Swimming Pool Heat Pumps

Swimming Pool Heat Pumps are the most popular pool heating method. We sell standard heat pumps with the latest R32 Gas and the latest Inverter Heat Pumps. Inverter Swimming Pool Heat Pumps offer substantial savings with COP of upto 15. Inverter Heat Pumps are also Ultra Quiet. World Of Pools only sells the heat pumps that we have checked and tested ourselves. We stock Hydropro, Waterco, Calorex, DanthermHeatseeker, Rio & Garden Pac. Norsup full inverter heat pumps are available from our retail shop.  Call us for more information, we know our heat pumps inside out, trust their reliability and can recommend with conviction which will be best for you and how you use your pool.
  • Poolstyle Mini Above Ground Pool Plug & Play Heat Pump
  • FAST DELIVERY
  • Works When Air Temperature Is Over 10°C
  • Heat Pump For Larger Intex, Bestway & Other Above Ground Pools
  • Suits Pools Up To 18ft x 48" Round Or 18ft x 9ft Rectangular - 35m3
  • 2 Year Full Replacement Warranty

DELIVERY: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

PRODUCT INFO:

The Poolstyle Mini Plug & Play Heat Pumps come in two sizes for the larger Intex & Bestway above ground pools. The 6kw Poolstyle Mini Heat Pump is perfect for pools up to 25m3, such as an Intex 15ft x 48" Metal Frame Pool, whilst the 8kw Poolstyle Mini Heat Pump is ideal for pools up to 35m3, such as a 18ft x 48" Metal Frame Pool. Only suitable for pool heating during the main Summer months. A Solar Cover must be used too. Buy Now For Same Day Despatch.

Poolstyle Mini Plug & Play Heat Pumps For Above Ground Pools are designed purely for the larger above ground pool market. Intex, Bestway & Summer Escapes pools are perfect for this heat pump

The minimum Flow rate from your pool pump is 2m3/hr to start the Poolstyle Mini Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

Digital Heating Control Panel - Control Heating Up To 40°C

No ByPass Required if using small Intex pumps

The Poolstyle Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible at night.

The Poolstyle Mini 6kw Above Ground Pool Heat Pump is for pools up to 25m3

The Poolstyle Mini 8kw Above Ground Pool Heat Pump is for pools up to 35m3

Below are suggestions for above ground pool sizes that the Poolstyle Mini Heat Pumps are suitable for

Metal Frame Pools

6kw - 10ft x 30 inch Metal Frame Pool
6kw - 12ft x 36 inch Metal Frame Pool
6kw - 12ft x 48 inch Metal Frame Pool
8kw - 15ft x 48 inch Metal Frame Pool
8kw - 18ft x 48 inch Metal Frame Pool

 

Easy Set Pools

6kw - 8ft x 30 inch Easy Set Pool
6kw - 10ft x 30 inch Easy Set Pool
6kw - 12ft x 30 inch Easy Set Pool
6kw - 12ft x 48 inch Easy Set Pool
8kw - 15ft x 48 inch Easy Set Pool
8kw - 18ft x 48 inch Easy Set Pool
8kw   -  21ft x 48 inch Easy Set Pool

 

Rectangular & Oval Framed Pools

8kw - 14ft x 8ft x 48 inch Pool
8kw - 18ft x 9ft x 48 inch Pool
8kw - 18ft x 10ft x 48 inch Pool
    • Flotide A10 9.6kw Above Ground Pool Heat Pump
    • Plugs Into A 13 amp Socket with a fitted RCD Plug
    • In Stock - 2-3 day lead time
    • Perfect Heater For Larger Intex & Bestway Pools
    • No Electrician Costs Needed To Hardwire In
    • Costs Less To Run Than A 3kw Bestway Electric Heater
    • 2 Years Parts & Labour Warranty 

    DELIVERY: Flotide A10 Plug & Play Above Ground Pool Heat Pumps are sent out on a 2 working day service

    RETURNS: Flotide A10 9.6kw Plug & Play Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

    PRODUCT INFO:

    Flotide A10 Plug & Play 9.6kw Above Ground Pool Heat Pumps are designed for larger Intex & Bestway pools, up to 30,000 litres. This would equate to a 20ft x 12ft Bestway pool.

