Swimming Pool Heat Pumps

Swimming Pool Heat Pumps are the most popular pool heating method. We sell standard heat pumps with the latest R32 Gas and the latest Inverter Heat Pumps. Inverter Swimming Pool Heat Pumps offer substantial savings with COP of upto 15. Inverter Heat Pumps are also Ultra Quiet. World Of Pools only sells the heat pumps that we have checked and tested ourselves. We stock Hydropro, Waterco, Calorex, DanthermHeatseeker, Rio & Garden Pac. Norsup full inverter heat pumps are available from our retail shop.  Call us for more information, we know our heat pumps inside out, trust their reliability and can recommend with conviction which will be best for you and how you use your pool.
  • Poolstyle Mini Above Ground Pool Plug & Play Heat Pump
  • 2022 Limited Stock Now Available
  • Very Limited Stock Of Poolstyle Mini Available For 2022
  • Works When Air Temperature Is Over 10°C
  • Heat Pump For Larger Intex, Bestway & Other Above Ground Pools
  • Suits Pools Up To 18ft x 48" Round Or 18ft x 9ft Rectangular - 35m3
  • 2 Year Full Replacement Warranty

DELIVERY: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

PRODUCT INFO:

The Poolstyle Mini Plug & Play Heat Pumps come in two sizes for the larger Intex & Bestway above ground pools. The 6kw Poolstyle Mini Heat Pump is perfect for pools up to 25m3, such as an Intex 15ft x 48" Metal Frame Pool, whilst the 8kw Poolstyle Mini Heat Pump is ideal for pools up to 35m3, such as a 18ft x 48" Metal Frame Pool. Only suitable for pool heating during the main Summer months. A Solar Cover must be used too. Buy Now For Same Day Despatch.

Poolstyle Mini Plug & Play Heat Pumps For Above Ground Pools are designed purely for the larger above ground pool market. Intex, Bestway & Summer Escapes pools are perfect for this heat pump

The minimum Flow rate from your pool pump is 2m3/hr to start the Poolstyle Mini Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

Digital Heating Control Panel - Control Heating Up To 40°C

No ByPass Required if using small Intex pumps

The Poolstyle Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible at night.

The Poolstyle Mini 6kw Above Ground Pool Heat Pump is for pools up to 25m3

The Poolstyle Mini 8kw Above Ground Pool Heat Pump is for pools up to 35m3

Below are suggestions for above ground pool sizes that the Poolstyle Mini Heat Pumps are suitable for

Metal Frame Pools

6kw - 10ft x 30 inch Metal Frame Pool
6kw - 12ft x 36 inch Metal Frame Pool
6kw - 12ft x 48 inch Metal Frame Pool
8kw - 15ft x 48 inch Metal Frame Pool
8kw - 18ft x 48 inch Metal Frame Pool

 

Easy Set Pools

6kw - 8ft x 30 inch Easy Set Pool
6kw - 10ft x 30 inch Easy Set Pool
6kw - 12ft x 30 inch Easy Set Pool
6kw - 12ft x 48 inch Easy Set Pool
8kw - 15ft x 48 inch Easy Set Pool
8kw - 18ft x 48 inch Easy Set Pool
8kw   -  21ft x 48 inch Easy Set Pool

 

Rectangular & Oval Framed Pools

8kw - 14ft x 8ft x 48 inch Pool
8kw - 18ft x 9ft x 48 inch Pool
8kw - 18ft x 10ft x 48 inch Pool
    • Flotide A10 9.6kw Above Ground Pool Heat Pump
    • Plugs Into A 13 amp Socket with a fitted RCD Plug
    • In Stock - 2-3 day lead time
    • Perfect Heater For Larger Intex & Bestway Pools
    • No Electrician Costs Needed To Hardwire In
    • Costs Less To Run Than A 3kw Bestway Electric Heater
    • 2 Years Parts & Labour Warranty 

    DELIVERY: Flotide A10 Plug & Play Above Ground Pool Heat Pumps are sent out on a 2 working day service

    RETURNS: Flotide A10 9.6kw Plug & Play Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

    PRODUCT INFO:

    Flotide A10 Plug & Play 9.6kw Above Ground Pool Heat Pumps are designed for larger Intex & Bestway pools, up to 30,000 litres. This would equate to a 20ft x 12ft Bestway pool.

    Flotide A10 Plug & Play Heat Pumps have an exceptionally high COP of 6, meaning you can get up to 6 times more heat into your pool than it will cost you in electricity.

    Flotide A10 Plug & Play Heat Pumps will function down to an air temperature of 5°C, but as with any heat pump, the warmer the air the more efficient they are and the more heat transferred into your pool. The warmer the air the better!!

    CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

    When purchasing a heat pump large enough for your pool you would usually have to take into account the cost to be hard wired into mains by and electrician on its own spurs and RCD. The Flotide A10 Plug & Play Above Ground Pool Heat Pump is reasonably priced, user friendly and runs from a standard UK 13amp 3-pin plug. Everything you could want from a heat pump unit for an above ground swimming pool. 

    Below is a guide that is is based on summer use with a good solar cover being used. 

     

    Flotide A10 Plug & Play Above Ground Pool Heat Pump pools - Pools up to 30m3

    Minimum Flow rate required 5.5m3/hr 

    Supplied with 50mm sockets to connect to a bypass kit or hosetails. These can be purchased separately

    We can also assist with the correct fittings you may need to install this heater. Fittings will depend on the make and model of your pool and how far away from the pool you want the heat pump situated. Please call us on 01322554870 for help and advise on heat pump installations

    CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

    Hydropro P14 Swimming Pool Heat Pump - World of Pools
    • Hydropro P14 Swimming Pool Heat Pumps
    • In Stock For Same Day Despatch
    • Sale Prices - Cheapest Online Or We Match Price
    • Suitable For All Year Use If Sized Correctly - Call For Advice
    • 2 Year Parts & Labour Warranty

    DELIVERY: Hydropro P14 Swimming Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Hydropro P14 Heat Pump is the latest Swimming Pool Heat Pump available with R32 Gas. The hydropro heat pumps are ideal for swimming pools up to 50m3 during the main summer months, slightly less if starting in April or the beginning of May.

