Products

  • Certikin iSAVER Swimming Pool Pump Inverter 2.2kW (For Pumps Up To 1hp )
  • Cost Effective Return On Investment
  • Reduce Running Costs Up To 65%
  • Simple installation on new or retro pumps up to 1hp
  • Suitable For Single Phase Pumps Only
  • Improves filtration &Easy to install
  • Also Available As 1.1kw To Suit Pumps Up To 1hp

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The iSAVER Inverter is a low cost solution designed to greatly reduce the running costs of pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary. iSAVER Inverter technology enables you to control both pump flow-rates and pump run times.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your pool pump by as much as 60% simply by linking your existing pool circulation pump to an inverter.

How does it work?

The 2.2kw iSaver Pool Pump Inverter works by allowing your single speed pool pump (2hp) to run at lower flow rates, increasing efficiency and reducing energy consumption by up to 60%.

Single speed pool pumps tend to run at higher capacities than required and therefore are inefficient and expensive to run, without adding an inverter.

as an example, reducing a motor speed of 2850rpm to 1950rpm can result in reducing power input from 983 watts to 295 which is over 60% less.

In stock for fast delivery

 

  • Certikin Criss Cross Deluxe Winter Debris Cover
  • Manufactured In UK By Certikin
  • Keeps Pool Clean In Winter
  • Straps Run Right Across Cover For Extra Strength
  • Colour Options Tan, Blue, Grey, Green
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene with Reinforced Corners

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Maple Criss Cross Winter Debris Covers are manufactured by Certikin. There is 4 options on the colour of debris cover, Tan, Blue, Grey and Green. Please advise us which colour you would like at time of order. The Criss Cross covers are made for additional strength. The Certikin Criss Cross Debris Covers have Reinforced Corners and come with stainless steel fixings.

The cover options we give are for pool size. The covers will be made 300mm more around thje full perimeter of the pool. We list the most popular sizes but can make any size debris cover. Please call us to discuss bespoke debris cover requests.

The Certikin Maple Deluxe Criss Cross Winter Debris Cover will also help reduce frost damage to the swimming pool and will dramatically reduce any staining from leaves and other winter debris would normally enter into the pool not only saving you money in repairs and stain removal in the Spring but will potentially prolong the life of your liner.

 

When ordering the Certikin Criss Cross Winter Debris Cover add your colour choice in the comments section on the order page. 

The Choices Are Tan, Blue, Grey or Green. Colour Chart Below

certikin criss cross winter debris colours

If you require any help or have any questions please call us on 01322 554 870. We will be happy to help.

Certikin Maple Winter Debris Cover For Swimming Pools
  • Certikin Maple Swimming Pool Winter Debris Cover
  • High Quality Cover Manufactured In The UK
  • Keeps Pool water Clean Through The Winter
  • Available in Green, Tan, Blue, Grey
  • Helps Reduces frost damage
  • Reduces discolouration of liner caused by leaves and other debris
  • Woven Polyethylene with reinforced corners

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Maple Debris Cover is a high quality Winter Debris Covers manufactured to the highest standards. The cover has reinforced corners and comes with stainless stell fixings.

The Certikin Winter Debris Cover is available in four colours, Grey, Green, Tan and Blue. We have quoted standard sizes but can have this cover made to fit all size swimming pools.

A 300mm overlap is added to the cover and below sizes are pool size not cover size so the cover will come a full 300mm around the full perimeter of the swimming pool.

The Certikin Maple Debris Covers are are engineered to withstand horrendous winters and keep your swimming pool from leaves and debris over the winter months.

Maple Winter Debris Covers are made in the UK from Woven Polyethelene 

When ordering the Certikin Criss Cross Winter Debris Cover add your colour choice in the comments section on the order page. 

The Choices Are Grey, Blue, Green or Tan. Colour Chart Below

certikin criss cross winter debris colours

If you require any help or have any questions please call us on 01322 554 870. We will be happy to help.

Certikin Mini Pump .25hp

Certikin Mini Pump .25hp

by Certikin
£349.00
  • Self Priming Pool Pump
  • Designed For Small To Medium Pools
  • Reduced Footprint Same Massive Power
  • 2 Year Warranty
  • Suitable For All Pools Inc Salt Chlorinated Pools
  • Replacement For HKV Pump

 

DELIVERY: Certikin Mini Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.


When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Certikin Mini Pump has been manufactured to be the perfect pump choice for small to medium sized pools. This is a replacement to the Certikin HKV Pump. Whether the pool is Above Ground or Inground, Chlorine or Salt Water the Certikin Mini Pump will be the ideal replacement for any previous pump.

Power has not been lost by reducing the footprint of the pump, with the 0.25HP Pump supplying 9 m3/h ideal if you have a heat pump as your heating source.

The technology of Certikin's other pumps has been used, with a Noryl impellor to reduce noise and the stainless steel shaft to improve the durability.

If you are looking for a high spec pump for not a lot of money then the Certikin Mini Pump, which is the direct replacement for the HKV Pump, should be your first choice.

As with all Certikin products they have a warranty cover you would expect, 2 Years.

Call us on 01322 554 870 if you would like to discuss which pump is suitable for your pool.

 

Certikin Mini Pump .33hp

Certikin Mini Pump .33hp

by Certikin
£354.00
  • Self Priming Pool Pump
  • Designed For Small To Medium Pools
  • Reduced Footprint Same Massive Power
  • 2 Year Warranty
  • Suitable For All Pools Inc Salt Chlorinated Pools
  • Replacement For HKV Pump

 

DELIVERY: Certikin Mini Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Certikin Mini Pump has been manufactured to be the perfect pump choice for small to medium sized pools. This is a replacement to the Certikin HKV Pump. Whether the pool is Above Ground or Inground, Chlorine or Salt Water the Certikin Mini Pump will be the ideal replacement for any previous pump.