    Flotide A10 Plug & Play Heat Pumps have an exceptionally high COP of 6, meaning you can get up to 6 times more heat into your pool than it will cost you in electricity.

    Flotide A10 Plug & Play Heat Pumps will function down to an air temperature of 5°C, but as with any heat pump, the warmer the air the more efficient they are and the more heat transferred into your pool. The warmer the air the better!!

    CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

    When purchasing a heat pump large enough for your pool you would usually have to take into account the cost to be hard wired into mains by and electrician on its own spurs and RCD. The Flotide A10 Plug & Play Above Ground Pool Heat Pump is reasonably priced, user friendly and runs from a standard UK 13amp 3-pin plug. Everything you could want from a heat pump unit for an above ground swimming pool. 

    Below is a guide that is is based on summer use with a good solar cover being used. 

     

    Flotide A10 Plug & Play Above Ground Pool Heat Pump pools - Pools up to 30m3

    Minimum Flow rate required 5.5m3/hr 

    Supplied with 50mm sockets to connect to a bypass kit or hosetails. These can be purchased separately

    We can also assist with the correct fittings you may need to install this heater. Fittings will depend on the make and model of your pool and how far away from the pool you want the heat pump situated. Please call us on 01322554870 for help and advise on heat pump installations

    CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

    Hydropro P8/32 Swimming Pool Heat Pump - On/Off - World of Pools
    • Hydropro P8/32 Swimming Pool Heat Pump 
    • Suitable For All Year Use If Sized Correctly - Call For Advice
    • Hydropro P8 - Maximum 30m3 Pool - Summer Use
    • 2 Years Parts & Labour Warranty
    • 7 Years Compressor & Heat Exchanger Warranty
    • We Price Match & Ship Same Day

    DELIVERY: Hydropro P8/32 Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Hydropro P8/32 Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Hydropro P8/32 Heat Pump is ideally sized for a 15ft x 48" Above Ground Pool to extend the Swimming season from May to September. A good Solar Cover must be used in conjunction with the heater

    Hydro Pro P8 Heat Pump

    Ideal Pool Size 15ft x 48" Round

    Maximum Pool Size 20ft x 12ft x 4ft Oval

    Hydropro P8 Swimming Pool Heat Pumps are capable of both heating and cooling and will perfectly suit small pools with a maximum volume of water of 30m3 if used during the main summer months. Outside of the main Summer months, the heat pump should be used on smaller pools. Realistically, the Hydropro P8 could heat a pool with a capacity of 15m3 All Year Round, if insulated properly.

    Using the Hydropro P8/32 to heat your pool for an extended season of May to September we would suggest that your pool is a maximum size of 15ft round x 48" deep.

    The HydroPro P range of heat pumps has a working ambient air temperature of  –5 degrees Celcius, although at this temperature reduced C.O.P. and output is reduced. It might not seem that you need to heat your pool in low temperatures but having a Swimming Pool Heat Pump that will not cut out when the air temperature reaches 8 or 10 degrees Celcius has huge benefits at the beginning and end of the Extended Swimming Season. At these times of the year the morning and evening air temperatures can be as low as 5 degrees Celcius. When other heat pumps will stop working the Hydropro P8/32 will still be heating your pool for you to use whenever you want to. 

    Outside installation is required for the Hydropro P8 to function correctly. Reduced airflow, both in or out, will dramatically reduce performance

    With over 15 Years experience sizing and supplying Swimming Pool Heat Pumps we can provide Expert advice and save you a massive 80% on your heating bills. The Hydropro P8/32 Swimming Pool Heat Pump is despatched on the Same Day as ordering.