    As the Hydropro P14 Heat Pump will function down to -5° Celcius they can be used all year round. To function correctly it will need to be sized correctly. As a rough guide double the Ideal Size, but it is best if you call us on 01322 554 870

    Hydropro P14 Heat Pump

    Ideal Size Pool 28ft x 14ft x 4ft Deep

    Maximum Pool Size 28 ft x 14ft x 5ft Deep

    To see other sizes of hydropro heat pumps click here. Full Range Of Heat Pumps

    For help and advice call 01322 554 870

     

    Hydropro P14/32 Heat Pump Data

     

    heating power input

    2.35 kW

    heating capacity (A27/W27)

    13.5 kW

    heating capacity (A15/W26)

    9.8 kW

    maximum volume of pool

    with good insulation

    60m3 /

    60,000 litres

    coefficient (C.O.P.)  at A27/W27

    5.74

    coefficient (C.O.P.)  at A15/W25

    4.52

    compressor

    rotary

    refrigerant

    R32

    fan quantity

    1

    fan power input

    120

    fan rotate speed

    850 RPM

    fan direction

    Horizontal

    noise level (10 metres)

    43 dB (A)

    water connection

    50mm

    nominal water flow

    5.3 m/h3

    dimensions (L/W/H)

    116cm / 47cm / 87cm

    Type C or D Breaker Size 20 amp
    • Hydropro Inverter PX "All Year Round" Heat Pump
    • Energy Efficient Heater 'A' Rated R32 Gas
    • Functions down to -15° C
    • Suitable For Pools up to 150,000 litres
    • 2 Year Parts & Labour Warranty
    • Power/ Smart / Silent Modes Will Reduce Energy Costs
    • C.O.P. Up To 13
    • ABS Cabinet
    • Low Noise Rotary Compressor & Fan Titanium Heat Exchanger
    • Automatic Defrost - For Colder Weather

     

    DELIVERY: Hydropro Inverter Swimming Pool Heat Pumps are delivered by a specialist haulier and take 1-3 days to arrive. 

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Hydro-Pro Inverter Heat Pumps offer massive savings during the Sumer months when compared to other heat pumps. With C.O.P.s of up to 13 the Hydropro Inverter Heat Pumps are not only quiet but are one of the most advanced in technology. Using R32 Gas they are not only better for the environment than older style heat pumps but dramatically more effective too.

    If you are looking to buy a heat pump for the future as well as for now the Hydropro Z Inverter range is suited to you.

    With each £1 of power input you can have an output of up to £13 when in Silent Mode.

    Having three settings the Hydropro Inverter Heat Pump can offer Super Quiet running whilst in the Silent Mode, ideal if running overnight or during the main Summer months. The Smart Mode uses al three modes to maintain your pool at a set temperature and the Powerful Mode is ideal when opening your pool or after inclement weather.

    Hydro-Pro Inverter Type heat pumps are very quiet running as the use a variable speed motor along with a low noise DC Inverter rotary compressor and fan.

    Anti-Vibration Rubber Pads which fit under the four feet on the unit will help even further to reduce noise.

     Heat Pump Model

    Maximum Pool Size

    Hydropro Inverter PX7/32

    30,000 Liters

    Hydropro Inverter PX11/32 45,000 Litres
    Hydropro Inverter PX14/32 60,000 Litres

    Hydropro Inverter PX17/32

    75,000 Litres

    Hydropro Inverter PX21/32

    90,000 Litres

    Hydropro Inverter PX25/32

    Hydropro Interter PX30/32

    120,000 Litres

    150,000 Litres

     

    All Hydropro PX Type Inverter Heat Pumps are fitted with an automatic defrost and the ability to work down to -5 C, giving you 12 month, all year round heating of your indoor pool. With three settings, 'Power', 'Smart' & 'Silent' allowing you to adjust the output to suit weather conditions, saving you up to 30% in running costs, you will find the Hydropro PX Inverter Heat Pumps will suit your needs perfectly.

     

    If you are planning to use your Hydropro PX Type Inverter Heat Pump for Summer or Extended Season only, then using the guide above will help. But if you want to size your Hydro-Pro Inverter heat pump correctly for All Year Round use, please call us on 01322 554 870 as there are a number of factors we need to be taken into account before we can correctly advise which model you will need. These will include pool size, hours used per day, preferred water temperature and whether the pool is insulated.

    Sizing an all year round swimming pool heat pump uses different parameters than a standard model, so calling us on 01322 554 870 before ordering is essential.

    • Garden Pac Invertech Swimming Pool Heat Pump With Wi-Fi 
    • Quietest Swimming Pool Heat Pump In The UK
    • 2022 Models 10 Times Quieter Than Most Heat Pumps 
    • Inverter Heat Pump Technology - Complete Variable Speed - Not Stepped
    • COP up to 15 - Operates Down To -7° C - R32 Gas With Soft Start
    • 7 Year Titanium Heat Exchanger & Mitsubishi Compressor Warranty
    • 2 Years Parts Warranty

    DELIVERY: Garden Pac Invertech InverterHeat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Garden Pac Invertech Inverter Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a returned Garden Pac Inverter Heat Pump is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Garden Pac Invertech Heat Pumps are the quietest Swimming Pool Heat Pump in the UK.  Buy now for a Next Working Day delivery.

    The new 2021 model Garden Pac Invertech Heat Pumps takes inverter heat pump technology to the next level. Making them Super Quiet and Super Efficient. Each Heat Pump also comes with a Wi-Fi connection, controlled using a Smart Phone App.

    Each Garden Pac Heat Pump has a Twin-Rotary Mitsubishi DC Inverter Compressor. This innovative technology is based on the "Twin Mechanism" solution where two rotors work in sync to reduce the shaking, found in all heat pumps caused by the compressor, by balancing the tork, along with a DC brushless fan motor, with low noise and very low power usage. This has the benefits of not only an exceptionally quiet operation but also extremely high efficiency. 

    As in the previous incarnation of the Garden Pac Invertech Heat Pump the unit will operate down to -7 degrees, although heat output will obviously be restricted at this temperature. During the main Summer months with an air temperature of  26° C, the Garden Pac can offer a COP of up to 15.

    The Garden Pac Invertech heat pump will be able to offer you a 12 Month  Swimming Season or just an Extended Season swimming pool heating system. It is all dependant on the sizing of the Heat Pump. So, if you require an Ultra Quiet, Super-Efficient heat pump for all year round use or only to extend the Summer season call us to help you decide which Garden Pac Invertech is best suited for your needs.

    As a Swimming Pool Heat Pump should be a long term investment it is important to not only look at the price but also the quality. Although the Garden Pac Inverter Heat Pump is dearer than standard heat pumps it is cheaper than its comparable Inverter models with the same technology. Some Inverter heat pumps are "stepped" variable speeds, but the Garden Pac is a complete variable speed, offering the quietest and most efficient performance. You will want your Heat Pump to last a long time, so it makes sense to buy one that is at the forefront of technology when you do. 