Power has not been lost by reducing the footprint of the pump ideal if you have a heat pump as your heating source.

The technology of Certikin's other pumps has been used, with a Noryl impellor to reduce noise and the stainless steel shaft to improve the durability.

If you are looking for a high spec pump for not a lot of money then the Certikin Mini Pump, which is the direct replacement for the HKV Pump, should be your first choice.

As with all Certikin products they have a warranty cover you would expect, 2 Years.

Call us on 01322 554 870 if you would like to discuss which pump is suitable for your pool.

 

Certikin Mini Pump .50hp

Certikin Mini Pump .50hp

by Certikin
£375.00
  • Self Priming Pool Pump
  • Designed For Small To Medium Pools
  • Reduced Footprint Same Massive Power
  • 2 Year Warranty
  • Suitable For All Pools Inc Salt Chlorinated Pools
  • Replacement For HKV Pump

 

DELIVERY: Certikin Mini Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Certikin Mini Pump has been manufactured to be the perfect pump choice for small to medium sized pools. This is a replacement to the Certikin HKV Pump. Whether the pool is Above Ground or Inground, Chlorine or Salt Water the Certikin Mini Pump will be the ideal replacement for any previous pump.

Power has not been lost by reducing the footprint of the pump, ideal if you have a heat pump as your heating source.

The technology of Certikin's other pumps has been used, with a Noryl impellor to reduce noise and the stainless steel shaft to improve the durability.

If you are looking for a high spec pump for not a lot of money then the Certikin Mini Pump, which is the direct replacement for the HKV Pump, should be your first choice.

As with all Certikin products they have a warranty cover you would expect, 2 Years.

Call us on 01322 554 870 if you would like to discuss which pump is suitable for your pool.

 

Certikin Mini Pump .75hp Swimming Pool Pump
  • Self Priming Pool Pump
  • Designed For Small To Medium Pools
  • Reduced Footprint Same Massive Power
  • 2 Year Warranty
  • Suitable For All Pools Inc Salt Chlorinated Pools
  • Replacement For HKV Pump

 

DELIVERY: Certikin Mini Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Certikin Mini Pump has been manufactured to be the perfect pump choice for small to medium sized pools. This is a replacement to the Certikin HKV Pump. Whether the pool is Above Ground or Inground, Chlorine or Salt Water the Certikin Mini Pump will be the ideal replacement for any previous pump.

Power has not been lost by reducing the footprint of the pump, with the 0.75HP model supplying 13 m3/h, ideal if you have a heat pump as your heating source.

The technology of Certikin's other pumps has been used, with a Noryl impellor to reduce noise and the stainless steel shaft to improve the durability.

If you are looking for a high spec pump for not a lot of money then the Certikin Mini Pump, which is the direct replacement for the HKV Pump, should be your first choice.

As with all Certikin products they have a warranty cover you would expect, 2 Years.

Call us on 01322 554 870 if you would like to discuss which pump is suitable for your pool.

 

Certikin Mini Swimming Pool Pump 0.75hp
Certikin Pool Pump Inverter

Certikin Pool Pump Inverter

by Certikin
£512.00
  • Certikin Clever Pool Pump Inverter
  • Made by Cerkitin
  • Domestic Variable Speed Controller for pumps 1hp to 2hp
  • Reduces pump speed from 2850rpm to a lower level
  • Energy savings uof upto 70%

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Pool Pump Inverter will help you to control your pool pump's speed, reducing rpm when required. This inverter is easy to install and simply connects to your wall mounted pool pump. Its manual control allows you to vary the speed of your pump when you do not need full power and revert to full speed when you need to i.e. when you are backwashing or require higher flow. The inverter should be used with a good quality pump such as a Certikin brand, Sta Rite, Waterco etc.

 A 30%  reduction from 2850rpm to 1995 rpm can result in energy saving of 70%. The money you save through using less energy far out-ways the initial cost of this inverter, meaning that this product is an essential item for pool owners who wish to save money.

Certikin Inverter is designed to be used on pumps 1hp to 2hp

Benefits of using a pump inverter:  

- Energy savings (70%-80%)
- Reduces noise

  • Certikin Quick Change Underwater Light Components & Replacement Internals
  • No Tools Needed to change the bulb
  • Ideal for gunite swimming pools
  • Vertical and horizontal cable exit
  • Optional 316 stainless steel fascia ring

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Quick Change Underwater Light Components & Replacement Internals


 World Of Pools are the one of the UK's largest swimming pool & hot tub suppliers and are dealers in certikin products. We can supply all replacement certikin quick-change underwater light components and replacement internals spares, these are all Certikin branded with many in stock with fast delivery.

Certikin Quick Change Underwater Swimming Pool Light - World of Pools
  • Certikin Quick Change Underwater Halogen Light
  • No Tools Needed to change the bulb
  • Ideal for gunite swimming pools
  • Vertical and horizontal cable exit
  • Optional 316 stainless steel fascia ring
  • Includes transformer and deck box

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Quick Change Underwater Light PU6 - Complete kit includes Light, Transformer and deck box

The Certikin Quick Change underwater light is a versitile light designed for quick installation that requires no screws, nut or bolts tpo hold the light in place. The light kit comes with transformer and deck box and is available for liner or concrete swimming pools. The certikin light is held in stock and available for quick delivery

The Lamp holder of the new Certikin Quick Change light has no screws, nuts or bolts and is held in place with a threaded ring on a new purpose-made gasket. This means no tools are needed to change the bulb, thus reducing the bulb changing time.

The niche is now smaller in diameter and has an opional vertical and horizontal cable exit allowing greater flexibility of installation. The unit has been designed for use with the standard PU8 sealed beambulb and certikins PU11s Transformer.

The niche can be fitted with a puddle flange for concrete swimming pools, has a lower front edge to aid in gunite installations and has an ajustable front cover ring to allow variance in tilling and screeding depths.

