DELIVERY: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

PRODUCT INFO:

The Poolstyle Mini Plug & Play Heat Pumps come in two sizes for the larger Intex & Bestway above ground pools. The 6kw Poolstyle Mini Heat Pump is perfect for pools up to 25m3, such as an Intex 15ft x 48" Metal Frame Pool, whilst the 8kw Poolstyle Mini Heat Pump is ideal for pools up to 35m3, such as a 18ft x 48" Metal Frame Pool. Only suitable for pool heating during the main Summer months. A Solar Cover must be used too. Buy Now For Same Day Despatch.

Poolstyle Mini Plug & Play Heat Pumps For Above Ground Pools are designed purely for the larger above ground pool market. Intex, Bestway & Summer Escapes pools are perfect for this heat pump

The minimum Flow rate from your pool pump is 2m3/hr to start the Poolstyle Mini Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

Digital Heating Control Panel - Control Heating Up To 40°C

No ByPass Required if using small Intex pumps

The Poolstyle Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible at night.

The Poolstyle Mini 6kw Above Ground Pool Heat Pump is for pools up to 25m3

The Poolstyle Mini 8kw Above Ground Pool Heat Pump is for pools up to 35m3

Below are suggestions for above ground pool sizes that the Poolstyle Mini Heat Pumps are suitable for

Metal Frame Pools

Easy Set Pools

Rectangular & Oval Framed Pools

DELIVERY: Flotide A10 Plug & Play Above Ground Pool Heat Pumps are sent out on a 2 working day service

RETURNS: Flotide A10 9.6kw Plug & Play Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

PRODUCT INFO:

Flotide A10 Plug & Play 9.6kw Above Ground Pool Heat Pumps are designed for larger Intex & Bestway pools, up to 30,000 litres. This would equate to a 20ft x 12ft Bestway pool.

Flotide A10 Plug & Play Heat Pumps have an exceptionally high COP of 6, meaning you can get up to 6 times more heat into your pool than it will cost you in electricity.

Flotide A10 Plug & Play Heat Pumps will function down to an air temperature of 5°C, but as with any heat pump, the warmer the air the more efficient they are and the more heat transferred into your pool. The warmer the air the better!!

CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

When purchasing a heat pump large enough for your pool you would usually have to take into account the cost to be hard wired into mains by and electrician on its own spurs and RCD. The Flotide A10 Plug & Play Above Ground Pool Heat Pump is reasonably priced, user friendly and runs from a standard UK 13amp 3-pin plug. Everything you could want from a heat pump unit for an above ground swimming pool. 

Below is a guide that is is based on summer use with a good solar cover being used. 

Flotide A10 Plug & Play Above Ground Pool Heat Pump pools - Pools up to 30m3

Minimum Flow rate required 5.5m3/hr 

Supplied with 50mm sockets to connect to a bypass kit or hosetails. These can be purchased separately

We can also assist with the correct fittings you may need to install this heater. Fittings will depend on the make and model of your pool and how far away from the pool you want the heat pump situated. Please call us on 01322554870 for help and advise on heat pump installations

CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

DELIVERY: Hydropro P14 Swimming Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Hydropro P14 Heat Pump is the latest Swimming Pool Heat Pump available with R32 Gas. The hydropro heat pumps are ideal for swimming pools up to 50m3 during the main summer months, slightly less if starting in April or the beginning of May.

As the Hydropro P14 Heat Pump will function down to -5° Celcius they can be used all year round. To function correctly it will need to be sized correctly. As a rough guide double the Ideal Size, but it is best if you call us on 01322 554 870

Hydropro P14 Heat Pump

Ideal Size Pool 28ft x 14ft x 4ft Deep

Maximum Pool Size 28 ft x 14ft x 5ft Deep

To see other sizes of hydropro heat pumps click here. Full Range Of Heat Pumps

For help and advice call 01322 554 870

DELIVERY: Hydropro Inverter Swimming Pool Heat Pumps are delivered by a specialist haulier and take 1-3 days to arrive. 

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Hydro-Pro Inverter Heat Pumps offer massive savings during the Sumer months when compared to other heat pumps. With C.O.P.s of up to 13 the Hydropro Inverter Heat Pumps are not only quiet but are one of the most advanced in technology. Using R32 Gas they are not only better for the environment than older style heat pumps but dramatically more effective too.

If you are looking to buy a heat pump for the future as well as for now the Hydropro Z Inverter range is suited to you.

With each £1 of power input you can have an output of up to £13 when in Silent Mode.

Having three settings the Hydropro Inverter Heat Pump can offer Super Quiet running whilst in the Silent Mode, ideal if running overnight or during the main Summer months. The Smart Mode uses al three modes to maintain your pool at a set temperature and the Powerful Mode is ideal when opening your pool or after inclement weather.

Hydro-Pro Inverter Type heat pumps are very quiet running as the use a variable speed motor along with a low noise DC Inverter rotary compressor and fan.

Anti-Vibration Rubber Pads which fit under the four feet on the unit will help even further to reduce noise.

All Hydropro PX Type Inverter Heat Pumps are fitted with an automatic defrost and the ability to work down to -5 C, giving you 12 month, all year round heating of your indoor pool. With three settings, 'Power', 'Smart' & 'Silent' allowing you to adjust the output to suit weather conditions, saving you up to 30% in running costs, you will find the Hydropro PX Inverter Heat Pumps will suit your needs perfectly.

If you are planning to use your Hydropro PX Type Inverter Heat Pump for Summer or Extended Season only, then using the guide above will help. But if you want to size your Hydro-Pro Inverter heat pump correctly for All Year Round use, please call us on 01322 554 870 as there are a number of factors we need to be taken into account before we can correctly advise which model you will need. These will include pool size, hours used per day, preferred water temperature and whether the pool is insulated.

Sizing an all year round swimming pool heat pump uses different parameters than a standard model, so calling us on 01322 554 870 before ordering is essential.