    For help and advice on sizing your heat pump correctly call 01322 554 870

    Hydropro P8/32 Swimming Pool Heat Pump - Users Manual English

    Hydropro P8/32 Swimming Pool Heat Pump - COP Curve

     

     Hydropro P Series Heat Pump Diagram

    Hydropro P8/32 Heat Pump Data

     

    heating power input

    1.32 kW

    heating capacity (A27/W27)

    8.31 kW

    heating capacity (A15/W26)

    5.71 kW

    maximum volume of pool

    with good insulation

    30m3

    30,000 Litres

    running current

    5.9 AMPS

    coefficient (C.O.P.)  at A27/W27

    6.34

    coefficient (C.O.P.)  at A15/W25

    4.33

    compressor

    rotary

    refrigerant

    R32

    fan quantity

    1

    fan power input

    80

    fan rotate speed

    850 RPM

    fan direction

    Horizontal

    noise level (10 metres)

    42 dB (A)

    water connection

    50mm

    nominal water flow

    3 m/h3

    dimensions (L/W/H)

    95cm / 35cm / 60cm

    unit shipping dimensions (L/W/H)

    97cm  / 37cm / 62cm

    net weight/ shipping weight

    47 KG

    slow fuse current

    15  AMPS

    Hydropro P6/32 Swimming Pool Heat Pump - World of Pools
    • Hydropro P6 Swimming Pool Heat Pump 
    • Hydropro P6 Heat Pumps Are Best Suited For Pools Max 20m3 
    • New R32 Gas
    • Reliable, Efficient & Great Value For Money
    • 2 Year Parts & Labour Warranty
    • We Price Match & Ship Same Day

    DELIVERY: Hydropro P6 Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Hydropro P6 Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a Hydropro P6 Heat Pump is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Hydropro P6 Swimming Pool Heat Pumps are suitable for pools up to 20m3, which would be a maximum size of 18ft x 9ft with a depth of 4ft, during the main summer months of June, July & August. A Solar Cover must be used too.

    If it is to extend the swimming season from May to September then a Bestway or Intex 12ft x 48" pool is the maximum size pool advisable for the Hydropro P6. 

    Hydropro P6/32 Heat Pump

    Ideal Pool Size 12ft x 48" Round

    Maximum Pool Size 18ft x 9ft x 4ft deep

    Order your Hydropro P6 Swimming Pool Heat Pump now for same day despatch.


    Hydropro P6 Heat Pump Data

     

    power input

    0.97 kW

    heating capacity (A27/W27)

    5.81 kW

    heating capacity (A15/W26)

    4.12 kW

    maximum volume of pool

    with good insulation

    20 m3

    20,000 Litres

    running current

    4.5 AMPS

    coefficient (C.O.P.)  at A27/W27

    5.87

    coefficient (C.O.P.)  at A15/W25

    4.25

    compressor

    rotary

    refrigerant

    R32

    fan quantity

    1

    fan power input

    68

    fan rotate speed

    830 / 870 RPM

    fan direction

    Horizontal

    noise level (10 metres)

    39 dB (A)

    water connection

    50mm

    nominal water flow

    2.3 m/h3

    dimensions (L/W/H)

    77cm / 31cm / 58cm

    unit shipping dimensions (L/W/H)

    85cm  / 33cm / 60cm

    net weight/ shipping weight

    27 KG / 27 KG

    Power supply type c or d breaker

    15 AMPS

     

    For help and advice call 01322 554 870

    Hydro S ECO Heat Pump For Swimming Pools - World of Pools
    • Flotide Swimming Pool Heat Pump
    • Summer Season - May to August
    • Ideal Heat Pump For Summer Pools Such As Intex Or Bestway
    • Same Internal Technology As Hydropro Heat Pump
    • 2022 Models now with Digital Control
    • Frost Protection - Cuts Out Below 8°C Air Temperature
    • Same Day Dispatch & Price Match Promise

     

    DELIVERY: Flotide Swimming Pool Heat Pumps are sent by specialist hauliers and take between 1-3 days for delivery.

    RETURNS: Flotide Swimming Pool Heat Pumps can be returned unused and in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

    Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When we receive the Hydro S Swimming Pool Heat Pump, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

    PRODUCT INFO:

    Flotide Swimming Pool Heat Pumps are the least expensive heat pumps in the UK market. Manufactured to the highest European standards, the Hydro S Heat Pump is suitable for above ground or in-ground pools. One big advantage these Heat Pumps have over other systems is the low water flow rate required, so these great Heat Pumps will even work on Intex and Bestway. 2021 models come with digital display and in a smart black casing

    Flotide Heat Pumps are manufactured in the same factory and to the same high specification as the Hydropro. The latest model now have a digital display panel and come in a smart black casing.

