Above Ground Pool Pumps

Above Ground Swimming Pool Pumps for upgrading from smaller pumps or to replace an old pump on an above ground pool. These pumps have a smaller footprint than other pumps. Stock includes brands such as Certikin, Mega, Plastica and Pentair 
doughboy swimming pool pump

Doughboy Swimming Pool Pump

by World Of Pools.com
£175.00
  • Self Priming Whisper Quiet Pump
  • Ideal for both Inground and above ground pools
  • Drop in replacement for Doughboy Pool
  • Extra large strainer basket
  • Easy access transparent lid 
  • 1.5”suction, 1.5” delivery
  • 2 years warranty

 

DELIVERY: Doughboy Pool Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Doughboy Pool Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Doughboy Swimming Pool Pump

Doughboy Swimming Pool Pump are a self-priming pool pump equipped with large strainer basket & transparent lid that allows easy inspection of the filter basket.

Whisper quiet pool pump and a vey low price. This pump is ideal for in-ground and above ground swimming pools. Drop in replacement for doughboy pools.

High flow rate on both pump sizes, 15m3 p/h on the .75hp and 18m3 p/h on the 1hp. Pump drain plug for easy of winterising / maintenance.

Solid reliable pump that comes with 2 years warranty

 

Certikin Mini Pump - Self Priming Pump For Salt Chlorinated Pools - World of Pools

Certikin Mini Pump .25hp

by Certikin
£310.00
  • .25hp Self Priming Pool Pump
  • Designed For Small To Medium Pools
  • Reduced Footprint Same Massive Power
  • 2 Year Warranty
  • Suitable For Salt Chlorinated Pools
  • Replacement For HKV Pump

 

DELIVERY: Certikin Mini Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Certikin Mini Pump has been manufactured to be the perfect pump choice for small to medium sized pools. This is a replacement to the Certikin HKV Pump. Whether the pool is Above Ground or Inground, Chlorine or Salt Water the Certikin Mini Pump will be the ideal replacement for any previous pump.

Power has not been lost by reducing the footprint of the pump, with the 0.25HP Pump supplying 9 m3/h ideal if you have a heat pump as your heating source.

The technology of Certikin's other pumps has been used, with a Noryl impellor to reduce noise and the stainless steel shaft to improve the durability.

If you are looking for a high spec pump for not a lot of money then the Certikin Mini Pump, which is the direct replacement for the HKV Pump, should be your first choice.

As with all Certikin products they have a warranty cover you would expect, 2 Years.

Call us on 01322 554 870 if you would like to discuss which pump is suitable for your pool.

 

iFlo Swimming Pool Pump - World of Pools

iFlo Pool Pump .75hp

by World Of Pools.com
£289.00
    • iFlo Pool Pump .75hp
    • Iflo is a replacement for Sta Rite 5P2R
    • Great value pool Pump
    • Ultra quiet and simple to install

 

DELIVERY: iFLO Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: iFLO Swimming Pool Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

iFlo Pool Pump .75hp

The iFLo .75hp Swimming Pool Pump is a direct replacement for the StaRite 5P2R and is great value for money.The iFlo Pool Pumps have a heavy duty, air cooled motor and robust pump casing has been engineered to last which means it has a failure rate of virtually zero.

The iFlo Pool Pump have a proven reliability and offer outstanding value against alternative pumps of the same quality. One great feature the iFlo pumps has is the oversized pump strainer basket, this is self-priming and has a high load impeller to allow it to cope with the most demanding of jobs. Next Day delivery available

Argonaut Swimming Pool Pump - World of Pools

Argonaut Swimming Pool Pump

by World Of Pools.com
£477.00
  • Self Priming Pump to 3 meters
  • Heavy Duty Swimming Pool Pump
  • High Grade Stainless Steel Shaft
  • Resistant to Temperature and corrosion
  • ABS Solvent Weld Unions 63mm/2" supplied with reducers for 50mm 1 1/2"
  • 3 years warranty on pump body, 2 years on motor

DELIVERY: Argonaut Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Argonaut Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Argonaut Pumps are UK made by Plastica. These are domestic swimming pool pumps that come in standard sizes. The Plastica Argonaut pumps are available in single and 3 phase and is suitable for 1 1/2" 50mm and 63mm 2" fittings.