    The Garden Pac Invertech Inverter Heat Pump functions in temperatures as low as -7° Celsius, but as with all heat pumps they operate most efficiently when the air temperature is above 15° Celsius, providing a cop of up to 15 when the air temperature is at a balmy 26° Celsius. It is important to remember that the Garden Pac will draw the warm ambient air temperature from the reverse of the unit and blow the cold waste air horizontally from its fan. This means the Heat Pump requires a reasonable amount of space around it.  We would recommend a minimum of 500mm around the back, 750mm sides and at least 3 metres to the front. The Garden Pac should not be enclosed in a shed or other structure restricting air-flow to and away from the unit. 

    The Inverter Garden Pac Heat Pumps come with a Green ABS cabinet, not only to protect it all year round from the UK weather conditions but also to blend into the garden area, the free of charge winter cover also comes in green so the Garden Pac will be hidden all year round.

    You may not require your pool heated in low temperatures but having a heat pump that will not freeze up or cut off at 10° or 5° degrees can be a huge benefit, as April and October mornings may be a lot cooler, even though you may not be using your pool you will still need to heat it to be able to use your pool in the afternoons when it is sunny and warm. 

    If you require help sizing your heat pump for your pool please call us on 01322 554 870

    Garden Pac Inverter Heat Pump PDF Downloads

    Garden Pac Invertech Heat Pump With Wi-Fi Brochure

    Garden Pac Invertech Heat Pump With Wi-Fi Installation Manual

    Model

    Power Output  At Air 26° C

    Max Pool Size (m3)

     Power Input & Output At Air 15°C

    GHD-150-0251

    10.3kw

    25-45 m3

    0.19kw – 1.5kw

    7.1kw

    GHD-150-0252

    12.8kw

    35-65 m3

    0.27kw – 2.2kw

    8.3kw

    GHD-150-0254

    17.3kw

    40-75 m3

    0.33kw – 2.6kw

    11.5kw

    GHD-150-0255

    20.3kw

    50-95 m3

    0.38kw – 3.3kw

    14kw

    GHD-150-0256

    27.3kw

    65-120 m3

    0.57kw – 3.8kw

    18kw

    (3-Phase) - 

    GHD-150-0258

    27kw

    65-120 m3

    0.53kw – 3.9kw

    18kw

    Hydropro P12 Swimming Pool Heat Pump - World of Pools
    • Hydropro P12 Swimming Pool Heat Pumps
    • In Stock For Same Day Despatch
    • Sale Prices - Cheapest Online Or We Match Price
    • Suitable For All Year Use If Sized Correctly - Call For Advice
    • 2 Year Parts & Labour Warranty

    DELIVERY: Hydropro P12 Swimming Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Hydropro P12/32 heat pumps are suitable for swimming pools up to 40m3 during the main summer months, slightly less if starting in April or the beginning of May. As the Hydropro P12 Heat Pump is one of the newest ranges of Swimming Pool Heat Pumps available they are supplied with R32 Gas

    As the Hydropro P14 Heat Pump will function even when the ambient air temperature is as low as 0° Celcius they can be used all year round, but with reduced C.O.P. and output. To function correctly the heat pump will need to be sized correctly. As a very rough guide, it is suggested to at least double the Ideal Size, but it is advisable if you call us on 01322 554 870 to ensure suitability.

    Hydropro P12 Heat Pump - Summer Use 

    Ideal Size Pool 24ft x 12ft x 4ft Deep

    Maximum Pool Size 24 ft x 12ft x 5ft Deep

    To see other sizes of hydropro heat pumps click here. Full Range Of Heat Pumps

    For help and advice call 01322 554 870

     

    Hydropro P12/32 Heat Pump Data

     

    heating power input

    1.95 kW

    heating capacity (A27/W27)

    11.5 kW

    heating capacity (A15/W26)

    6.5 kW

    maximum volume of pool

    with good insulation

    40m3 /

    40,000 litres

    coefficient (C.O.P.)  at A27/W27

    5.90

    coefficient (C.O.P.)  at A15/W25

    4.59

    compressor

    rotary

    refrigerant

    R32

    fan quantity

    1

    fan power input

    90

    fan rotate speed

    850 RPM

    fan direction

    Horizontal

    noise level (10 metres)

    43 dB (A)

    water connection

    50mm

    nominal water flow

    4.5 m/h3

    dimensions (L/W/H)

    100cm / 39cm / 60cm

    Type C or D Breaker Size 15 amp
    Hydropro P8/32 Swimming Pool Heat Pump - On/Off - World of Pools
    • Hydropro P8/32 Swimming Pool Heat Pump 
    • Suitable For All Year Use If Sized Correctly - Call For Advice
    • Hydropro P8 - Maximum 30m3 Pool - Summer Use
    • 2 Years Parts & Labour Warranty
    • 7 Years Compressor & Heat Exchanger Warranty
    • We Price Match & Ship Same Day

    DELIVERY: Hydropro P8/32 Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Hydropro P8/32 Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Hydropro P8/32 Heat Pump is ideally sized for a 15ft x 48" Above Ground Pool to extend the Swimming season from May to September. A good Solar Cover must be used in conjunction with the heater

    Hydro Pro P8 Heat Pump

    Ideal Pool Size 15ft x 48" Round

    Maximum Pool Size 20ft x 12ft x 4ft Oval

    Hydropro P8 Swimming Pool Heat Pumps are capable of both heating and cooling and will perfectly suit small pools with a maximum volume of water of 30m3 if used during the main summer months. Outside of the main Summer months, the heat pump should be used on smaller pools. Realistically, the Hydropro P8 could heat a pool with a capacity of 15m3 All Year Round, if insulated properly.

    Using the Hydropro P8/32 to heat your pool for an extended season of May to September we would suggest that your pool is a maximum size of 15ft round x 48" deep.

    The HydroPro P range of heat pumps has a working ambient air temperature of  –5 degrees Celcius, although at this temperature reduced C.O.P. and output is reduced. It might not seem that you need to heat your pool in low temperatures but having a Swimming Pool Heat Pump that will not cut out when the air temperature reaches 8 or 10 degrees Celcius has huge benefits at the beginning and end of the Extended Swimming Season. At these times of the year the morning and evening air temperatures can be as low as 5 degrees Celcius. When other heat pumps will stop working the Hydropro P8/32 will still be heating your pool for you to use whenever you want to. 