    The Flotide Heat Pump replaced the Hydro S Heat Pump for 2022. These new heating systems are a very cost effective way of heating your pool. As the cost of electricity has risen this type of heater has now become the most popular form of heating in the UK.

    On Mainland Europe Heat Pumps have long been used to heat Pools and the Flotide Range of Heat Pumps are manufactured by a Belgium company that have long been a market leader in the industry.

    The Flotide Heat Pumps are an extremely efficient form of heating for your water with a Coefficient Of Performance (C.O.P.) of up to 4.7, which means for every £1 it costs to run you get up to £4.70 of heat transferred to the pool. Every 1kw of electricity costs on average of 14p per hour which means that running an Elecro 7.5kw Electric Heater will cost £1.05 per hour to run. Running this heater for 8 hours per day will cost £8.40 per day to run. By running a Heat Pump you can reduce these running costs by up to 80%, which means an hourly running cost of only 18p. That equates to a saving of £5.76 per day or £170 per month. Over a 5-month period you could save £850.

    7.5kw Electric Heater Costs £216 Per Month To Run, compare this against an 8kw ECO Heat Pump that costs just £28.80 Per Month To Run

    Flotide Heat Pump Can Save You £850 Per Year

    • High Coefficient Of Performance Up To 4.8
    • Extremely Compact Unit
    • Titanium Heat Exchanger
    • Precision Temperature Control Dial
    • Low Noise Compressor & Fan
    • 2 Year Warranty

    Our Opinion

    The main advantages of a Flotide heat pump are the long term savings, these will only increase as the price of electricity increases. The capital outlay is higher than an electric heater but these should be recouped within one to two years. Other forms of heating such as electric and gas are quicker and less dependent upon the weather but in general a Flotide heat pump if correctly spec'd and installed will be the best choice for most owners.

     

    For help & advice on choosing the correct heat pump for your pool please call us on 01322 554 870

    Hydro S Swimming Pool Heat Pump Sizing Dimensions

    Minimum Flow Rate For Hydro S Heat Pumps

     Hydro S Heat Pump Model Minimum Flow Rate 
    Flotide A5 Heat Pump 2.5 m3/h
    Flotide A7 Heat Pump 2.5 m3/h
    Flotide A10 Heat Pump 2.6 m3/h
    Flotide A13 Heat Pump 3.5 m3/h


    Flotide Swimming Pool Heat Pump - COP Curve Chart

    Flotide Swimming Pool Heat Pump - Users Manual

     

    The chart below is a guide to help with sizing a Hydro S Heat Pump for your above ground pool.

    Easy Set     

    Above Ground Pools

    Hydro S Swimming Pool Heat Pumps For Easy Set Above Ground Pools

    Pool Size

    Cubic Metres

    Hydro S Eco Heat Pump 

    8ft Diameter

    4.5

    Hydro S 3

    10ft Diameter

    5.90

    Hydro S 3 

    12ft Diameter

    7.80

    Hydro S 5 

    15ft Diameter

    13.40

    Hydro S 5

    18ft Diameter

    29.80

    Hydro S 7

    or

    Hydro S 10

     

      Metal Framed     

    Above Ground Pools

    Hydro S Swimming Pool Heat Pumps For Metal Frame Above Ground Pools

    Pool Size

    Cubic Metres

    Hydro S Eco Heat Pump 

    10ft Diameter

    6.70

    Hydro S 3

    12ft Diameter

    8.90

    Hydro S 5

    15ft Diameter

    17.50

    Hydro S 5 

    or

    Hydro S 7

    16ft Diameter

    22.80

    Hydro S 7

    18ft Diameter

    33.40

    Hydro S 10

    21ft Diameter 48.10 Hydro S 13
    • AG Mini 2.9kw Above Ground Swimming Pool Heat Pump
    • Plug & Play 3-Pin UK Plug With RCD Breaker
    • Plug & Play 2.9kw Heat Pump For Intex, Bestway & Above Ground Pools
    • Heats An 18m3 Pool To 30°C - Works Down To 12°C Air Temperature
    • Costs Only 8p Per Hour To Run (0.59kw/hr)
    • 2 Year Parts Warranty

    DELIVERY: AG Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: AG Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

    PRODUCT INFO:

    AG Mini Plug & Play Heat Pumps are ideal for above ground pools up to 18m3, such as an Intex or Bestway 12ft x 48" Metal Frame Pool.