The Argonaut pump has great features including a large 1.75 litre strainer basket, quieter running with a  60db motor and high grade stainless steel motor shaft.

The Plastica Argonaut Pump can be used with high salt water concentration

In Stock for fast delivery. Please contact us on 01322554870 for more information, we can assist in making sure you have the correct pump to match your swimming pool filtration system and that is correct for the size of pool you have and the flow rate required 

 

Pentair Freeflo / Swimmey Swimming Pool Pump - World of Pools
    • Pentair Freeflo / Swimmey Swimming Pool Pump
    • Drop-in replacement for Pentair sta-rite swimmey
    • Large basket for more debris
    • Heavy duty motor
    • 50mm swivel union fittings
    • 90 degree rotational discharge

DELIVERY: Pentair Freeflo Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Pentair Freeflo Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Pentair Freeflo / Swimmey Swimming Pool Pump

The Pentair Freeflo is a drop in replacement for the Sta-Rite Swimmey Pump that is now no longer available. The Pentair Freeflo is a great quality pump that comes in 5 sizes, so is suitable for most domestic swimming pools from small above ground to larger inground pools that require upto 18 cubic meters p/h flow rate.

The Pentair Freeflo has a thick walled body, transparent lid and has highly engineered hydraulics that make this rugged and tested design perfect for any pool. The new Pentair FreeFlo / Swimmey swimming pool pump is quiet running.

FreeFlo is a drop-in replacement for the Pentair Swimmey Swimming Pool Pump series. The Freeflo is self-priming and offers great value for money and normally held in stock for fast delivery

     

     

     

    Mega SS Swimming Pool Pumps - World of Pools

    Flotide SS Swimming Pool Pumps

    by World Of Pools.com
    £320.00
    • Mega Rebranded as Flotide SS Pumps For Above Ground Pools
    • Great Value and Reliable Pump
    • SS Pump is Quiet Running
    • In Stock For Immediate Delivery
    • 1.5" Glued Socket Connection
    • 1 Year Warranty

    DELIVERY: Mega SS Pool Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Mega SS Pool Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    .

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    SS Flotide Swimming Pool Pumps offer great value. The Flotide SS Pump has been a popular pump for a number of years offering reliability at a low cost.

    The Mega SS Pump is made from Aluminium which makes it lightweight. The Mega SS range of Pumps are ideal for small unground and above ground Swimming Pools.

    We hold these pool pumps in stock for fast next working day delivery

     

    Mega SC Swimming Pool Pumps - World of Pools

    Flotide Mega SC Swimming Pool Pumps

    by World Of Pools.com
    £249.00
    • Flotide SC Swimming Pool Pumps For Medium Sized Pools
    • Self Priming Great Value Reliable Pump
    • Quiet Running
    • In Stock For Fast Next Working Day
    • 1.5" Glued Socket Connection
    • 1 Year Warranty

    DELIVERY: Flotide SC Pool Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Flotide SC Swimming Pool Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Flotide Mega SC Swimming Pool Pumps

    The Flotide SC Swimming Pool Pumps are a popular pump that offers excellent value for money. These are self priming pumps that are available in .5hp,.75hp and 1hp so ideal for the majority of domestic swimming pools. Flotide SC Pool Pumps have a large pre-filter that help with flow and reduces the amount of time you need to empty the basket.

     

    Flotide SC Pool Pumps have a threaded union fitting that takes metric (50mm) and imperial pipework (1.5"). Flotide SC Pumps are vey reliable, have a low energy consumption and are quiet. We hold these pumps in stock for for fast delivery 

    Certikin Mini Pump - Self Priming Pump For Salt Chlorinated Pools - World of Pools

    Certikin Mini Pump .33hp

    by Certikin
    £328.00
    • .33hp Self Priming Pool Pump
    • Designed For Small To Medium Pools
    • Reduced Footprint Same Massive Power
    • 2 Year Warranty
    • Suitable For Salt Chlorinated Pools
    • Replacement For HKV Pump

     

    DELIVERY: .33hp Certikin Mini Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Certikin Mini Pump .33hp

    Certikin Mini Pump has been manufactured to be the perfect pump choice for small to medium sized pools. This is a replacement to the Certikin HKV Pump. Whether the pool is Above Ground or Inground, Chlorine or Salt Water the Certikin Mini Pump will be the ideal replacement for any previous pump.

