Hot Tub Chemicals

Large stock of Hot Tub chemicals available for next day delivery. We stock Fi Clor, Relax by Plastica & Champion chemicals, including Chlorine, pH Increaser, pH Reducer, Clarifier and other spa chemicals
HTH pH Minus Micro-Balls 5kg Sold out

HTH pH Minus Micro-Balls 5kg

by HTH
Sold out
£25.95

  • 5KG HTH pH Minus Micro-Balls & Alkalinity Reducer
  • Sodium Bisulphate Reduces pH & Alkalinity 
  • Fast Dissolving HTH Swimming Pool Chemicals
  • Rebranded From Fi Clor
  • For Use In Swimming Pools Or Hot Tub Spas
  • Fast Delivery

DELIVERY: HTH pH Minus Micro-Balls 5kg will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: HTH pH Minus Micro-Balls 5kg can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.


.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

 

 

PRODUCT INFO:

HTH pH Minus Micro-Balls 5kg comes in a 5kg container. Depending on the how it is used to dose your swimming pool or hot tub, HTH pH Minus Micro-Balls 5kg will lower either the pH or the Total Alkalinity in the water. High pH will cause cloudy water and can be a factor in scale formation. High pH may also reduce the sanitisation effectiveness of chlorine. Swimming Pool & Hot Tub water with a high alkalinity reading will be difficult to lower the pH as any chemicals designed to lower pH will automatically will be used up by the buffering action of the alkalinity.

Instructions To Correct High pH Levels in Swimming Pools or Hot Tubs using HTH pH Minus Micro-Balls 5kg

Test your pool water using your prefered testing method. If higher than 7.6 you will need to lower it

With the pumps and filtration running, sprinkle the amount suggested on the label of HTH pH Minus Micro-Balls 5kg evenly around the pool, avoiding the skimmer areas. Do not dose more than 500g at any one time. If more than 500g is required repeat the process after 24 hours.

Leave the filtration running and re-check the pH levels after 24 hours. If required redose with HTH pH Minus Micro-Balls 5kg

Instructions To Correct High Alkalinity Levels in Swimming Pools or Hot Tubs using HTH pH Minus Micro-Balls 5kg

Calculate your pool water volume, if in doubt call us and we can advise you.

Test your pool water using your preferred testing method. If the Total Alkalinity reading is higher than 150 mg/l (ppm) you will need to lower it.

With the Pump & Filtration OFF pour 1kg, in 200g increments, into one area at the deepest end of the pool, away from the skimmers. Each 1 kg dose should reduce the Alkalinity levels by 10-20 mg/l  (ppm)

After 24 hours re-test the swimming pool or hot tub and if the Total Alkalinity reading is still above 150 ppm then repeat the dose until the level is correct.

HTH pH Plus Powder 5kg - pH Increaser

by HTH
Sold out
£22.00

  • HTH pH Plus Powder pH Increaser For Swimming Pools
  • Rebranded From Fi Clor pH Increaser 
  • Fast Dissolving Soda Ash
  • For Use In Pools Or Hot Tub Spas
  • Powder Formula So No Residue

DELIVERY: HTH pH Plus Powder 5kg is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: HTH pH Plus Powder 5kg can be returned unused & in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

HTH pH Plus Powder 5kg is used for raising the pH levels in your swimming pool or hot tub spa. Maintaining the correct pH levels in the water is important as low pH levels can cause eye and skin irritation and cause corrosion and damage pumps, heaters and even the pool finish.

pH levels show whether the water is Acidic or Alkali. Low is Acidic and High is Alkali

Instructions To Correct Low pH Levels in Swimming Pools using HTH pH Plus Powder 5kg

Test your pool water using your preferred testing method. If lower than 7.2 you will need to raise it

Dissolve the amount suggested on the label of HTH pH Plus Powder 5kg in a 10 litre bucket. Do not dissolve more than 500g at any one time. If more than 500g is required repeat the process.

With the pumps running pour the mixture evenly around the pool, but not into the skimmers.

Leave the filtration running and re-check the pH levels after 24 hours. If required redose with HTH pH Plus Powder 5kg

7kg Relax pH Minus

7kg Relax pH Minus

by HTH
£17.95

  • Relax pH Minus 7kg For Swimming Pools 
  • Fast Dissolving Relax Swimming Pool Chemicals
  • For Use In Swimming Pools Or Hot Tub Spas
  • Next Working Day Delivery

 

DELIVERY: Relax 7kg pH minus will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Relax 7kg pH minus can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

 

 

PRODUCT INFO:

Relax 7kg pH Minus swimming pools is used to reduce the pH when the levels are too high. 

Relax pH 7kg Minus will correct high levels of pH (above 7.6) or alkalinity (above 160mg/l). High pH or alkalinity will lead to problems with cloudy water and scaling of surfaces and pipework. High pH will make chlorine sanitisers less effective and high alkalinity can make it difficult to adjust the pH