer these in units of 5 and 10 Relax Energize Sachets

Energize sachets come in 30g sachets for a handy single dose for a Spa or small swimming pool.The Energize sachets contain a water clarifier that allows small contaminants to be removed and rapid acting oxidiser to revitalise water

DELIVERY: Fi-Clor Non Chlorine Shock will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Fi-Clor Non Chlorine Shock can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

.

PRODUCT INFO:

Fi-Clor Spa Non-Chlorine Shock is the ideal water treatment to shock Spas. Fi-Clor Non-Chlorine Shock works on Spas using both Bromine or Chlorine. No pre-dissolving, this product rapidly dissolves to break down pollutants in the water.

Fi-Clor Spa Non-Chlorine Shock should be used if you Spa is green or cloudy but it is also advisable to use this non-chlorine shock treatment on a fortnightly basis The dose rate is 15g for every 1,000 litres of water added directly into the spa water whilst bathers are out of the water.

Please refer to the instructions on the container for full information on how to properly use Fi-Clor Non-Chlorine Shock

Fast next working day delivery

DELIVERY: Fi-Clor Bromine Granules are sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Fi-Clor Brominating Granules can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

.

PRODUCT INFO: 

Fi-Clor Spa Bromine Granules can be used in conjunction with bromine tablets to boost the bromine levels or as the sole sanatiser. The granules are fast dissolving so can be added straight into the spa water. Fi-Clor Bromine Granules contain 1-bromo 3-chloro 5.5 Demethyl Hydantoin that will produce Hypobromous Acid which will sanitise the hot tub or pool. When testing for it use a tester that will show Total Bromine

Fi-Clor Bromine Granules Guide

Test your Spa water for Total Bromine, if lower than 2ppm you will need to increase it. The desired levels should be between 4-5ppm

Add Fi-Clor Bromine Granules at a rate of 3g per 1,000 litres to increase the Bromine level by 1ppm. Check the Total Bromine levels regularly especially after using the hot tub / spa. Fi-Clor Non Chlorine Shock or Fi-Clor Spa Oxy-Brite Sachets should be used as a regular shock treatment

We hold Fi-Clor Bromine Granules in stock for fast next working day delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Fi-Clor Alkalinity Increaser. Swimming Pool water needs to be maintained at a Total Alkalinity of between 80 - 140ppm,this figure can easily tested using Aquachek Test Strips.

Keeping your Swimming Pool Total Alkalinity within these limits will prevent damage to your swimming equipment and ensure that the Chlorine in your swimming pool is working effectively, whilst working as a buffer for the pH level

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Poppers (Blue Press Fix) for solar cover strap sets

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Pool Pump Inverter will help you to control your pool pump's speed, reducing rpm when required. This inverter is easy to install and simply connects to your wall mounted pool pump. Its manual control allows you to vary the speed of your pump when you do not need full power and revert to full speed when you need to i.e. when you are backwashing or require higher flow. The inverter should be used with a good quality pump such as a Certikin brand, Sta Rite, Waterco etc.

 A 30%  reduction from 2850rpm to 1995 rpm can result in energy saving of 70%. The money you save through using less energy far out-ways the initial cost of this inverter, meaning that this product is an essential item for pool owners who wish to save money.

Certikin Inverter is designed to be used on pumps 1hp to 2hp

Benefits of using a pump inverter:  

- Energy savings (70%-80%)
- Reduces noise

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The clever pool pump inverter is a highly efficient and advance variable speed pump controller saving you energy consumptions up to 80% in some cases. Compatible with 95% of single speed pumps up to 1.5HP and with its really easy installation the pump inverter is really catching on across the pool market. Very User friendly with a four pre-programmed speed and time setting for all swimming pool application

Clever Pool Pump Inverter for swimming pool pumps - With energy prices continually on the rise clever pool pump inverter have designed one of the most advanced, efficient and user friendly variable speed controllers that can be used with single speed pool pumps (up to 1.1kW/1.5HP). Pool owners can expect to save up to £743.00 per year by installing this compact, plug in device.

By using advanced motor control technology, clever pool pump inverter allows the user to set reduced speeds on their pump, which can mean a significant reduction in energy consumption.

The Clever Pool pump Inverter can be set to over 30 different speeds to suit a variety of tasks,  unlike any other product of its kind, it has an advanced, user friendly control panel, which allows the user to set up to four time periods in 24 hours, all with different energy saving levels. By plugging the single speed pool pump into pump inverter, the single speed pump becomes a highly efficient and flexible variable speed pump that can be customised to suit the user’s needs.