    Outside installation is required for the Hydropro P8 to function correctly. Reduced airflow, both in or out, will dramatically reduce performance

    With over 15 Years experience sizing and supplying Swimming Pool Heat Pumps we can provide Expert advice and save you a massive 80% on your heating bills. The Hydropro P8/32 Swimming Pool Heat Pump is despatched on the Same Day as ordering.

    For help and advice on sizing your heat pump correctly call 01322 554 870

    Hydropro P8/32 Swimming Pool Heat Pump - Users Manual English

    Hydropro P8/32 Swimming Pool Heat Pump - COP Curve

     

     Hydropro P Series Heat Pump Diagram

    Hydropro P8/32 Heat Pump Data

     

    heating power input

    1.32 kW

    heating capacity (A27/W27)

    8.31 kW

    heating capacity (A15/W26)

    5.71 kW

    maximum volume of pool

    with good insulation

    30m3

    30,000 Litres

    running current

    5.9 AMPS

    coefficient (C.O.P.)  at A27/W27

    6.34

    coefficient (C.O.P.)  at A15/W25

    4.33

    compressor

    rotary

    refrigerant

    R32

    fan quantity

    1

    fan power input

    80

    fan rotate speed

    850 RPM

    fan direction

    Horizontal

    noise level (10 metres)

    42 dB (A)

    water connection

    50mm

    nominal water flow

    3 m/h3

    dimensions (L/W/H)

    95cm / 35cm / 60cm

    unit shipping dimensions (L/W/H)

    97cm  / 37cm / 62cm

    net weight/ shipping weight

    47 KG

    slow fuse current

    15  AMPS

    Hydropro P6/32 Swimming Pool Heat Pump - World of Pools
    • Hydropro P6 Swimming Pool Heat Pump 
    • Hydropro P6 Heat Pumps Are Best Suited For Pools Max 20m3 
    • New R32 Gas
    • Reliable, Efficient & Great Value For Money
    • 2 Year Parts & Labour Warranty
    • We Price Match & Ship Same Day

    DELIVERY: Hydropro P6 Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Hydropro P6 Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a Hydropro P6 Heat Pump is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Hydropro P6 Swimming Pool Heat Pumps are suitable for pools up to 20m3, which would be a maximum size of 18ft x 9ft with a depth of 4ft, during the main summer months of June, July & August. A Solar Cover must be used too.

    If it is to extend the swimming season from May to September then a Bestway or Intex 12ft x 48" pool is the maximum size pool advisable for the Hydropro P6. 

    Hydropro P6/32 Heat Pump

    Ideal Pool Size 12ft x 48" Round

    Maximum Pool Size 18ft x 9ft x 4ft deep

    Order your Hydropro P6 Swimming Pool Heat Pump now for same day despatch.


    Hydropro P6 Heat Pump Data

     

    power input

    0.97 kW

    heating capacity (A27/W27)

    5.81 kW

    heating capacity (A15/W26)

    4.12 kW

    maximum volume of pool

    with good insulation

    20 m3

    20,000 Litres

    running current

    4.5 AMPS

    coefficient (C.O.P.)  at A27/W27

    5.87

    coefficient (C.O.P.)  at A15/W25

    4.25

    compressor

    rotary

    refrigerant

    R32

    fan quantity

    1

    fan power input

    68

    fan rotate speed

    830 / 870 RPM

    fan direction

    Horizontal

    noise level (10 metres)

    39 dB (A)

    water connection

    50mm

    nominal water flow

    2.3 m/h3

    dimensions (L/W/H)

    77cm / 31cm / 58cm

    unit shipping dimensions (L/W/H)

    85cm  / 33cm / 60cm

    net weight/ shipping weight

    27 KG / 27 KG

    Power supply type c or d breaker

    15 AMPS

     

    For help and advice call 01322 554 870

    Hydropro P20 Swimming Pool Heat Pump - R32 Gas - World of Pools
    • Hydropro P 20 Heat Pump
    • New R32 Gas
    • Latest Model
    • Suitable for Pools up to 70,000 litres
    • Same Day Dispatch Fast Delivery
    • 2 Year Parts & Labour Warranty

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: The Hydropro P20 Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Hydropro P 20 Swimming Pool Heat Pumps are ideal for swimming pools up to 70m3 during the main summer months, slightly less if starting in April or the beginning of May.

    WE HAVE HYDRO S INVERTER 20KW IN STOCK click here

    Hydro Pro P20 Heat Pump

    Ideal Size Pool - 30ft x 15ft x 4ft Deep

    Maximum Size Pool - 30ft x 15ft x 5ft Deep

    The Hydropro P20 will produce roughly 20kw of energy at 27 degrees air temp and nearly 14kw at 15 degrees while only drawing 2.87kw, making it an effective cost saving heating solution for your swimming pool. The Hydropro P20 contains the latest R32 gas making it more enviromentally freindly and better performing.These heat pumps need to have good ventilation and shuould be postition in an outdoor free to allow the ambient air to be drawn in and free to allow the cold air to escape

    As an example the ideal size pool for this hydropro P20 swimming pool heat pump is a 30ft x 15ft that is 4ft deep swimming pool, although this is just a basic guide.

    For help and advice call 01322 554 870


    Hydropro P20 Heat Pump Data

     

    Power Input

    2.87 kW

    Heating Capacity (A27/W27)

    19.5 kW

    Heating Capacity (A15/W26)

    13.8 kW

    Maximum Volume of Pool

    With Good Insulation

    70m3 / 70,000 litres

    Running Current

    12.8 Amps

    Power Supply Type C or D breaker

    35 AMPS

    Coefficient (C.O.P.)  at A27/W27

    6.3

    Coefficient (C.O.P.)  at A15/W25

    4.81

    Compressor

    Rotary

    Refrigerant

    R32

    Fan Quantity

    1

    Fan Power Input

    2000

    Fan Rotate Speed

    850 RPM

    Fan Direction

    Horizontal

    Noise Level (10 metres)

    57 dB (A)

    Water Connection

    50mm

    Minimum Water Flow

    6.8 m3/h

    Dimensions (L/W/H)

    115cm / 47cm / 87cm

     

    • Hydropro P26T 3 Phase Heat Pump
    • New R32 Gas
    • Latest Model
    • Suitable for Pools up to 100,000 litres
    • Same Day Dispatch Fast Delivery
    • 2 Year Parts & Labour Warranty

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: The Hydropro P26T Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

     

    Hydropro P26T 3 Phase Swimming Pool Heat Pumps are ideal for swimming pools up to 70m3 during the main summer months, slightly less if starting in April or the beginning of May.