The Liner version comes with longer 2" screws to suit different panel and one-piece pool thicknesses.

Finally, an opional 316 stainless steel fascia ring is available to enhance the finish for any swimming pool

On the Certikin Quick Change light system one transformer is required per light

 

 

  • Top selling certikin skimmer for concrete and liner pools
  • Comes with wide angle and parallel throat
  • Extended collar and square frame provides easy installation
  • Through the wall design
  • Liner version comes with adaptor kit

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO: Wide angle certikin skimmer in two types, concrete pools and liner pools which comes with adaptor kit

  • Certikin Swimming Pool Skimmer With Floating Weir
  • Concrete and liner pools
  • Through the wall design
  • max flow is 4.5(m3)
  • Robust one piece body
  • Liner version comes with adaptor kit

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO: First choice for swimming pool skimmer, the certikin skimmers are quality made and come in two options for liner or concrete pools. Liner skimmers come with adaptor kit

 

Certikin Swimflo Plus Pump - HGS Swimming Pool Pump - World of Pools
  • Certikin Swimflo Plus Swimming Pool Pump
  • Previously called Swimflo HGS
  • Ultra Quiet Operation and Suitable For Medium To Large Pools
  • High Hydraulic efficiency, Ultra quiet operation
  • Improved self priming
  • Suitable for salt chlorinated pools

 

DELIVERY: Certkin Swimflo Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Cerkin Swimflo pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Certikin Swimflo Plus HGS swimming pool pump is available from 0.5HP (0.37kW) up to 3HP (2.2kW), in single phase or three phase.

Direct replacement for the HGS Certikin pump with same fittings and size. Fast delivery, normally next working day if ordered before 1pm.

The Swimflo plus is a one-piece moulded body pump designed to last

If you need help choosing which Certikin Swimflo Plus HGS Pump is suitable for your pool call us on 01322 554 870

 

 

Certikin Swimflo Pump - HPS Swimming Pool Pump - World of Pools

Certikin Swimflo Pump

by Certikin
£465.00
  • Certikin Swimflo Pump
  • Previously called Swimflo HPS
  • Improved self priming
  • One-piece body in durable resistant composite material
  • Suitable for salt chlorinated pools
  • 2 Year Warranty

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Swimflo Pump

Certikin Swimflo Pump


The Certikin Swimflo swimming pool circulation pump is available in 0.3HP (0.24kW), 0.5HP (0.37kW), 0.75HP (0.55kW), 1HP (0.74kW) and 1.5HP (1.1kW) sizes.

The high hydraulic efficiency of the Certikin Swimflo has lead to an improved self priming, making this pump a real high performer, without the price tag.

Manufactured in one-piece, durable & chemical resistant composite material you know that this pump will last for many years, unlike a few of its similarly priced competitors.

The pre-filter on the Cerikin Swimflo Pump is very easy to open, with two threaded knobs to tighten the lid, without twisting. Simpe but ingenious.

Both ports are 1.5" sockets.

 

 

  • Certikin Pool Shallow Leaf Net HD67
  • Shallow leaf net that fits to standard telescopic poles

DELIVERY: Shallow Certikin Leaf Nets are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Certikin Shallow Leaf Nets can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Certikin Heavy Duty Shallow Leaf Nets HD67 will last years longer than similarly priced, but inferior products. They will fit all telescopic poles.

Certikin Shallow Leaf Net HD67 is a very good quality net that will outlast the cheaper Chinese imported flat leaf nets that are available. We hold these shallow leaf nets in stock for fast delivery

 


 

 

 

 

  • Certikin White ABS 1.5" Plain Socket
  • Big Discounts For Online Sales
  • In Stock For Immediate Delivery
  • Manufactured to tighter size & pressure specifications than BS5392 Class C 9 bar
  • 1.5" Fittings Fit Inside 2" Fittings
  • Made From Virgin ABS
  • Colour Match All Other Certikin Fittings
  • Each Production Run Is Date Stamped For Traceability

DELIVERY: In-stock items are sent out on a next working day service

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin 1.5" White ABS Plain Socket Connectors are made to much higher standards than other brands. This will give you peace of mind that your swimming pool pipework will stay leak free throughout its working lifespan.

1.5" Certikin Swimming Pool fittings will glue fit snugly inside 2" Certikin fittings and are even manufactured to a tighter size and pressure specification than BS5392 Class C 9 Bar fittings. Each Certikin ABS Plain Socket connector  is produced from virgin ABS with each production run having a date stamp for traceability. All this means not only will Certikin fittings offer improved pipework finish in the swimming pool plant room, but all Certikin white fittings will colour match.

  • Certikin Pool Vacuum Hose
  • 1.5" (38mm) Vacuum Hose - Available in sizes 9m - 18m
  • The Certikin Floating Hose has a unique swivel cuff
  • A very superior product for your swimming pool
  • The wall strength surpasses many in the industry, often Vacuum hose when under suction can collapse
  • Vacuuming the pool Certikin hose has easy identifiable end cuffs for attachment
  • In-stock for fast delivery

 

DELIVERY: Certikin Swimming Pool Vac Hoses are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Certikin Swimming Pool Vac Hose can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Deluxe Certikin Floating Hose is available in 9m, 12m, 15m and 18m. The Hose has a unique swivel cuff, is crush proof and UV stabilised. A very superior product to help you maintain your swimming pool, not to be confused with cheaper, lesser quality hoses you see on the market. Held in stock for fast next day delivery. 

The Deluxe Certikin vacuum hose comes in all size to match any size swimming pool, the Yellow end of a Certikin Vacuum hose has a built-in Swivel and can be attached to the vacuum head and the Blue end is fixed which is to be attached to the Skimmer or Vacuum point when connecting the hose. This unique system will make ease of vacuuming of your swimming pool and make it less of a chore without any tangle or disconnection half way through your suction. 