    It is suitable for heating a pool of 18m3 during the main Summer months. A Solar Cover has to be used whenever the pool is not in use, especially at night as this will speed up pool heating time and reduce heat loss at night by up to 5°C. Buy Now For Same Day Despatch.

    The AG Mini Plug & Play Heat Pump requires 0.59kw of power to produce nearly 3kw of power out. That is roughly 8p an hour to get the equivalent of 40p of heat from the Poolex Nano Heat Pump into your pool making it so much cheaper to run than an electric pool heater.  You could even recoup the outlay in the first year in savings on your electricity bill.

    The minimum flow rate from your pool pump is 2m3/hr to start the AG Mini Plug & Play Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

    Digital Heating Control Panel - Control Heating Up To 30°C

    No ByPass Required if using small Intex pumps

    The AG Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

    A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible, especially at night.

    The AG Mini Plug & Play Above Ground Pool Heat Pump is suitable for pools up to 12m3 

    Below are suggestions for above ground pool sizes that the AG Mini Plug & Play Above Ground Pool Heat Pump is suitable for

     

    Bestway & Intex Metal Frame Pool Heat Pump
    10ft x 30 inch Metal Frame Pool
    12ft x 36 inch Metal Frame Pool
    12ft x 48 inch Metal Frame Pool

     

    Intex & Bestway Easy Set Pool Heat Pump
    8ft x 30 inch Easy Set Pool
    10ft x 30 inch Easy Set Pool
    12ft x 30 inch easy Set Pool
    12ft x 36 inch Easy Set Pool
    15ft x 36 inch Easy Set Pool
    15ft x 48 inch Easy Set Pool

     

    Nano Action Reversible 3kw Heat Pump For Above Ground Pools

    by World of Pools.com
    Sold out
    £590.00
    • Poolex Nano Action Reversible Heat Pump -
    • Works Down To 5°C Air Temp 
    • In Stock for Next Working Day Delivery
    • Plug & Play 3kw Heat Pump For Intex & Above Ground Pools
    • Heats A 14m3 Pool To 30°C - Works Down To 5°C Air Temperature
    • Only 8p Per Hour To Run
    • 2 Year Parts Warranty

    DELIVERY: Poolex Nano Action Reversible Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

    RETURNS: Nano Action Reversible Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Poolex Nano Action Reversible Heat Pump For Above Ground Pools is  especially suited to heat small above ground pools up to 14m3 to 30°C

    You will need a length of hose to connect to Intex or Bestway 1.25" Flexible Pool Hose

    You Can Order This At The Same Time As The Nano Heat Pump

    Unlike other small Plug & Play Heat Pumps the Nano Action Reversible Heat Pump is made to the same specification as much larger heat pumps. Weighing Only 18kg it is easy to move and is designed to last for years.

    With a start-up rate of less than 1kw and a running current of 630w the Nano Action Reversible Heat Pump will only cost around 8p per hour to run. Less than £1 per day. When compared to a normal electric heater which can cost around £5 per day, You could save enough money in the first year to pay back the initial outlay.

    Minimum Flow rate required on Nano Action Reversible Heat Pump is 2m3/hr

    No ByPass Required

    A Good Quality Solar Cover Must be Used With This Heat Pump to help during the day and to preserve as much heat as possible at night. 