    Hydro Pro P26T Heat Pump

    Ideal Size Pool - 32ft x 16ft x 6ft Deep

    Maximum Size Pool - 40ft x 20ft x 4ft Deep

    The Hydropro P26T will produce over 23kw of energy at 27 degrees air temp and nearly 14kw at 15 degrees while only drawing 2.87kw, making it an effective cost saving heating solution for your swimming pool. The Hydropro P23 contains the latest R32 gas making it more enviromentally freindly and better performing.These heat pumps need to have good ventilation and shuould be postition in an outdoor free to allow the ambient air to be drawn in and free to allow the cold air to escape

    As an example the ideal size pool for this hydropro P23 swimming pool heat pump is a 32ft x 16ft that is 6ft deep swimming pool, although this is just a basic guide.

    For help and advice call 01322 554 870


    Hydropro P23 Heat Pump Data

     

    Power Input

    3.97 kW

    Heating Capacity (A27/W27)

    25.8 kW

    Heating Capacity (A15/W26)

    19.1 kW

    Maximum Volume of Pool

    With Good Insulation

    100m3 / 100,000 litres

    Power Supply Type C or D breaker

    20 AMPS

    Coefficient (C.O.P.)  at A27/W27

    6.29

    Coefficient (C.O.P.)  at A15/W25

    5.09

    Compressor

    Rotary

    Refrigerant

    R32

    Fan Quantity

    2

    Fan Direction

    Horizontal

    Noise Level (10 metres)

    57 dB (A)

    Water Connection

    50mm

    Minimum Water Flow

    9.0 m3/h

    Dimensions (L/W/H)

    105cm / 43cm / 125cm

     

    Hydro S ECO Heat Pump For Swimming Pools - World of Pools
    • Flotide Swimming Pool Heat Pump
    • Summer Season - May to August
    • Ideal Heat Pump For Summer Pools Such As Intex Or Bestway
    • Same Internal Technology As Hydropro Heat Pump
    • 2022 Models now with Digital Control
    • Frost Protection - Cuts Out Below 8°C Air Temperature
    • Same Day Dispatch & Price Match Promise

     

    DELIVERY: Flotide Swimming Pool Heat Pumps are sent by specialist hauliers and take between 1-3 days for delivery.

    RETURNS: Flotide Swimming Pool Heat Pumps can be returned unused and in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the Hydro S Swimming Pool Heat Pump, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

    PRODUCT INFO:

    Flotide Swimming Pool Heat Pumps are the least expensive heat pumps in the UK market. Manufactured to the highest European standards, the Hydro S Heat Pump is suitable for above ground or in-ground pools. One big advantage these Heat Pumps have over other systems is the low water flow rate required, so these great Heat Pumps will even work on Intex and Bestway. 2021 models come with digital display and in a smart black casing

    Flotide Heat Pumps are manufactured in the same factory and to the same high specification as the Hydropro. The latest model now have a digital display panel and come in a smart black casing.

    The Flotide Heat Pump replaced the Hydro S Heat Pump for 2022. These new heating systems are a very cost effective way of heating your pool. As the cost of electricity has risen this type of heater has now become the most popular form of heating in the UK.

    On Mainland Europe Heat Pumps have long been used to heat Pools and the Flotide Range of Heat Pumps are manufactured by a Belgium company that have long been a market leader in the industry.

    The Flotide Heat Pumps are an extremely efficient form of heating for your water with a Coefficient Of Performance (C.O.P.) of up to 4.7, which means for every £1 it costs to run you get up to £4.70 of heat transferred to the pool. Every 1kw of electricity costs on average of 14p per hour which means that running an Elecro 7.5kw Electric Heater will cost £1.05 per hour to run. Running this heater for 8 hours per day will cost £8.40 per day to run. By running a Heat Pump you can reduce these running costs by up to 80%, which means an hourly running cost of only 18p. That equates to a saving of £5.76 per day or £170 per month. Over a 5-month period you could save £850.

    7.5kw Electric Heater Costs £216 Per Month To Run, compare this against an 8kw ECO Heat Pump that costs just £28.80 Per Month To Run

    Flotide Heat Pump Can Save You £850 Per Year

    • High Coefficient Of Performance Up To 4.8
    • Extremely Compact Unit
    • Titanium Heat Exchanger
    • Precision Temperature Control Dial
    • Low Noise Compressor & Fan
    • 2 Year Warranty

    Our Opinion

    The main advantages of a Flotide heat pump are the long term savings, these will only increase as the price of electricity increases. The capital outlay is higher than an electric heater but these should be recouped within one to two years. Other forms of heating such as electric and gas are quicker and less dependent upon the weather but in general a Flotide heat pump if correctly spec'd and installed will be the best choice for most owners.

     

    For help & advice on choosing the correct heat pump for your pool please call us on 01322 554 870

    Hydro S Swimming Pool Heat Pump Sizing Dimensions

    Minimum Flow Rate For Hydro S Heat Pumps

     Hydro S Heat Pump Model Minimum Flow Rate 
    Flotide A5 Heat Pump 2.5 m3/h
    Flotide A7 Heat Pump 2.5 m3/h
    Flotide A10 Heat Pump 2.6 m3/h
    Flotide A13 Heat Pump 3.5 m3/h


    Flotide Swimming Pool Heat Pump - COP Curve Chart

    Flotide Swimming Pool Heat Pump - Users Manual

     

    The chart below is a guide to help with sizing a Hydro S Heat Pump for your above ground pool.

    Easy Set     

    Above Ground Pools

    Hydro S Swimming Pool Heat Pumps For Easy Set Above Ground Pools

    Pool Size

    Cubic Metres

    Hydro S Eco Heat Pump 

    8ft Diameter

    4.5

    Hydro S 3

    10ft Diameter

    5.90

    Hydro S 3 

    12ft Diameter

    7.80

    Hydro S 5 

    15ft Diameter

    13.40

    Hydro S 5

    18ft Diameter

    29.80

    Hydro S 7

    or

    Hydro S 10

     

      Metal Framed     

    Above Ground Pools

    Hydro S Swimming Pool Heat Pumps For Metal Frame Above Ground Pools

    Pool Size

    Cubic Metres

    Hydro S Eco Heat Pump 

    10ft Diameter

    6.70

    Hydro S 3

    12ft Diameter

    8.90

    Hydro S 5

    15ft Diameter

    17.50

    Hydro S 5 

    or

    Hydro S 7

    16ft Diameter

    22.80

    Hydro S 7

    18ft Diameter

    33.40

    Hydro S 10

    21ft Diameter 48.10 Hydro S 13
    • AG Mini 2.9kw Above Ground Swimming Pool Heat Pump
    • Plug & Play 3-Pin UK Plug With RCD Breaker
    • Plug & Play 2.9kw Heat Pump For Intex, Bestway & Above Ground Pools
    • Heats An 18m3 Pool To 30°C - Works Down To 12°C Air Temperature
    • Costs Only 8p Per Hour To Run (0.59kw/hr)
    • 2 Year Parts Warranty

    DELIVERY: AG Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: AG Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

    PRODUCT INFO:

    AG Mini Plug & Play Heat Pumps are ideal for above ground pools up to 18m3, such as an Intex or Bestway 12ft x 48" Metal Frame Pool.