The Certikin Hose comes in 4 Lengths to suit all size domestic pools. The Deluxe hose is very rigid so easy to put away and store after use and comes complete with 1.5” vacuum cuff at each end so will fit any standard vacuum head.

 

 

  • 6m Certikin Swivel Cuff Pool Vacuum Hose - 1.5 inch Cuffed Both Ends
  • Will Fit All 1.5 Inch Sockets
  • One Fixed Cuff and one Swivel Cuff for greater flexibility
  • Top Quality Boxed Vacuum Hose
  • In Stock For Immediate Delivery

DELIVERY: We aim to Certikin Vacuum Hose out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Swimming Pool Vacuum Hose for essential pool maintenance. This quality vac hose in 6m. To be used with pool cleaning products such as vacuum heads. The Certikin Vacuum hose has one swivel cuff and one fixed cuff for greater flexibility 

When using vacuum hose you must ensure there is no air left in the hose before attaching it to either your vac point or via your skimmer basket. If using your skimmer as point of entry you can also use a Kornea vac plate.

      • Suitable for replacing PU6 300w using existing Niche
      • Produces the full spectrum of rich colours or white (multi-colours)
      • Simple on/off switching sets colour changing or fixed mode (can be achieved by using a standard switch)
      • Sylvania remote control and receiver included in kit
      • To be used in existing PU6 Quick change niche system
      • Identical shape to incandescent PAR 56 = easy retrofit
      • Lamp life >25,000 hours
      • Low heat generation just 60W power requirement per lamp

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

LED Lights for refurbishing Existing PU6 Niche

Swap to LED, same money on electric costs, have a brigher light and amazing options to change the colour of the lights. The Sylvania LED underwater swimming pool lights are a professional light system for underwater illumination of your swimming pool. The Sylvania Colour change lights combine high power LED's of red, green, blue and fixed white colours together with an internal microprocessor, it is capable of generating the full spectrum of colours. The lamp can be operated in a mode of continuous colour changing or fixed at any desired colour by briefly switching the lamp off and back on again. This is facilitated by the optional Sylvania remote control and receiver.

We have listed 3 options for Concrete and Liner Swimming Pools

1 light kit for pools approx 25 cm3, includes: 1 x PU6 Sylvania Light (no Niche) 1 x Deck Box, 1 x Transformer, 1 x Remote Control, 1 x Receiver

2 light kit for pools approx 50 cm3, includes: 2 x PU6 Sylvania Lights (no  Niche), 2 x Deck Box, 1 x Transformer, 1 x Remote Control, 1 x Receiver

3 light kit for pools approx 75 cm3, includes: 3 x PU6 Sylvania Lights (no Niche), 3 x Deck Box, 1 x Transformer, 1 x Remote Control, 1 x Receiver

 

 

 

      • Suitable for replacing PU9 300w using existing Niche
      • Produces the full spectrum of rich colours or white (multi-colours)
      • Simple on/off switching sets colour changing or fixed mode (can be achieved by using a standard switch)
      • Sylvania remote control and receiver included in kit
      • To be used in existing PU9 Niche system
      • Identical shape to incandescent PAR 56 = easy retrofit
      • Lamp life >25,000 hours
      • Low heat generation just 60W power requirement per lamp

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

LED Lights for refurbishing Existing Certikin PU9 Niche

Swap to LED, same money on electric costs, have a brigher light and amazing options to change the colour of the lights. The Sylvania LED underwater swimming pool lights are a professional light system for underwater illumination of your swimming pool. The Sylvania Colour change lights combine high power LED's of red, green, blue and fixed white colours together with an internal microprocessor, it is capable of generating the full spectrum of colours. The lamp can be operated in a mode of continuous colour changing or fixed at any desired colour by briefly switching the lamp off and back on again. This is facilitated by the optional Sylvania remote control and receiver.

We have listed 3 options for Concrete and Liner Swimming Pools

1 light kit for pools approx 25 cm3, includes: 1 x PU9 Sylvania Light (no Niche) 1 x Deck Box, 1 x Transformer, 1 x Remote Control, 1 x Receiver

2 light kit for pools approx 50 cm3, includes: 2 x PU9 Sylvania Lights (no  Niche), 2 x Deck Box, 1 x Transformer, 1 x Remote Control, 1 x Receiver

3 light kit for pools approx 75 cm3, includes: 3 x PU9 Sylvania Lights (no Niche), 3 x Deck Box, 1 x Transformer, 1 x Remote Control, 1 x Receiver

 

 

 

Sold out

Certikin Telescopic Pole

by World Of Pools.com
Sold out
£78.95
  • Certikin Telescopic Pole
  • 6' to 12' or 1.8m to 3.6m
  • In-stock for fast delivery
  • We dispatch these poles in white pipe for added safe delivery

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Telescopic Pole extends from 1.8m to 3.6m. Stronger and longer lasting than most other poles on the market, this Certikin Telescopic Pole fits onto your vac head, net or brush for essential swimming pool maintenance.

The Certikin Telescopic Pole is more expensive than other poles available but the strength and quality especially on the locking system to create the ideal length provides value for money. We send the Certikin Telescopic Poles out for delivery in a 1 1/2m white pipe for safe delivery

 

  • Certikin Top Mount Filter with OC-1 Filter Media
  • Certikin Top Mount Filter
  • Multi Port Valve and Pressure Gauge
  • OC-1 has 20 X the capacity of debris capture compared to sand or glass
  • Lightweight and very effective
  • Encourages energy savings of up to 80%

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Top Mount Filter complete with OC-1 filter media. OC-1 is an innovative alternative to sand or glass media. OC-1 media captures 20 times more dirt and debris than traditional filter media such as glass or sand. It is also lightweight, meaning it is easy to use.