    Below are suggestions for above ground Intex or Bestway pool sizes that the Nano Above Ground Pool Heat Pump is suitable for

    Metal Frame Pools

    10ft x 30 inch Metal Frame Pool
    12ft x 30 inch Metal Frame Pool
    12ft x 36 inch Metal Frame Pool
    12ft x 48 inch Metal Frame Pool

     

    Easy Set Pools

    8ft x 30 inch Easy Set Pool
    10ft x 30 inch Easy Set Pool
    12ft x 30 inch easy Set Pool
    12ft x 36 inch Easy Set Pool
    15ft x 30 inch Easy Set Pool
    15ft x 48 inch Easy Set Pool

     

    Sun Spring Plug & Play Above Ground Pool Heat Pump
    • Sunspring 5kw to 12kw Swimming Pool Heat Pump
    • Swimming Pool Heat Pump That Plugs Into A 13 amp Socket
    • Extend Season May to September Works Down To 8° C
    • Great For Intex, Bestway & Other Above Ground Pools
    • 15 Minute Installation With No By-Pass Required

    DELIVERY: Sun Spring Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Sun Spring Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    The Sunspring Plug & Play Swimming Pool Heat Pumps are made especially above ground pools. These heat pumps, up to the 9kw, do not have to be hard-wired in, saving up to £500 on installation costs. As the 5, 8 & 12 Sun Spring Plug & Play Swimming Pool Heat Pump will plug into a 13 amp socket and does not require a by-pass, installation can be carried out in as little as 15 minutes by anyone. 

    We have other ranges of Plug & Play Swimming Pool Heat Pumps available, which are less expensive than the Sunspring Heat Pump, but just as well made and all with 2 Year Warranties.

    Poolstyle Mini 6 & 8 Plug & Play Above Ground Pool Heat Pump - Click Here

    Flotide A10 9.6kw Plug & Play Swimming Pool Heat Pump - Click Here

    To get the best from your Sunspring Heat Pump it is advisable to size the heat pump to the middle of its capabilities. To assist you in choosing the most suited Sunspring Heat Pump for your pool we have provided a guide of MAXIMUM POOL SIZES. If the volume of water in your pool is equal to or larger than the maximum volume it is always advisable to go for the next larger heat pump, as it will be easier to maintain your pool water temperature and potentially provide extended use outside the main 3 summer months.

    Sunspring Heat Pumps Will Be Despatched Same Day If Ordered By 11 AM

    For advice and help on choosing the Sunspring Heat Pump suitable for your pool please call us on 01322554870

    Maximum Pool Size

    Sunspring 5 Above Ground Pool Heat Pump  pools up to 12m3 - 15ft x 36" Metal Frame Pool

    Sunspring 8 Above Ground Pool Heat Pump  pools up to 20m3 - 15ft x 48" Metal Frame Pool

    Sunspring 12 Above Ground Pool Heat Pump  pools up to 30m3 - 18ft x 48" Metal Frame Pool

    Minimum Flow rate required  

    3m3/hr on Sunspring 5

    4m3/hr on Sunspring 8

    5m3/hr on Sunspring 12

    Sunspring Heat Pumps come with graduated hose-tails to connect to 1.25" & 1.5" flexible hose. Also included are Glue Sockets for 50mm or 1.5" rigid pipe. In addition, no bypass kit is necessary.

    The Sun Spring Heatpumps have a 2 Year Collect & Repair Or Replace Warranty. 

    If you require help in sizing your heat pump or have any questions, please call us on 01322 55 4870

     

    Hot Splash Above Ground Pool Heat Pump - 3.35kw

    by World of Pools.com
    Sold out
    £440.00
    • Hot Splash Above Ground Pool Heat Pump 3.35kw
    • Plug Into A 13 amp Socket
    • Heats Above Ground Pools Up To 10m3 to 30°C
    • Summer Season Late May to August / Early September
    • 1 Year Parts Warranty

    DELIVERY: Hot Splash Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Hot Splash Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    The Hot Splash Heat Pump is designed for Above Ground Pools and is one of the smallest above ground pool heat pumps available. Built to heat Intex, Bestway, Summer Escapes and other Summer Use above ground pools with a size of up to 10m3 plugging directly into a 13amp socket

    The Hot Splash Heat Pump is very cheap to run when compared to a comparable plug & play electric heater. For example, a 2.2kw Intex Electric Heater requires 2.2kw of power to run at around 42p per hour to run, whilst only giving you 2.2kw of heat. Compare this with the Hot Splash Heat Pump which only requires 0.56kw of electricity in to produce 3.35kw of power out. That is only 10p an hour to get the equivalent of 63p of heat.