    It is suitable for heating a pool of 18m3 during the main Summer months. A Solar Cover has to be used whenever the pool is not in use, especially at night as this will speed up pool heating time and reduce heat loss at night by up to 5°C. Buy Now For Same Day Despatch.

    The AG Mini Plug & Play Heat Pump requires 0.59kw of power to produce nearly 3kw of power out. That is roughly 8p an hour to get the equivalent of 40p of heat from the Poolex Nano Heat Pump into your pool making it so much cheaper to run than an electric pool heater.  You could even recoup the outlay in the first year in savings on your electricity bill.

    The minimum flow rate from your pool pump is 2m3/hr to start the AG Mini Plug & Play Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

    Digital Heating Control Panel - Control Heating Up To 30°C

    No ByPass Required if using small Intex pumps

    The AG Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

    A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible, especially at night.

    The AG Mini Plug & Play Above Ground Pool Heat Pump is suitable for pools up to 12m3 

    Below are suggestions for above ground pool sizes that the AG Mini Plug & Play Above Ground Pool Heat Pump is suitable for

     

    Bestway & Intex Metal Frame Pool Heat Pump
    10ft x 30 inch Metal Frame Pool
    12ft x 36 inch Metal Frame Pool
    12ft x 48 inch Metal Frame Pool

     

    Intex & Bestway Easy Set Pool Heat Pump
    8ft x 30 inch Easy Set Pool
    10ft x 30 inch Easy Set Pool
    12ft x 30 inch easy Set Pool
    12ft x 36 inch Easy Set Pool
    15ft x 36 inch Easy Set Pool
    15ft x 48 inch Easy Set Pool

     

    • Hydropro P23T 3 Phase Heat Pump
    • New R32 Gas
    • Latest Model
    • Suitable for Pools up to 70,000 litres
    • Same Day Dispatch Fast Delivery
    • 2 Year Parts & Labour Warranty

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: The Hydropro P23T Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

     

    Hydropro P23T 3 Phase Swimming Pool Heat Pumps are ideal for swimming pools up to 70m3 during the main summer months, slightly less if starting in April or the beginning of May.

    Hydro Pro P23T 3 Phase Heat Pump

    Ideal Size Pool - 30ft x 15ft x 6ft Deep

    Maximum Size Pool - 30ft x 15ft x 5ft Deep

    The Hydropro P23T will produce over 23kw of energy at 27 degrees air temp and nearly 14kw at 15 degrees while only drawing 2.87kw, making it an effective cost saving heating solution for your swimming pool. The Hydropro P20 contains the latest R32 gas making it more enviromentally freindly and better performing.These heat pumps need to have good ventilation and shuould be postition in an outdoor free to allow the ambient air to be drawn in and free to allow the cold air to escape

    As an example the ideal size pool for this hydropro P20 swimming pool heat pump is a 30ft x 15ft that is 4ft deep swimming pool, although this is just a basic guide.

    For help and advice call 01322 554 870


    Hydropro P23T 3 Phase Heat Pump Data

     

    Power Input

    2.87 kW

    Heating Capacity (A27/W27)

    23.1 kW

    Heating Capacity (A15/W26)

    16.2 kW

    Maximum Volume of Pool

    With Good Insulation

    80m3 / 80,000 litres

    Power Supply Type C or D breaker

    20 AMPS

    Coefficient (C.O.P.)  at A27/W27

    6.42

    Coefficient (C.O.P.)  at A15/W25

    5.06

    Compressor

    Rotary

    Refrigerant

    R32

    Fan Quantity

    2

    Fan Direction

    Horizontal

    Noise Level (10 metres)

    57 dB (A)

    Water Connection

    50mm

    Minimum Water Flow

    7.5 m3/h

    Dimensions (L/W/H)

    105cm / 43cm / 125cm

     

    • 25kw Electro Heat Plus 85 Heat Pump - Indoor Installation Possible
    • Waterco Europe Manufactured
    • Heats Swimming Pools From May To September
    • Shipped Same Day
    • Can Be Installed Indoors Using Optional Venting Kit

    DELIVERY: Waterco Electro Heat Plus 25kw Swimming Pool Heat Pumps are delivered by a specialist haulier and take 1-3 days to arrive. 

    RETURNS: Electro Heat Plus 25kw swimming pool heat pumps can be returned unused and in the original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the 25kw Waterco Electro Heat Plus Heat Pump, our returns department confirm that everything is present and in its original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    25kw Electro Heat Plus Swimming Pool Heat Pumps are designed & manufactured by Waterco Europe for the Climate and temperatures achieved in Northern Europe.

    The massive benefit of the 25kw Waterco Electro Heat Plus Swimming Pool Heat Pump compared to other heat pumps is that it is possible to install them indoors using the optional venting kit. Quite often it is not desirable or possible to install the heat pump outdoors and in this situation then the Electro Heat Plus Swimming Pool Heat Pump is ideal.

    Electro Heat Plus Heat Pumps are supplied with Smart Controls giving you simple temperature management and also the ability to self-diagnose the functionality of the heat pump. Also, they have many in-built safety devices checking water flow, refrigerant level and the start-up delay that is added to the compressor. 

    The Powerful Titanium Dual Coil Heat Exchanger maximises water contact and this, along with the very large evaporator, increases heat output in your 16kw Waterco Electro Heat Plus Heat Pump which is highly resistant to the corrosive effects of ozone, iodine, Baquacil, salt and chlorinated water.