Clever Pool Pump Inverter therefore provides one of the highest returns on investment in the industry today. This includes low flow for long and steady filtration, slightly higher flow to run certain types of cleaning and heating products and high flow to do filter back washing.

How does it work?

The Clever Pool Pump Inverter works by allowing your single speed pool pump run at lower flow rates, increasing efficiency and reducing energy consumption by up to 80%.

Single speed pool pumps tend to run at higher capacities than required and therefore are inefficient and expensive.

Clever Pool Pump Inverter has an in built timer that allows you to set up to 4 time periods for your pool pump to run throughout a 24 hour period. It also allows you to choose from 30 different speeds giving you more control than any other product of this kind.

Instock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Hydropro P12 Swimming Pool Heat Pumps are ideal for smaller swimming pools up to 50m3 during the main summer months, slightly less if starting in April or the beginning of May.

The Hydropro P12 comes complete with a 6m Plug and Play Cable that needs to be connected by competent person providing a brilliant plug and play heat pump for both inground and above ground swimming pools

The ideal size pool for this hydropro P12 swimming pool heat pump is a 12ft x 24ft swimming pool

To see other sizes of hydropro heat pumps click here. Full Range Of Hydropro Heat Pumps

For help and advice call 01322 554 870

 If you would like to ask us to price match a competitor, please click the Price Match image to send us the request.

DELIVERY: Relax 1kg No Foam will normally take between 1-3 days, but please allow 5 working days in some extreme cases. 

RETURNS: Spa No Foam can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

.

PRODUCT INFO:

Relax Spa No Foam is used for the removal of foam build up in your hot tub spa. Foaming is normally a sign of a build up of residue of shampoo, body lotions, hair products and detergents. To eradicate foaming totally bathers are advised to shower before using the spa.

Relax spa anti Foam should be used only when required.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

1kg Relax Spa Total Alkalinity Plus is used to increase the Alkalinity of your spa water. Spa water tends to lose Total Alkalinity (TA) within days of you filling your spa with fresh water and low TA will result in damage to your spa equipment, pH fluctuation and bather discomfort.

The Ideal levels are between 100 parts per million (ppm) and 140 ppm

• Test the Alkalinity of your spa water at least twice per week, more often if you are located in a soft water area

DELIVERY: Relax 7kg pH minus will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Relax 7kg pH minus can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Relax 7kg pH Minus swimming pools is used to reduce the pH when the levels are too high. 

Relax pH 7kg Minus will correct high levels of pH (above 7.6) or alkalinity (above 160mg/l). High pH or alkalinity will lead to problems with cloudy water and scaling of surfaces and pipework. High pH will make chlorine sanitisers less effective and high alkalinity can make it difficult to adjust the pH

DELIVERY: Relax Spa Bromine granules will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: relax products can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

1kg Relax Bromine Granules are a popular method to sanitize your hot tub / spa. Relax bromine granules must be pre dissolved prior to being added to your spa water can be dosed straight into the spa water. 

Instructions To Correct Low Total Bromine Levels in Swimming Pools using Relax Bromine Granules

Calculate your pool water volume, if in doubt call us and we can advise you.

Test your pool water for Total Bromine, if lower than 2ppm you will need to increase it. The desired levels should be between 2-5ppm

Add Relax Bromine Granules at a rate of 3g per 1,000 litres to increase the Bromine level by 1ppm. Ideally, aim to keep the Spa Bromine levels around 4ppm or 5ppm.

Check the Total Bromine levels regularly and aim for a reading of 4-5ppm to ensure the water is clean and safe.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:


Epoxy Repair Stick is a two-part epoxy putty. To use, simply break off what you need, knead then apply. Epoxy Repair Stick forms into a white concrete like material and is easy to apply. The mix will be white and will harden within 20-30 minutes. In 24 hours, it will be rock hard and will seal the hole/damaged area. The Epoxy Repair Stick is environmentally and ecologically friendly and has a four-year shelf life. Epoxy Repair Stick will glue swimming pool tiles underwater, it can be used to repair concrete pool surface cracks and particularly handy with fibre-glass repairs and ABS 
 

Fast Delivery on this product

DELIVERY: Fi Clor ph Increaser is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Fi Clor pH Increaser can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Fi-Clor pH Increaser (soda ash) is an essential pool and hot tub chemical product that helps balance the pH in the water when your pH levels are too low.

Fi-Clor Spa pH Increaser corrects the pH when it falls below 7.2. Acidic spa water is uncomfortable to bathe in and if left unchanged, can cause corrosion of metal parts and fittings.pH Increaser (pH plus) works to increase your pool waters pH balance using soda ash.