    Power has not been lost by reducing the footprint of the pump, with the 0.25HP Pump supplying 9 m3/h and the Certikin Mini Pump 0.75HP model 13 m3/h, ideal if you have a heat pump as your heating source.

    The technology of Certikin's other pumps has been used, with a Noryl impellor to reduce noise and the stainless steel shaft to improve the durability.

    If you are looking for a high spec pump for not a lot of money then the Certikin Mini Pump, which is the direct replacement for the HKV Pump, should be your first choice.

    As with all Certikin products they have a warranty cover you would expect, 2 Years.

    Call us on 01322 554 870 if you would like to discuss which pump is suitable for your pool.

     

    Certikin Mini Pump - Self Priming Pump For Salt Chlorinated Pools - World of Pools

    Certikin Mini Pump .50hp

    by Certikin
    £346.00
    • .50hp Self Priming Pool Pump
    • Designed For Small To Medium Pools
    • Reduced Footprint Same Massive Power
    • 2 Year Warranty
    • Suitable For Salt Chlorinated Pools
    • Replacement For HKV Pump

     

    DELIVERY: Certikin Mini Pumps .50hp are sent out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Certikin Mini Pump .50hp

    .50hp Certikin Mini Pump has been manufactured to be the perfect pump choice for small to medium sized pools. This is a replacement to the Certikin HKV Pump. Whether the pool is Above Ground or Inground, Chlorine or Salt Water the Certikin Mini Pump will be the ideal replacement for any previous pump.

    Power has not been lost by reducing the footprint of the pump, ideal if you have a heat pump as your heating source.

    The technology of Certikin's other pumps has been used, with a Noryl impellor to reduce noise and the stainless steel shaft to improve the durability.

    If you are looking for a high spec pump for not a lot of money then the Certikin Mini Pump, which is the direct replacement for the HKV Pump, should be your first choice.

    As with all Certikin products they have a warranty cover you would expect, 2 Years.

    Call us on 01322 554 870 if you would like to discuss which pump is suitable for your pool.

     

    Certikin Mini Pump - Self Priming Pump For Salt Chlorinated Pools - World of Pools
    • .75hp Self Priming Pool Pump
    • Designed For Small To Medium Pools
    • Reduced Footprint Same Massive Power
    • 2 Year Warranty
    • Suitable For Salt Chlorinated Pools
    • Replacement For HKV Pump
    • 0.25HP to 0.75HP Models

     

    DELIVERY: Certikin .75hp Mini Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Certikin Mini Pump .75hp Swimming Pool Pump

    Certikin .75hp Mini Pump has been manufactured to be the perfect pump choice for small to medium sized pools. This is a replacement to the Certikin HKV Pump. Whether the pool is Above Ground or Inground, Chlorine or Salt Water the Certikin Mini Pump will be the ideal replacement for any previous pump.

    Power has not been lost by reducing the footprint of the pump, with the Certikin Mini Pump 0.75HP model 13 m3/h, ideal if you have a heat pump as your heating source.

    The technology of Certikin's other pumps has been used, with a Noryl impellor to reduce noise and the stainless steel shaft to improve the durability.

    If you are looking for a high spec pump for not a lot of money then the Certikin Mini Pump, which is the direct replacement for the HKV Pump, should be your first choice.

    As with all Certikin products they have a warranty cover you would expect, 2 Years.

    Call us on 01322 554 870 if you would like to discuss which pump is suitable for your pool.

     

    iFlo Swimming Pool Pump - World of Pools

    iFlo Pool Pump 1hp

    by World Of Pools.com
    £295.00
      • iFlo Pool Pump 1hp
      • Iflo is a replacement for Sta Rite 5P2R
      • Great value pool Pump
      • Ultra quiet and simple to install

     

    DELIVERY: iFLO Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: iFLO Swimming Pool Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    iFlo Pool Pump 1hp

    The iFLo 1hp Swimming Pool Pump is a direct replacement for the StaRite 5P2R and is great value for money. The iFlo Pool Pumps have a heavy duty, air cooled motor and robust pump casing has been engineered to last which means it has a failure rate of virtually zero.