    Every 85BTU 25kw Electro Heat Plus Heat Pump has a smart grey weatherproof cabinet, R410A Refrigerant Gas and 2 + 3 Years Residential Warranty

     

    Electro Heat Plus Swimming Pool Heat Pumps

    Electro Heat Plus 85 BTU 25kw Swimming Pool Heat Pump 

    The sizing chart below assumes the following UK conditions: Pool Depth Is 1.5m, Inground Pool, Heat Pump Running Time 10 Hours Per Day, No Water Table, Solar Cover Used 20 Hours Per Day And The Pool Is In A Sheltered Position

     

    Electro Heat Plus Heat Pump  Power Input Running Amps Dimensions mm Type C    Breaker Size Weight

    Heat Plus 85 BTU

    25 KW

    5.0 kW/hr 20

    W 780

    H  870

    D  890

    32 Amps 91kg

     

    waterco electro heat plus heat pump points

    Nano Action Reversible 3kw Heat Pump For Above Ground Pools

    by World of Pools.com
    Sold out
    £590.00
    • Poolex Nano Action Reversible Heat Pump -
    • Works Down To 5°C Air Temp 
    • In Stock for Next Working Day Delivery
    • Plug & Play 3kw Heat Pump For Intex & Above Ground Pools
    • Heats A 14m3 Pool To 30°C - Works Down To 5°C Air Temperature
    • Only 8p Per Hour To Run
    • 2 Year Parts Warranty

    DELIVERY: Poolex Nano Action Reversible Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

    RETURNS: Nano Action Reversible Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Poolex Nano Action Reversible Heat Pump For Above Ground Pools is  especially suited to heat small above ground pools up to 14m3 to 30°C

    You will need a length of hose to connect to Intex or Bestway 1.25" Flexible Pool Hose

    You Can Order This At The Same Time As The Nano Heat Pump

    Unlike other small Plug & Play Heat Pumps the Nano Action Reversible Heat Pump is made to the same specification as much larger heat pumps. Weighing Only 18kg it is easy to move and is designed to last for years.

    With a start-up rate of less than 1kw and a running current of 630w the Nano Action Reversible Heat Pump will only cost around 8p per hour to run. Less than £1 per day. When compared to a normal electric heater which can cost around £5 per day, You could save enough money in the first year to pay back the initial outlay.

    Minimum Flow rate required on Nano Action Reversible Heat Pump is 2m3/hr

    No ByPass Required

    A Good Quality Solar Cover Must be Used With This Heat Pump to help during the day and to preserve as much heat as possible at night. 

    Below are suggestions for above ground Intex or Bestway pool sizes that the Nano Above Ground Pool Heat Pump is suitable for

    Metal Frame Pools

    10ft x 30 inch Metal Frame Pool
    12ft x 30 inch Metal Frame Pool
    12ft x 36 inch Metal Frame Pool
    12ft x 48 inch Metal Frame Pool

     

    Easy Set Pools

    8ft x 30 inch Easy Set Pool
    10ft x 30 inch Easy Set Pool
    12ft x 30 inch easy Set Pool
    12ft x 36 inch Easy Set Pool
    15ft x 30 inch Easy Set Pool
    15ft x 48 inch Easy Set Pool

     

    Sun Spring Plug & Play Above Ground Pool Heat Pump
    • Sunspring 5kw to 12kw Swimming Pool Heat Pump
    • Swimming Pool Heat Pump That Plugs Into A 13 amp Socket
    • Extend Season May to September Works Down To 8° C
    • Great For Intex, Bestway & Other Above Ground Pools
    • 15 Minute Installation With No By-Pass Required

    DELIVERY: Sun Spring Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Sun Spring Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    The Sunspring Plug & Play Swimming Pool Heat Pumps are made especially above ground pools. These heat pumps, up to the 9kw, do not have to be hard-wired in, saving up to £500 on installation costs. As the 5, 8 & 12 Sun Spring Plug & Play Swimming Pool Heat Pump will plug into a 13 amp socket and does not require a by-pass, installation can be carried out in as little as 15 minutes by anyone. 

    We have other ranges of Plug & Play Swimming Pool Heat Pumps available, which are less expensive than the Sunspring Heat Pump, but just as well made and all with 2 Year Warranties.

    Poolstyle Mini 6 & 8 Plug & Play Above Ground Pool Heat Pump - Click Here

    Flotide A10 9.6kw Plug & Play Swimming Pool Heat Pump - Click Here

    To get the best from your Sunspring Heat Pump it is advisable to size the heat pump to the middle of its capabilities. To assist you in choosing the most suited Sunspring Heat Pump for your pool we have provided a guide of MAXIMUM POOL SIZES. If the volume of water in your pool is equal to or larger than the maximum volume it is always advisable to go for the next larger heat pump, as it will be easier to maintain your pool water temperature and potentially provide extended use outside the main 3 summer months.

    Sunspring Heat Pumps Will Be Despatched Same Day If Ordered By 11 AM

    For advice and help on choosing the Sunspring Heat Pump suitable for your pool please call us on 01322554870

    Maximum Pool Size

    Sunspring 5 Above Ground Pool Heat Pump  pools up to 12m3 - 15ft x 36" Metal Frame Pool

    Sunspring 8 Above Ground Pool Heat Pump  pools up to 20m3 - 15ft x 48" Metal Frame Pool

    Sunspring 12 Above Ground Pool Heat Pump  pools up to 30m3 - 18ft x 48" Metal Frame Pool

    Minimum Flow rate required  

    3m3/hr on Sunspring 5

    4m3/hr on Sunspring 8

    5m3/hr on Sunspring 12

    Sunspring Heat Pumps come with graduated hose-tails to connect to 1.25" & 1.5" flexible hose. Also included are Glue Sockets for 50mm or 1.5" rigid pipe. In addition, no bypass kit is necessary.

    The Sun Spring Heatpumps have a 2 Year Collect & Repair Or Replace Warranty. 

    If you require help in sizing your heat pump or have any questions, please call us on 01322 55 4870

     

    Hot Splash Above Ground Pool Heat Pump - 3.35kw

    by World of Pools.com
    Sold out
    £440.00
    • Hot Splash Above Ground Pool Heat Pump 3.35kw
    • Plug Into A 13 amp Socket
    • Heats Above Ground Pools Up To 10m3 to 30°C
    • Summer Season Late May to August / Early September
    • 1 Year Parts Warranty

    DELIVERY: Hot Splash Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Hot Splash Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    The Hot Splash Heat Pump is designed for Above Ground Pools and is one of the smallest above ground pool heat pumps available. Built to heat Intex, Bestway, Summer Escapes and other Summer Use above ground pools with a size of up to 10m3 plugging directly into a 13amp socket

    The Hot Splash Heat Pump is very cheap to run when compared to a comparable plug & play electric heater. For example, a 2.2kw Intex Electric Heater requires 2.2kw of power to run at around 42p per hour to run, whilst only giving you 2.2kw of heat. Compare this with the Hot Splash Heat Pump which only requires 0.56kw of electricity in to produce 3.35kw of power out. That is only 10p an hour to get the equivalent of 63p of heat.