Certikin Top Mount Filter is a quality filter recommended as the best filter to use with OC-1 media. The filter comes complete with multiport valve and pressure gauge. The Certikin Top Mount Filter comes in four sizes. 20" to 36". Flow rate on the filter's is a s follows

Certikin Top Mount Filter 20" 9m3/h

Certikin Top Mount Filter 24" 14m3/h

Certikin Top Mount Filter 30" 21m3/h

Certikin Top Mount Filter 36" 32m3/h

 

OC-1 completely changes the way you should filter your pool. It allows you to filter with a constant flow, regardless of how much debris is collected and significantly reduce the running costs whilst still filtering to the equivalent standard, just by using a smaller pump or a variable speed pump or controller.

As OC-1 filter media is light weight and efficient, it is essential that you run your pool pump at a lower rpm using a swimming pool pump inverter or by using a small pool pump. Running your pump at a lower rpm will not make your filter less effective as the OC-1 media is designed to capture more debris and dirt compared to sand or glass media, meaning you get more effective filtration running on a lower pump speed than you would with a traditional filter pump set up & speed. This means you achieve better filtration at a lower rpm which results in energy saving costs.

Reduces pool running costs

As recommended by Certikin we only sell OC-1 with a Certikin Side Mount or Top Mount Filter. OC-1 can reduce energy usage and water consumption. Its open cell formation makes it possible to achieve a greater flow of water through the filter. In many cases this means that pump speeds can be reduced by around 20%, without compromising the original flow, producing impressive energy savings. Alternatively, on new installations a smaller pump can be specified to produce the same flow – saving running costs and initial outlay. Due to its constant flow rate and huge debris capacity, OC-1 can reduce backwashing frequency and water consumption.

 

Benefits of using OC-1 filter media:  

- More capacity for debris means better filtration 

- Lightweight media

- Easy to maintain

- Reduced need to backwash & makes for a more efficient backwash

- For use with lower pump RPM meaning less noise & less energy needed

- Less energy = saves you money

- Recyclable at the end of product life

- Suitable for all pool installations

 

 

Certikin White LED Swimming Pool Lights PU6 no Niche - World of Pools
      • Certikin White LED Light is suitable for replacing PU6 300w using existing Niche
      • Produces bright white LED light more powerful than standard 300w light
      • To be used in existing PU6 Quick change niche system
      • Identical shape to incandescent PAR 56 = easy retrofit
      • Lamp life >25,000 hours
      • Low heat generation just 25W power requirement per lamp

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin White LED Lights to replace 300w Lights with Existing PU6 Niche

Swap to LED, same money on electric costs, have a brigher light. The Certikin LED underwater swimming pool lights are a professional light system for underwater illumination of your swimming pool.

Switching to LED if you have an existing PU6 300w light will provide a far brighter light at a fraction of the running cost

You can have upto 4 PU6 White LED lights on one Certikin PU11H Transformer

Option for Deck Box LED Light Lid - available in White and Blue, Convert existing deck box lid easily to this attractive LED ground light. Low loading 2.5w so will not affect transformer

1 light is suitable for pools approx 25 cm3, includes: 1 x PU6 White Light Guts 2.8m Cable (no Niche)

2 lights are suitable for pools approx 50 cm3, includes: 2 x PU6 White Light Guts 2.8m Cable (no  Niche)

3 lights are suitable for pools approx 75 cm3, includes: 3 x PU6 White Lights Guts 2.8m Cable (no Niche)

 

 

 

Chlorine & pH Test Kit For Swimming Pools

by Plastica
Sold out
£26.00
  • Chlorine and pH Swimming Pool Test Kit
  • Comes with 40 tablets

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Chlorine & pH test kit for Swimming Pools. Ensure your pool water is balance correctly for safe bathing.

Class C White Pipe 1.5m x 2 (3m in total)

by Plastica
Sold out
£32.00
  • Class C White Pipe 1.5m x 2 (3m in total)
  • 3m in total of high grade swimming pool pipe
  • In Stock For Immediate Delivery
  • Made From Virgin ABS

DELIVERY: In-stock items are sent out on a next working day service

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Class C White Pipe 1.5m x 2 (3m in total)

Plastica White ABS Swimming Pool Pipe is made to much higher standards than other brands. This will give you peace of mind that your swimming pool pipework will stay leak free throughout its working lifespan.

Clearwater In-Line Chlorine Feeder For Swimming Pools

by World Of Pools.com
Sold out
£195.00
  • Swimming Pool Inline Chlorine Feeder
  • 2" socket x 2.5" spigot (1.5" socket reducers included)
  • Check valve to prevent backflow of water into chlorinator
  • Internal chamber designed for improved flow
  • Can treat pools between 20m³ and 180m³

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Clearwater Swimming Pool chemical feeder for most style swimming pools. More effectice way to add chemicals to your pool water. easy install and quicker to use than traditional method. Suitable for chlorine or bromine pools.

A plastic Non-Return Valve must be installed immediately before any chlorine dispensing unit

 

 

 

 

Combination 30 Thou Swimming Pool Liner

by Plastica
Sold out
£0.00
  • Combination 20 Thou (0.5mm) Swimming Pool Liner
  • Combination Liner Has A Tileband, Plain Walls & Patterned Floor
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Individual Job Number On Liner For Easy Re-Ordering
  • Liner Tileband Choices In Images To The Left

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Combination 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Combination 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

 

  • Comfort Incline Step Adjustable Ladder - 48"-52" Wall Heights
  • Resin Above Ground Pool Ladder
  • For 48"-52" deep above ground pool
  • Suitable for Vogue or Doughboy Replacement Ladder

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Comfort Incline Step Adjustable Above Ground Pool Ladder 48"-52" 

  • Resin Above Ground Pool Ladder
  • For 48"-52" deep above ground pool
  • Suitable for Vogue or Doughboy Replacement Ladder

 

 

Commando Socket for DuraSpa S380 Hot Tubs

by World of Pools.com
£115.00
Commando Socket for Duraspa S380 5-6 Person Hot Tub

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is Made To Order and can not be returned as part of the Standard Returns Policy. .