    The iFlo Pool Pump have a proven reliability and offer outstanding value against alternative pumps of the same quality. One great feature the iFlo pumps has is the oversized pump strainer basket, this is self-priming and has a high load impeller to allow it to cope with the most demanding of jobs. Next Day delivery available

    iFlo Swimming Pool Pump - World of Pools

    iFlo Pool Pump 1.5hp

    by World Of Pools.com
    £317.00
      • iFlo Pool Pump 1.5hp
      • Iflo is a replacement for Sta Rite 5P2R
      • Great value pool Pump
      • Ultra quiet and simple to install

     

    DELIVERY: iFLO Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: iFLO Swimming Pool Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    iFlo Pool Pump 1.5hp

    The iFLo 1.50hp Swimming Pool Pump is a direct replacement for the StaRite 5P2R and is great value for money. The iFlo Pool Pumps have a heavy duty, air cooled motor and robust pump casing has been engineered to last which means it has a failure rate of virtually zero.

    The iFlo Pool Pump have a proven reliability and offer outstanding value against alternative pumps of the same quality. One great feature the iFlo pumps has is the oversized pump strainer basket, this is self-priming and has a high load impeller to allow it to cope with the most demanding of jobs. Next Day delivery available

    FlowVis Flow Meter 1.5" Pipe For Pools Spas Fountains & Water Features

    by World Of Pools.com
    Save 10%
    £496.80
    £449.10
    • FlowVis Flow Meter 1.5" For Pools Spas Fountains & Water Features
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 1.5" For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15V Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

    FlowVis Flow Meter For 2" Pipe For Pools Spas Fountains & Water Features

    by World Of Pools.com
    Save 10%
    £495.00
    £445.50
    • FlowVis Flow Meter For 2" For Pools Spas Fountains & Water Features
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 2" For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15V Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

    FlowVis Flow Meter For 3" Pipe For Pools Spas Fountains & Water Features

    by World Of Pools.com
    Save 13%
    £1,308.00
    £1,134.00
    • FlowVis Flow Meter For 3" For Pools Spas Fountains & Water Features
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 3" For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15V Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

    FlowVis Flow Meter 50mm + NRV For Pools Spas Fountains & Water Feature

    by World Of Pools.com
    Save 13%
    £326.40
    £283.50
    • FlowVis Flow Meter For 50mm Pipe For Pools Spas Fountains & Water Features
    • Complete With Non-Return Valve Included In The Fitting
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 50mm For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15V Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

    FlowVis Flow Meter 63mm + NRV For Pools Spas Fountains & Water Feature

    by World Of Pools.com
    Save 13%
    £326.40
    £283.50
    • FlowVis Flow Meter For 63mm Pipe For Pools Spas Fountains & Water Features
    • Complete With Non-Return Valve Included In The Fitting
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 63mm For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15V Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

    FlowVis Flow Meter For 75mm Pipe Pools Spas Fountains & Water Features

    by World Of Pools.com
    Save 13%
    £326.40
    £283.50
    • FlowVis Flow Meter For 75mm Pipe For Pools Spas Fountains & Water Features
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 75mm For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15V Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

    FlowVis Flow Meter For 90mm Pipe Pools Spas Fountains & Water Features

    by World Of Pools.com
    Save 13%
    £936.00
    £814.50
    • FlowVis Flow Meter For 90mm Pipe For Pools Spas Fountains & Water Features
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 90mm For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15V Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

    FlowVis Flow Meter For 110mm Pipe Pools Spas Fountains & Water Feature

    by World Of Pools.com
    Save 13%
    £954.00
    £830.70
    • FlowVis Flow Meter For 110mm Pipe For Pools Spas Fountains & Water Features
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 110mm For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15V Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

    FlowVis Flow Meter For 160mm Pipe Pools Spas Fountains & Water Feature

    by World Of Pools.com
    Save 14%
    £1,122.00
    £967.50
    • FlowVis Flow Meter For 160mm Pipe For Pools Spas Fountains & Water Features
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 160mm For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15X Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