    Using the Hot Splash Heat Pump could give you a saving of £2.50 per day compared to an Intex heater, making a saving of over £250 in one Summer.

    This saving will pay back the extra cost of the Hot Splash Heat Pump in one year. The following year all you have is a £250 saving and a warm pool.

    As with all swimming pool heaters, a Solar Cover is essential and the better the quality the more money you save.

    The Hot Splash Heat Pump has a Minimum Flow rate requirement of 2m3/hr 

    Digital Heating Control Panel - Control Heating Up To 30°C & No ByPass Required

    All Swimming Pool Heat Pumps are designed to heat Pool water slowly but very cost-effectively. If you correctly size a Hot Splash heat pump to heat your pool from cold to warm it will normally take 2 - 3 days, but following this initial heating period, it is just a matter of using the Hot Splash Heat Pump to keep up the heat every day.

    A Good Quality Solar Cover Must be Used With This Heat Pump

    A 400 Micron Blue Solar Cover is recommended to be used with this pool heater to preserve as much heat as possible at night. Click Here to go to the 400-micron Blue solar cover page

     

    hot splash above ground pool heat pump world of pools

     

     

    We would recommend the Hot Splash Above Ground Pool Heat Pump for pools up to 10m3. If your pool is larger than this we would recommend a bigger heat pump.

    The images below are our suggestions for above ground pool sizes to help you decide if the Hot Splash Heat Pump is suitable for your pool.

    If you would like advice on choosing a heat pump please call on 01322 554 870

    hot splash above ground pool heat pump metal frame pool sizing

    10ft x 30 inch Metal Frame Pool
    12ft x 30 inch Metal Frame Pool

     

    Intex Easy Set Heat Pump Sizing Hot Splash Heat Pump

    8ft x 30 inch Easy Set Pool
    10ft x 30 inch Easy Set Pool
    12ft x 30 inch easy Set Pool
    12ft x 36 inch Easy Set Pool

     

    Nano Action 2.8kw Heat Pump For Above Ground Pools

    by World of Pools.com
    Sold out
    £540.00
    • Nano Heat Pump Works At 10°C Air Temp
    • in stock for fast delivery
    • Plug & Play 3kw Heat Pump For Intex & Above Ground Pools
    • Heats A 12m3 Pool To 30°C - Works Down To 10°C Air Temperature
    • Only 8p Per Hour To Run
    • 2 Year Parts Warranty

    DELIVERY: Poolex Nano Plug & Play Above Ground Pool Heat Pumps & Hot Tub Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Poolex Nano Plug & Play Above Ground Pool Heat Pumps & Hot Tub Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

    PRODUCT INFO:

    Poolex Nano Plug & Play Heat Pumps are ideal for above ground pools up to 12m3, such as an Intex or Bestway 12ft x 48" Metal Frame Pool.

    It is suitable for heating a pool of 12m3 during the main Summer months. A Solar Cover has to be used whenever the pool is not in use, especially at night as this will speed up pool heating time and reduce heat loss at night by up to 5°C. Buy Now For Same Day Despatch.

    The Nano Plug & Play Heat Pump requires 0.7kw of power to produce nearly 3kw of power out. That is roughly 8p an hour to get the equivalent of 40p of heat from the Poolex Nano Heat Pump into your pool making it so much cheaper to run than an electric pool heater.  You could even recoup the outlay in the first year in savings on your electricity bill.

    The minimum flow rate from your pool pump is 2m3/hr to start the Nano Plug & Play Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

    Digital Heating Control Panel - Control Heating Up To 30°C

    No ByPass Required if using small Intex pumps

    The Poolex Nano Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

    A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible, especially at night.

    The Nano Plug & Play Above Ground Pool Heat Pump is suitable for pools up to 12m3 

    Below are suggestions for above ground pool sizes that the Nano Plug & Play Above Ground Pool Heat Pump is suitable for

     

    Bestway & Intex Metal Frame Pool Heat Pump
    10ft x 30 inch Metal Frame Pool
    12ft x 36 inch Metal Frame Pool
    12ft x 48 inch Metal Frame Pool

     

    Intex & Bestway Easy Set Pool Heat Pump
    8ft x 30 inch Easy Set Pool
    10ft x 30 inch Easy Set Pool
    12ft x 30 inch easy Set Pool
    12ft x 36 inch Easy Set Pool
    15ft x 36 inch Easy Set Pool
    15ft x 48 inch Easy Set Pool

     

    • Calorex Pro Pac Y Range Heat Pump - All Year Round Heating
    • UK Designed Swimming Pool Heat Pump
    • Complies With Permitted Development Requirements
    • Warranty - 3 Year Parts & Labour 
    • 12 Month Use On Indoor Pools up to 15ft x 30ft x 1.3m Deep
    • Sizing For March - November or All Year Round

    DELIVERY: Calorex Pro Pac Y Range Swimming Pool Heat Pumps are delivered by a specialist haulier and take 1-3 days to arrive. 

    RETURNS: Calorex Pro Pac Y Range swimming pool heat pumps can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the Calorex Y Range Heat Pump, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Calorex Pro Pac Y Range Swimming Pool Heat Pumps are designed by Calorex in the UK for UK Swimming Pools. Suitable for pools up to 60m3 for the March to November swimming season or for a maximum of 40m3 if it is for an All Year Round swimming season, the Calorex Pro Pac Y Range has four sizes to suit all pools up the stated sizes.

    To suit All Year Round swimming pool heating in the UK the Calorex Pro Pac Y Range has built-in energy management controls that allow your swimming pool filtration to be run on a time clock but, if needed, the Calorex Pro Pac Y Range heat pump will override the time clock and start heating the pool outside of the timer settings. 

    Calorex Pro Pac Y Range Heat Pumps come with a comprehensive 3 Years Parts & Labour Warranty (UK Only)

    If you would like help sizing a Calorex Pro Pac Y Range Heat Pump for your swimming pool please call us on 01322 554 870

    Calorex Pro Pac Y Range Swimming Pool Heat Pumps For Swimming Pool Heating from March to November or All Year Round, dependant on pool size.

    The graphs below assume the following UK conditions: Pool Depth Is 1.3m, Inground Pool, Ground Water Below Pool Floor, Solar Cover Used 20 Hours Per Day And The Pool Is In A Sheltered Position

     

     Domestic Pool Sizing Graphs For Calorex Pro Pac Y Range Heat Pumps

    AVERAGE POOL DEPTH IS ASSUMED 1.3M

     calorex pro pac y range heat pump sizing chart

    CLICK ON IMAGE TO OPEN PDF