PRODUCT INFO:

The Commando socket is ideal for the Duraspa S380 as it is designed to meet all relevant European and British Standards, whilst offering remarkable impact strength and an excellent choice of ingress protection ratings. Outstanding temperature performance and good resistance to chemicals make it ideal for Hot Tub installations

Cover Pump for Swimming Pool Safety Covers

by World of Pools.com
Sold out
£420.00
  • Safety Cover - Cover Pump
  • Removes surface water from safety covers or similar covers
  • Ballast tank to add weight for maximum water removal efficiency 
  • Low Voltage
  • Removable pre filter

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The Plastica Safety Cover Pump is ideal for outside pools with safety covers, the pump has a automatic water sensor probe that will automatically turn on when there is unwanted water laying on your safety cover and turn back off again once it has removed the water.

The Plastica Cover Pump is used on Swimming Pool Safety Covers, the pump detects rain through its electronic sensors and then pumps the water away preventing any build up of water. The cover pump will automatically turns off once all the water has been taken from the cover. The Plastica cover pump will prevent dangerous build-up of water that could potentially lead to damaging the cover as well as posing a safety risk.

  • Automatic start and stop
  • Low voltage
  • Ballast tank filled required weight using water
  • Simple water sensor probe
  • Removable pre-filter

  • Cover Saver Syphon Removes Rain Water From Debris Covers
  • For Use With Above Ground Pools
  • Stops The Risk Of Ice Damage To Your Liner
  • Requires No Fixings Or Electrics
  • Protects Debris Covers All Winter

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The Swimming Pool Cover Saver is an easy water removal system when used with winter pool covers. The winter cover saver enables you to take away the strain of rain water pulling down on your above ground pool cover.

The Winter Cover Saver is an easy water removal system, Simply place the drain on top of your swimming pool cover and squeeze the siphon pump until water begins to flow! No electricity is needed! Works on above ground debris covers only and increases the life span of your debris cover by double the amount!

If you require advise on this product please do not hesitate to email or call us

 


 

 

 

 

Covermate 1 Cover Lifter

by World Of Pools.com
£225.00
  • Covermate 1 Hot Tub Cover Lifter
  • Covermate spa cover lifter for Hot Tubs in limited space 
  • Easy to Fit - needs 12" of clearance
  • Easy To Use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The Covermate 1 is one of the most popular cover lifters on the Hot Tub and Spa market today. Covermate spa cover lifters make removing and placing your cover a less time consuming, easier and simple way.

Covermate 1 is one of the most effective cover lifters on the Hot Tub/Spa market today. The effectiveness of this simple design creates ease for people of all ages and sizes. Cover Lifters are a smart way of extending your covers lifespan due to its design that stops the cover ever hitting the ground. The cover will just sit next to your Hot Tub or Spa ready for simply placing back on once out of use.

The Covermate 1 brackets are held on via screws which are placed into the top sides of your Hot Tub/Spa a 2 man assembly is advised but not essential. Before screwing into your Hot Tub a trail run would be advised so you install either side the same for the most effective performance.

Only 12" clearance behind the spa is required. Fits Hot Tubs up to 8 feet width

 

Sold out

Covermate 3 Spa Cover Lifter

by World Of Pools.com
Sold out
£265.00
  • Covermate 111 (3) Hot Tub Cover Lifter
  • Designed with a hydraulic lifting system
  • Works On The Smallest Of Space Required 4" to 6"
  • Easy To Install
  • Easy To Use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Covermate 111 is the leading manufactured Cover Lifter available in the UK today. Designed to suit all the appropriate needs that others brands do not offer you. When selecting a cover lifter clearance next to your tub is needed, with the Covermate 111 it only requires 6 inches (the smallest clearance you will find). Our exclusive wind lock system is the only one of its kind, designed to eliminate broken shock syndrome that other hydraulic Cover Lifters experience. Add that with an aluminium full frame construction and stylish composite mounting brackets. This is the perfect Cover Lifter for customers who wish for no more heavy lifting.

 

Covervalet Spa Step in Black Sold out

Covervalet Spa Step in Black

by H2oFun.co.uk
Sold out
£89.50
  • Covervalet Spa Side Step
  • Smart and robust design
  • Four different colours available
  • 2 step unit
  • 


DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.


PRODUCT INFO:


The Covervalet Spa Steps are a handy two step unit that has durability, style and form. In stock for fast delivery other colours available

size of the covervalet spa steps are L 26" W 21.3" H 15.75"

 

Covervalet Spa Step in Taupe Sold out

Covervalet Spa Step in Taupe

by H2oFun.co.uk
Sold out
£89.50
  • Covervalet Spa Side Step
  • Smart and robust design
  • Five different colours available

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.


PRODUCT INFO:


The Covervalet Spa Steps are a handy two step unit that has durability, style and form. In stock for fast delivery 4 other colours available

size of the covervalet spa steps are L 26" W 21.3" H 15.75"

 

    • Plain Blue Overlap Swimming Pool Liner
    • Overlap Liner For 48" & 52" High Above Ground Pools
    • American Manufactured Highest Quality Above Ground Pool Liners
    • 7 Days A Week Installation Helpline 
    • Quick & Easy Installation

     

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    Plain blue Overlap Liners by Swimline are 16 thou on the floor & walls. These liners are suitable for 48” and 52” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

    The Overlap liners are great quality liner that can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. 

    These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
    Doughboy, Vouge, Teakwood Discovery, Equinox , Regatta & Regatta II, Topaz, Reprieve, Oracle, Trevi 205, Summer Days.

    These liners have a material thickness of:
    Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
    This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

    Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

    DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.