    FlowVis Flow Meter For 200mm Pipe Pools Spas Fountains & Water Feature

    by World Of Pools.com
    Save 13%
    £1,392.00
    £1,211.40
    • FlowVis Flow Meter For 200mm Pipe For Pools Spas Fountains & Water Features
    • Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm
    • Maintains accuracy even with air in the system
    • Clear Easy To Read Scale In Litres Per Minute
    • Can be installed right next to other fittings with ZERO effect on accuracy
    • Can be installed horizontally, vertically or even upside-down!
    • NSF Certiified To 50PSI
    • No Calibration Required

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    FlowVis Flow Meter 200mm For Pools Spas Fountains & Water Features

    FlowVis Is A Revolution In Reliable Flow Measurement. It Is The Most Reliable, Affordable & Advanced Precision Flow Meter Designed For Specifically For Pools, Spas, Fountains & Water Features

    FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm

    No Requirement For 15X Straight Pipe Diameter

    Q: What Size FlowVis Flow Meter Will I Need?
    A: Your Pipework Will Have The Diameter Measurement Printed On It Somewhere, But If You Cannot Find It Just Gives Us A Call.

    Q: Can I Install A FlowVis Flow Meter Vertically?
    A: Yes. They Can Be Installed Vertically, Horizontally Even Upside Down.

    Q: What Sizes Does The FlowVis Flow Meter Come In?
    A: FlowVis Flow Meters Are Available In 1.5", 2", 3", 50mm, 63mm, 75mm, 90mm, 110mm, 160mm & 200mm. Just Search FlowVis In The Search Bar For The Full Range.

       
    • Certikin iSAVER Swimming Pool Pump Inverter 1.1kW
    • Suitable For Single Phase Pumps Up To 1HP
    • Cost Effective Return On Investment
    • Reduce Running Costs Up To 65%
    • Simple installation on new or retro pumps up to 1hp
    • Suitable For Single Phase Pumps Only
    • Improves filtration &Easy to install
    • Also Available As 2.2kw To Suit Pumps Up To 2hp

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.


    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    The iSAVER Inverter is a low cost solution designed to greatly reduce the running costs of pool circulation pumps and improve the efficiency of swimming pool filtration.

    Swimming pool pumps invariably run at higher flow rates than necessary. iSAVER Inverter technology enables you to control both pump flow-rates and pump run times.

    Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your pool pump by as much as 60% simply by linking your existing pool circulation pump to an inverter.

    How does it work?

    The 1.1kw iSaver Pool Pump Inverter works by allowing your single speed pool pump (1hp) to run at lower flow rates, increasing efficiency and reducing energy consumption by up to 60%.

    Single speed pool pumps tend to run at higher capacities than required and therefore are inefficient and expensive to run, without adding an inverter.

    as an example, reducing a motor speed of 2850rpm to 1950rpm can result in reducing power input from 983 watts to 295 which is over 70% less.

    Instock for fast delivery

     

       
    • Certikin iSAVER Swimming Pool Pump Inverter 2.2kW
    • Suitable For Single Phase Pumps Up To 2HP
    • Cost Effective Return On Investment
    • Reduce Running Costs Up To 65%
    • Simple installation on new or retro pumps up to 2hp
    • Suitable For Single Phase Pumps Only
    • Improves filtration &Easy to install
    • Also Available As 1.1kw To Suit Pumps Up To 1hp

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.


    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    The iSAVER Inverter is a low cost solution designed to greatly reduce the running costs of pool circulation pumps and improve the efficiency of swimming pool filtration.

    Swimming pool pumps invariably run at higher flow rates than necessary. iSAVER Inverter technology enables you to control both pump flow-rates and pump run times.

    Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your pool pump by as much as 60% simply by linking your existing pool circulation pump to an inverter.

    How does it work?

    The 2.2kw iSaver Pool Pump Inverter works by allowing your single speed pool pump (2hp) to run at lower flow rates, increasing efficiency and reducing energy consumption by up to 60%.

    Single speed pool pumps tend to run at higher capacities than required and therefore are inefficient and expensive to run, without adding an inverter.

    as an example, reducing a motor speed of 2850rpm to 1950rpm can result in reducing power input from 983 watts to 295 which is over 70% less.

    Instock for fast delivery