    Using the Hot Splash Heat Pump could give you a saving of £2.50 per day compared to an Intex heater, making a saving of over £250 in one Summer.

    This saving will pay back the extra cost of the Hot Splash Heat Pump in one year. The following year all you have is a £250 saving and a warm pool.

    As with all swimming pool heaters, a Solar Cover is essential and the better the quality the more money you save.

    The Hot Splash Heat Pump has a Minimum Flow rate requirement of 2m3/hr 

    Digital Heating Control Panel - Control Heating Up To 30°C & No ByPass Required

    All Swimming Pool Heat Pumps are designed to heat Pool water slowly but very cost-effectively. If you correctly size a Hot Splash heat pump to heat your pool from cold to warm it will normally take 2 - 3 days, but following this initial heating period, it is just a matter of using the Hot Splash Heat Pump to keep up the heat every day.

    A Good Quality Solar Cover Must be Used With This Heat Pump

    A 400 Micron Blue Solar Cover is recommended to be used with this pool heater to preserve as much heat as possible at night. Click Here to go to the 400-micron Blue solar cover page

     

    hot splash above ground pool heat pump world of pools

     

     

    We would recommend the Hot Splash Above Ground Pool Heat Pump for pools up to 10m3. If your pool is larger than this we would recommend a bigger heat pump.

    The images below are our suggestions for above ground pool sizes to help you decide if the Hot Splash Heat Pump is suitable for your pool.

    If you would like advice on choosing a heat pump please call on 01322 554 870

    hot splash above ground pool heat pump metal frame pool sizing

    10ft x 30 inch Metal Frame Pool
    12ft x 30 inch Metal Frame Pool

     

    Intex Easy Set Heat Pump Sizing Hot Splash Heat Pump

    8ft x 30 inch Easy Set Pool
    10ft x 30 inch Easy Set Pool
    12ft x 30 inch easy Set Pool
    12ft x 36 inch Easy Set Pool

     

    Nano Action 2.8kw Heat Pump For Above Ground Pools

    by World of Pools.com
    Sold out
    £540.00
    • Nano Heat Pump Works At 10°C Air Temp
    • in stock for fast delivery
    • Plug & Play 3kw Heat Pump For Intex & Above Ground Pools
    • Heats A 12m3 Pool To 30°C - Works Down To 10°C Air Temperature
    • Only 8p Per Hour To Run
    • 2 Year Parts Warranty

    DELIVERY: Poolex Nano Plug & Play Above Ground Pool Heat Pumps & Hot Tub Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Poolex Nano Plug & Play Above Ground Pool Heat Pumps & Hot Tub Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

    PRODUCT INFO:

    Poolex Nano Plug & Play Heat Pumps are ideal for above ground pools up to 12m3, such as an Intex or Bestway 12ft x 48" Metal Frame Pool.

    It is suitable for heating a pool of 12m3 during the main Summer months. A Solar Cover has to be used whenever the pool is not in use, especially at night as this will speed up pool heating time and reduce heat loss at night by up to 5°C. Buy Now For Same Day Despatch.

    The Nano Plug & Play Heat Pump requires 0.7kw of power to produce nearly 3kw of power out. That is roughly 8p an hour to get the equivalent of 40p of heat from the Poolex Nano Heat Pump into your pool making it so much cheaper to run than an electric pool heater.  You could even recoup the outlay in the first year in savings on your electricity bill.

    The minimum flow rate from your pool pump is 2m3/hr to start the Nano Plug & Play Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

    Digital Heating Control Panel - Control Heating Up To 30°C

    No ByPass Required if using small Intex pumps

    The Poolex Nano Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

    A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible, especially at night.

