Blokit Self Build Swimming Pool

Build your own swimming pool with Blokit system. Simple and quick solution for building an insulated swimming pool with smooth and precise walls. Blokit system is made from EPS25 pool building bricks that are coated with 10mm of EPS80 for the inner side of the pool. 
  • Mega Pool Building Brick With Added Insulation
  • Maximum Heat Transfer U Coefficient Is 0.414Wm2/K
  • Reduce Labour Costs By 60%
  • Fully Insulated Swimming Pool
  • Reduce Running Costs By ££££'s
  • Only 0.133m3 Of Concrete Required Per 1m2 Of Wall 
  • Quick & Easy Way To Build Your Own Pool.

DELIVERY: Mega Pool Building Bricks are delivered within 2 weeks, given the size and delivery logistics for this size of Pool we will work with customer in creating best possible delivery time

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

If there is a manufacturers defect his product can be returned in its original packaging, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Mega Pool Building Bricks are similar to Blokit, but have an additional 10mm layer of Insulation giving a maximum Heat Transfer U Coefficient Is 0.414Wm2/K.

Building your swimming pool with the Mega Pool Building Brick will allow you to quickly complete the project with the least amount of overdig, reducing costs, time and the impact on your garden.

The Build is quick and efficient, with the hollow blocks allowing for Re-Bar reinforcing steel to be added, then the concrete poured. And to help reduce costs even more each 1m2 section of wall only requires 0.133m3 of concrete.

Once the pool walls are built we would recommend finishing the pool with an On-Site Liner, offering ease, strength, longevity and beauty in one simple Waterproofing process.

If you would like to discuss or find out more about the Mega Pool Build Brick please call us on 01322 554 870

Each Layer of Mega Pool Building Bricks requires 8 End Pieces

Number Of Blocks Required For Pools With A 1.25m Wall Height

 

 WIDTH LENGTH 4M LENGTH 5M LENGTH 6M  LENGTH 7M LENGTH 8M LENGTH 9M LENGTH 10M
3M 75 85 95 105 115 125 135
4M 85 95 105 115 125 135 145
5M 95 105 115 125 135 145 155
6M 105 115 125 135 145 155 165
7M 115 125 135 145 155 165 175
8M 125 135 145 155 165 175 185

 

Thermostone Plus PS80/40 Insulated Swimming Pool Build Block

by World of Pools
Save 17%
£47.90
£39.60
  • Thermostone Plus Insulated Swimming Pool Building Blocks PS80/40
  • Quick Swimming Pool Construction, Reducing Labour Costs By 65%
  • Smooth, Indent Resistant Walls - Additional PS80 Layer On Internal Wall
  • Lightweight Materials Means No Physical Straining
  • 3.33 pieces/m² (10 blocks for every 3 square metres)
  • 0.14 m³ concrete per m² formworks
  • Good Insulation With Thermal Rating Of 0.32W/M²/K
  • Dimensions : 1000 mm x 250 mm x 300 mm

PRODUCT INFO:

Thermostone Plus - Reliable – Insulating – Quick Assembly

Thermostone Plus is a formwork which is made from expanded polystyrene, allowing the basic pool to be constructed from lightweight blocks, strengthened with steel rebar & then the internal cavities are filled with concrete.

The insulation value of Thermostone Plus block system is much higher than standard construction methods, which means lower heating costs & huge savings on energy.

Unlike other block systems Thermostone Plus Blocks allow the concrete fill to be pumped in up to a depth of 1.75m.

Thermostone Plus PS80/40 have similar characteristics to the original PS40 blocks, but the PS80/40 have an additional layer of PS80 on the pool side, resulting in an exceptionally hard pool wall surface that resists dings, dents and deformities
Calculation Example Number Of Blocks Required As Well As Concrete Filling
POOL DIMENSIONS (W X L X D) THERMOSTONE PLUS QUANTITIES
250cm x 500cm x 150cm 80 Blocks / 3.5m3 Concrete
300cm x 600cm x 150cm 95 Blocks / 4.2m3 Concrete
350cm x 700cm x 150cm 110 Blocks / 5.0m3 Concrete
400cm x 800cm x 150cm 125 Blocks / 5.5m5 Concrete
400cm x 1000cm x 150cm 145 Blocks / 6.5m3 Concrete
450cm x 900cm x 150cm 140 Blocks / 6.0m3 Concrete
500cm x 1000cm x 150cm 160 Blocks / 7.0m3 Concrete
 600cm x 1200cm x150cm 185 Blocks / 8.0m3 Concrete

F.A.Q: ALL THE ANSWERS YOU NEED TO MAKE AN INFORMED DECISION

Q: How Are Thermostone PS80/40 Installed?
A: Thermostone PS80/40 Blocks Are Laid On Top Of A Reinforced Concrete Base, With The Initial Row Bed In Mortar. Each Additional Row Is Then Glued Onto The Row Below. Rebar Is Run Through The Internal Gaps Until The Desired Pool Height Is Reached, Then Concrete Is Pumped Into The Cavities.

Q: What Size Are The Blocks
A: Thermostone Plus PS80/40 Blocks Are 1000mm Long X 300mm High X 250mm Wide

Q: What Size Are Thermostone Plus PS80/40 Blocks?
A: Each Block Is 1000mm Long x 300mm High x 250mm Wide.

Q: What Is The Thermal Rating Of Thermostone Plus PS80/40 Blocks?
A: The Thermal Rating Is 0.32W/M2/K.

Q: How Much Concrete Will I Need?
A: You Will Need 0.14m3 Of Concrete Per M2 Of Thermostone Plus Formwork.

PDF DOWNLOADS:
Insert Download

DELIVERY: We aim to send thermostone plus blocks within 5 days. Stock items are normally sent same day, and delivery made between 2-3 days

RETURNS: 

thermostone plus blocks are produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturing defect 

If there is a manufacturing defect on the thermostone plus block it can be returned in its original packaging, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.


When we receive the (product), our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.