     

     

     

     

    Curved Wall Brush For Swimming Pools

    by World Of Pools.com
    £14.95
    • For Use In Liner & Tiled Pools
    • Fits All Telescopic Poles
    • Curved Design Suits All Pools
    • Sturdy Bristles

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

    RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    Curved Wall Brushes are ideal for cleaning the floor and walls of all dirt and marks, which your filtration does not remove.

    The Curved wall Brush will fit all telescopic poles

    DAB Nova Submersible Pump

    by H2oFun.co.uk
    £225.00
    • DAB 200 Submersible N0 Float
    • DAB 300 Submersible with Float
    • DAB 600 Submersible with Float
    • Fiber Reinforced Plastic pump body
    • Liquid temperature up to 35°C
    • Operating range: from 1 to 16 m3 /h, with head up to 10.2 metres.
    • Pumped liquid: dirty water without fibres

     

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.


    PRODUCT INFO:

    The Nova submersible pump range 200, 300 and Dab 600 is suitable for automatically operated fixed domestic applications for draining basements and garages that are subject to flooding. Thanks to its compact, easy to handle shape, it may also be used as a portable pump for emergencies such as lifting water from tanks or rivers, emptying swimming pools, fountains, excavations, and pedestrian subways. It is also ideal for gardening, and hobby applications in general. The level switch allows fixed installation, ensuring automatic operation. Version with special stainless steel pump shaft also available (SV).

    Hydro resistant technopolymer pump body, cover, and suction grid. Stainless steel motor, roto shaft, and bolts and screws. Threefold seal with interposed rings with oil pre-chamber.

     



    Davey Silensor SLL Water Cooled Swimming Pool Pump
    • Davey Silensor SL Water Cooled Swimming Pool Pump
    • No ventilation needed for greater flexibility when installing
    • Extra-Large 4.5 litre leaf basket-long intervals between cleaning
    • Automatic cut off to protect pump
    • Inbuilt Thermal Cut out eliminating the need for a separate cut off switch
    • Suitable for saltwater pools
    • Featuring a larger basket than the SLS model

    DELIVERY: We aim to send SLL Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: SLL Pool Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Davey Silensor SLL are an extremely quiet Swimming Pool Pump. Davey Silensor SLL Watercooled swimming pool pump are an Australian made water cooled pump with a unique water cooled system will actually add heat to your pool. The Davey Silensor SLL Pumps represent great value for money given the quality of build, quiet running, long life expectancy and great look. Massive 4.5 litre basket requires less emptying than normal size pumps.

    If you are looking to change your pump or have a new build this pool pump will offer more than most pumps in terms of build and performance. In stock for fast delivery

     

    Deluxe Air Pillow for Debris Cover
    • Air Pillow for Winterizing Above Ground Pools
    • 1.2m x 1.52 when inflated
    • Reduces stress on Winter Cover
    • More than one Air Pillow is recomended on larger pools
    • Fast Delivery on this product

    DELIVERY: In-stock items are sent out on a next working day service

    RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    Air Pillows are ideal for above ground swimming pools. Winterizing your above ground pool using an Air Pillow under the winter cover helps eradicate water build up on the cover surface. This reduces the stress on the cover, increasing its life span and makes managing your pool that much easier with far less surface water to remove at the beginning of the season. The Air Pillow is 1.2 x 1.52 when inflated. Please only inflate air pillow approx. 50%

     


    Deluxe Solar Cover Protectors - World of Pools

    Deluxe Solar Cover Protectors

    by Plastica
    £159.00
    • Deluxe Reel & Cover Protector
    • Helps protect your reel system and cover from the elements
    • Made to allow 355mm steering wheel
    • Available in blue or white
    • Blue protects from rain and frost, white protects from sun & harmful UV

     

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    Deluxe Reel & Cover Protectors


    These Deluxe Reel & Cover Protectors are for use with swimming pool cover reels. Their purpose is to help protect your pool cover from the elements such as rain, frost and sun, prolonging its life. Our protective covers come in blue or white. Our blue cover works to protect your cover and reel system from rain and frost. Our white cover works to protect your pool cover from sun damage caused by harmful UV rays. These reel & cover protectors are a must-have for those wishing to take care of their pool cover and make it last longer.

    Sizes:

    Small fits reels up to 15'

    Medium fits reels up to 18'

    Large fits reels up to 22'

    Extra Large fits reels up to 26' 

     

     

    Deluxe Tarpaulin Above Ground Debris Covers

    Deluxe Tarpaulin Above Ground Debris Covers

    by World of Pools.com
    £285.00
    • Above Ground Pool Debris Covers - Made to Measure
    • Strongest Above Ground Pool Cover in UK
    • Keeps Out Debris
    • Stops Algae Growth
    • Made By Plastica
    • Use during Summer or Winter
    • Deluxe Tarpaulin that blocks debris and light
    • Made to Measure - Allow 7 days for Delivery

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Above ground deluxe tarpaulin swimming pool debris covers Stop not only debris but will stop algae growth too. No more green pools. The Tarpaulin materials blocks all debris and light. This swimming pool debris cover can be used during Summer or Winter. The cover comes complete with elasticated tie-downs and wall clips

    This is a made to order cover, standard sizes have been added but we can make this to fit all size above ground pools, please email or call for more details

    Deluxe Tarpaulin Wooden Pool Debris Covers

    Deluxe Tarpaulin Wooden Pool Debris Covers

    by World of Pools.com
    £420.00
    • Extra Strong Wooden Pool Debris Covers made to measure
    • Stops Debris & Algae Growth
    • Strongest Above Ground Pool Cover in UK
    • Use during Summer or Winter
    • Deluxe Tarpaulin that blocks debris and light
    • Made to measure so please allow 7 days for Delivery

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

    PRODUCT INFO:

    Wooden Pool deluxe tarpaulin swimming pool debris cover. The Tarpaulin materials blocks all debris and light. This swimming pool debris cover can be used during Summer or Winter. the cover comes complete with elasticated tie-downs and wall clips

    This is a made to order cover, standard sizes are included but we can make this to fit all size wooden pools, please email or call for more details

    Deluxe Vacuum Head For Swimming Pools

    Deluxe Vacuum Head For Swimming Pools

    by World Of Pools.com
    £29.95
    • Swimming Pool Vacuum Head For Liner & Tiled Pools
    • Adjustable Suction rate
    • Great For Collecting Stubborn Debris
    • Allows You To Cover Huge Areas Quickly
    • Clear You Pool Floor Perfectly
    • Good On All Sized Pumps

    DELIVERY: Deluxe vac heads are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Deluxe Vac Head can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    The deluxe vacuum head is used for cleaning and vacuuming the pool floor, it has adjustable suction dials that allow you to change the suction and force of the head.