    The Nano Plug & Play Above Ground Pool Heat Pump is suitable for pools up to 12m3 

    Below are suggestions for above ground pool sizes that the Nano Plug & Play Above Ground Pool Heat Pump is suitable for

     

    Bestway & Intex Metal Frame Pool Heat Pump
    10ft x 30 inch Metal Frame Pool
    12ft x 36 inch Metal Frame Pool
    12ft x 48 inch Metal Frame Pool

     

    Intex & Bestway Easy Set Pool Heat Pump
    8ft x 30 inch Easy Set Pool
    10ft x 30 inch Easy Set Pool
    12ft x 30 inch easy Set Pool
    12ft x 36 inch Easy Set Pool
    15ft x 36 inch Easy Set Pool
    15ft x 48 inch Easy Set Pool

     

    ECO+ Plug & Play Swimming Pool Heat Pump

    by World of Pools.com
    Sold out
    £690.00
      • ECO+ Above Ground Pool Heat Pump
      • Plugs Into A 13 amp Socket with a fitted RCD Plug
      • Vertical Waste for Ease Of Use
      • Massive C.O.P. Of 5.3 for better economy
      • Correct size heat pump can extended Summer Season
      • No Electrician Costs Needed To Hardwire In
      • Ideal For Intex, Bestway & Other Above Ground Pools
      • 2 Year Parts Warranty Only

      DELIVERY: ECO+ Above Ground Pool Heat Pumps are sent out on a 2 working day service

      RETURNS: ECO+ Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

      Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

      When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

      PRODUCT INFO:

      The Eco+ Above Ground Pool Heat Pump has an exceptionally good COP of 5.3 meaning you can get up to 5 times more heat into your pool than it will cost you in electricity. The Eco+ Heat Pump is a small compact unit and needs very little flow rate to operate which is ideal for the small above ground swimming pools. Above Ground Pool Heat Pumps draw in air and expel air, the air they expel is very cold, other heat pumps tend to blow their freezing cold air (Waste) horizontally which can cause pool owner headaches due to this being a problem of where the heat pump can be situated. The Eco+ Above Ground Pool Heat Pump blows its waste vertically, this mean the heat pump can be sited out the way and out of eye contact from the pool and well hidden with filtration unit. You still must allow the unit to draw fresh warm ambient air for this to work and the ambient air has to be 8°C and above for the unit to work efficiently. The warmer the air the better!!

      The Eco+ Above Ground Pool Heat Pump's most valuable feature is the fitted plug and RCD which makes installation easy and less expensive compared to any other efficient heating system on the market, the eco+ Swimming Pool Heat Pump comes complete with all unions and hose tails for all different style swimming pools to be installed with ease. With full flow technology so there is no need for the traditional bypass kit to control the flow, this can now be done with a user friendly colour display 3 button flow indicators.

      When purchasing a heat pump you would usually have to take into account the cost to be hard wired into mains by and electrician on its own spurs and RCD. The Eco+ Above Ground Pool Heat Pump is reasonably priced, user friendly, vertical exhaust and runs from a standard UK 13amp 3-pin plug. Everything you could want from a small compact heat pump unit for an above ground swimming pool.  Please Note the 14kw still has to be hard wired in

      Below is a guide to the size of heat pump that maybe suitable for your pool. This is based on summer use with a good solar cover being used. Increasing the size of heat pump can make a significant difference in performance and can exten the season either side of the main june - august months. We can assist with this, please call us on 01322554870 with any questions.

      ECO+4 Above Ground Pool Heat Pump  pools up to 10m3 - this would suit a 12ft x 36" Metal Frame Pool

      ECO+9 Above Ground Pool Heat Pump  pools up to 30m3 - this would suit a 18ft x 48" Metal Frame Pool

      Eco+14 Above Ground Pool Heat Pump pools upto 45m3

      Minimum Flow rate required  

      3m3/hr on ECO+4

      5m3/hr on ECO+9

      5m3/hr on Eco+14

      Supplied with hosetails to connect to flexible hose - no bypass kit is required. We can also assist with the correct fittings you may need to install this heater. Fittings will depend on the make and model of your pool and how far away from the pool you want the heat pump situated. Please call us on 01322554870 for help and advise on heat pump installations