Take a pH reading using test strips or test tablets. Increase the pH if the reading is below 7.2. The dose rate is 10g Fi-Clor Spa pH Increaser per 1,000 litres (220 galls) of spa water. Each dose increases the pH by approx 0.2.

With the circulation system running, dose directly in several areas around the spa, avoiding the skimmer. Dose only when bathing has ceased. Continue filtration & re-test after 15 minutes. Repeat treatment until the pH falls within the range 7.2-7.6.

Contains Sodium Carbonate.

DELIVERY: Ahh-Some Spa Cleaner is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Ahh-Some Spa Cleaner can be returned if unopened and in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Ahh Some Spa Cleaner (Bio Film Remover) 453g

Ahh Some Spa Cleaner is an environmentally friendly Bio Film Remover for hot tub spas. It is a formula that when applied to hot tub water, removes the build-up of biofilm (oils, bacteria, lotions, cosmetics, skin and other organic contaminants) within the pool water as well as the plumbing, jets, and shell of your Hot Tub or Spa. 

What is Bio Film? 

 Biofilm is a complex structure which adheres to surfaces that are in regular contact with water. Biofilm consist of colonies of bacteria and other micro organisms (such as yeasts, fungi and protozoa) that secrete a mucilaginous protective coating (EPS matrix) in which they are encased. They can form on solid or liquid surfaces and are typically resistant to conventional methods of disinfection.

Why do Hot Tub Spas Get Bio Film?

 Hot tubs and spas are more difficult to maintain due to the heat of the water. Bio-Film thrives on bacteria comprising of dead skin and other components and due to the warmer temperature of water, bio-film multiplies by the day. A product such as the Ahh-Some Spa cleaner is a must for any hot tub or spa owner.

How does Ahh-Some work?

Ahh-Some works at dislodging the Biofilm EPS matrix. Our formulation include components that soften the outer walls, allowing scrubbers and carrier salts to loosen and break-up these hard to get rid of bacteria. It effectively does this by stripping the layers off the Biofilm when it is adhered to a surface. You must remember that Ahh-Some is not an enzymatic cleaner so when using the product in sanitised systems, add a shock dose of the sanitiser prior to starting treatment. This ensures that as Ahh Some dislodges cells back into a planktonic condition, the sanitiser can attack and control as it was designed.

Why Ahh-Some?

Ahh Some reduces your sanitiser usage, improves your water clarity, reduces unpleasant odours and generally enhances your bathing experience.

Treatments per pack:

57gm: 3 treatments
170gm: 9 treatments
453gm: 24 treatments

DELIVERY: Ahh-Some Spa Cleaner is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Ahh-Some Spa Cleaner can be returned if unopened and in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Ahh Some Spa Cleaner (Bio Film Remover) 170g

Ahh Some Spa Cleaner is an environmentally friendly Bio Film Remover for hot tub spas. It is a formula that when applied to hot tub water, removes the build-up of biofilm (oils, bacteria, lotions, cosmetics, skin and other organic contaminants) within the pool water as well as the plumbing, jets, and shell of your Hot Tub or Spa. 

What is Bio Film? 

 Biofilm is a complex structure which adheres to surfaces that are in regular contact with water. Biofilm consist of colonies of bacteria and other micro organisms (such as yeasts, fungi and protozoa) that secrete a mucilaginous protective coating (EPS matrix) in which they are encased. They can form on solid or liquid surfaces and are typically resistant to conventional methods of disinfection.

 Why do Hot Tub Spas Get Bio Film?

 Hot tubs and spas are more difficult to maintain due to the heat of the water. Bio-Film thrives on bacteria comprising of dead skin and other components and due to the warmer temperature of water, bio-film multiplies by the day. A product such as the Ahh-Some Spa cleaner is a must for any hot tub or spa owner.

 How does Ahh-Some work?

Ahh-Some works at dislodging the Biofilm EPS matrix. Our formulation include components that soften the outer walls, allowing scrubbers and carrier salts to loosen and break-up these hard to get rid of bacteria. It effectively does this by stripping the layers off the Biofilm when it is adhered to a surface. You must remember that Ahh-Some is not an enzymatic cleaner so when using the product in sanitised systems, add a shock dose of the sanitiser prior to starting treatment. This ensures that as Ahh Some dislodges cells back into a planktonic condition, the sanitiser can attack and control as it was designed.

Why Ahh-Some?

Ahh Some reduces your sanitiser usage, improves your water clarity, reduces unpleasant odours and generally enhances your bathing experience.

Treatments per pack:

57gm: 3 treatments
170gm: 9 treatments
453gm: 24 treatments