    The Deluxe Vacuum Head has a special design for fast and easy cleaning, with it's long-wearing brushes being able to quickly loosen tough algae spots from the pool. The shape of the head allows deeper cleaning and gives you a much easier experience when cleaning your pool.

    DH35AX | Dantherm DH35 dehumidifier

    DH35AX | Dantherm DH35 dehumidifier

    by H2oFun.co.uk
    £3,375.00
    • Dantherm DH35 High performance German manufactured unit
    • Efficient and economical to run
    • Low Cost compared with fully ducted options
    • Easy to Install and use
    • 2 year Warranty
    • Extraction rate of up to 53 litres per day
    • Ideal for swimming pools, gyms, factories, archives and museums, drying rooms and commercial storage

     

    DELIVERY: Danthern DH35 Swimming Pool Dehumidifiers are sent out on a 5 to 6 working day service

    RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    DH35AX | Dantherm DH35 Dehumidifier Swimming Pool & Swim Spa Hot Tub Dehumidifier 

    hydropro swimming pool hot tub spa dehumidifier air heater price match beat promise guarantee h2ofun

    DH35AX | Dantherm DH35 dehumidifiers are suitable for most swimming pool or spa rooms.

    Dantherm DH35AX units are easy to install, and fit like for like for the old Vaporex range. You can also use the old mounting bracket if you preferable. DH35AX runs off a standard 13 amp supply and Installation is straightforward – just fix the enclosed wall mounting bracket to the wall and then hang the dehumidifier on the bracket.

    You will then have to route a condensation pipe to waste. Never run the condensate back into the pool as this could be a health risk.

    The Dantherm DH35AX is available with two air heating options.

    Sizing a dehumidifier correctly is essential for it to be able to cope with the volume of water in your spa or pool room.

    If you can supply us with the information below, we can recommend the unit that will work correctly from Day 1.

    • Surface Area In Metres (Length X Width)
    • Temperature In °C Of Both Water In Pool/Spa & Air In Pool/Spa Room
    • Position Room Is In. e.g. Cellar / Pool House / Loft / Boat

    Call Us On 01322 554 870 To Discuss The Correct Dehumidifier For Your Needs

    DH65AX | Dantherm DH65 dehumidifier

    DH65AX | Dantherm DH65 dehumidifier

    by H2oFun.co.uk
    £4,925.00
    • Dantherm DH65 High performance German manufactured unit
    • Efficient and economical to run
    • Low Cost compared with fully ducted options
    • Easy to Install and use
    • 2 year Warranty
    • Extraction rate of up to 36 litres per day
    • Ideal for swimming pools, gyms, factories, archives and museums, drying rooms and commercial storage

     

    DELIVERY: Danthern DH35 Swimming Pool Dehumidifiers are sent out on a 5 to 6 working day service

    RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    DH65AX | Dantherm DH65 Dehumidifier Swimming Pool & Swim Spa Hot Tub Dehumidifier 

    hydropro swimming pool hot tub spa dehumidifier air heater price match beat promise guarantee h2ofun

    DH65AX | Dantherm DH65 dehumidifiers are suitable for most swimming pool or spa rooms.

    The DH 65 condensation dehumidifiers is designed to manage excess moisture in swimming pool areas as well as commercial and industrial spaces. The wall-mounted units can remove up to 45.8 litres of moisture per day, effectively controlling humidity levels to prevent mould and mildew growth.

    The dehumidifiers have been fitted with an easy-to-use control system that lets you set your desired humidity level. They feature a durable aluminium housing with cataphoresis-painted coils for corrosion resistance as well as an electronic humidistat for precise control. The factory-installed heating coil ensures a constant temperature within the room.

    The Dantherm DH65AX is available with two air heating options.

    Sizing a dehumidifier correctly is essential for it to be able to cope with the volume of water in your spa or pool room.

    If you can supply us with the information below, we can recommend the unit that will work correctly from Day 1.

    • Surface Area In Metres (Length X Width)
    • Temperature In °C Of Both Water In Pool/Spa & Air In Pool/Spa Room
    • Position Room Is In. e.g. Cellar / Pool House / Loft / Boat
    Specifications Units DH 65
    Operating temperature range
    °C
    5-40
    Operating humidity range
    %
    40-80
    Air flow
    m³/h
    800
    Sound pressure level @ 1 m
    dB(A)
    48
    Dehumidification capacity*
    l/24h
    45.8
    Dehumidification capacity**
    l/24h
    31.9
    Specific Energy Consumption*
    kWh/l
    0.57
    Specific Energy Consumption**
    kWh/l
    0.65
    Heat recovered*
    kW
    3.3
    R454C gas weight/CO₂ equivalent
    kg/t
    0.85/0.126
    Power supply
    V/Hz
    230/1 ph/50
    Power consumption, max (compressor on)
    kW
    1.26
    Current, max.
    A
    5.3
    Product size (W x D x H)
    mm
    1306 x 265 x 720
    Weight
    kg/t
    76

    Call Us On 01322 554 870 To Discuss The Correct Dehumidifier For Your Needs

     

    In Addition to Pool and Spa rooms this dehumidifier is also suitable for the following situations

    Suitable for