DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin recommend their Side or Top Mount Filters with OC1 Swimming Pool Filter Media. We can supply 4 types of Certikin Side mount filters that come complete with OC-1 Media to provide high quality filtration

Certikin Side mount filter are available in the following sizes, 20", 24", 30" and 36"

OC-1 filter media is a new and innovative alternative to sand or glass media. OC-1 media captures 20 times more dirt and debris than traditional filter media such as glass or sand. It is also lightweight, meaning it is easy to use.

OC-1 filtration media is UK made and completely changes the way you should filter your pool. it has been proven retain debris without increasing filter pressure or reducing the flow rate. Debris capacity of OC-1 is more than 20 times that of sand or glass. OC-1 removes 81% of 10 micron particles in a single pass and can even remove particles as small as 1 micron without flocculation or coagulation.

Unlike sand or glass, OC-1 is lightweight, easy to handle and transport. 

Reduces pool running costs

OC-1 can reduce energy usage and water consumption. Its open cell formation makes it possible to achieve a greater flow of water through the filter. In many cases this means that pump speeds can be reduced by around 20%, without compromising the original flow, producing impressive energy savings. Alternatively, on new installations a smaller pump can be specified to produce the same flow – saving running costs and initial outlay. Due to its constant flow rate and huge debris capacity, OC-1 can reduce backwashing frequency and water consumption.

DELIVERY: MSF Mega Sand Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Mega MFS Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Flotide MFS Side Mount Sand Filter

Made of premium grade high density polyethylene. The Mega line offers heavy duty operation and sustains a high working temperature. Only first class virgin high density polyethylene raw materials made by Phillips Chemicals are used in the production of our filters. The unique twist lock is designed for ease of servicing and maintenance of the filter.

The Mega S Series Side Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Mega Side mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

17" requires 40kg media, suitable for pools upto 38 cubic meters

20" requires 70kg media, suitable for pools upto 52 cubic meters

24" requires 125kg media, suitable for pools upto 70 cubic meters

27" requires 185kg media, suitable for pools upto 100 cubic meters

DELIVERY: Mega MFV Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

RETURNS: Mega MFV Sand Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

PRODUCT INFO:

Mega MFV Top Mount Sand Filter is made of premium grade high density polyethylene. The Mega line offers heavy duty operation and sustains a high working temperature. Only first class virgin high density polyethylene raw materials made by Phillips Chemicals are used in the production of our filters. The unique twist lock is designed for ease of servicing and maintenance of the filter.

The Mega S Series Side Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Mega Side mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

17" requires 40kg media, suitable for pools upto 37 cubic meters

20" requires 70kg media, suitable for pools upto 52 cubic meters

24" requires 125kg media, suitable for pools upto 70 cubic meters

27" requires 185kg media, suitable for pools upto 100 cubic meters

DELIVERY: We aim to send Superpool Side Mount Sand Filter For Swimming Pools out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This Superpool Side Mount Sand Filter For Swimming Pools can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Superpool side mounted filter are made from extremely robust and hard wearing fibreglass tank with a smooth Gel coat. These filters are ideal for medium to large sized pools and come complete with a large 9.5" clear lid for easy sight view of the inflow diffuser along with a helpful removal tool. The tank alone comes with a 10 years warranty. 5 years longer than the Tagelus or Lacron. 

Superpool Side Mount Filter 20" requires 100kg media - pools up to 65 cubic metres

Superpool Side Mount Filter 26" requires 150kg media - pools up to 85 cubic metres

Superpool Side Mount Filter 30" requires 250kg media - pools up to 100 cubic metres

Superpool Side Mount Filter 36" requires 375kg media - pools up to 130 cubic metres

DELIVERY: Side Mount Sand Filters will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Side Mount Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Flotide Side Mount Sand Filter 

Flotide Side Mount Sand Filter

Great value, Side Mount Sand filter from Mega Group. Flotide is an established European supplier specialising in quality pool products. Clean, sparkling water is a very important swimming pool feature, and can be achieved using a mega top mount sand filter. 6 way multi port valve and gauge is included.

The Flotide Side Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Flotide Side mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

18" requires 50kg media, suitable for pools upto 40 cubic meters

21" requires 85kg media, suitable for pools upto 60 cubic meters

26" requires 155kg media, suitable for pools upto 80 cubic meters

28" requires 215kg media, suitable for pools upto 100 cubic meters

DELIVERY: Top Mount V Series Mega Sand Filters normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Top Mount Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Mega Top Mount V series sand filters are a great value, quality sand filter from Mega Group. Mega is an established european supplier specialising in quality pool products. Clean, sparkling water is a very important swimming pool feature, and can be achieved using a mega top mount sand filter.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Lacron Side Mount Sand Filter

Lacron is an established British Manufacturer specialising in quality pool products. Clean, sparkling water is a very important swimming pool feature, and can be achieved using a high end sand filter such as the Lacron. A lacron filter is the most efficient way to ensure perfect water quality for years to come. The Lacron Sand Filters come complete with tank, face fittings, multiport valve and gauge. They can be used with standard 16/30-grade silica filter sand. Lacron filters are perfect for residential pools from small above ground pools, through to larger inground domestic installations. The larger filters are primarily designed for light commercial applications. The main tank structure is manufactured from extremely hard wearing glass reinforced polyester (GRP). LSR filters are tested to 4 Bar and are designed to operate at a maximum pressure of 2.5 Bar.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Lacron Side Mount Sand Filter

Lacron LRS side mounted filter are made from extremely hard wearing glass reinforced polyester (GRP). These filters are ideal for medium to large amounts of water; they come complete with a large clear lid (204mm) for easy sight view of the inflow diffuser. The tank alone comes with a 5 years warranty and UV corrosion resistant GRP free.

The Lacron LRS Filter also comes complete with a very strong a robust 6-port multiport valve, please find listed below on how each function operates.

Filter –This is the main position that you will be using when the pump is on and circulating. The water is directed through the filter media (i.e. sand/glass) from the top. After filtering dirt and debris it is then directed back the pool through the return lines to your pool.

Backwash – This function allows for the cleaning of the inside of your filter tank. Your filter can hold only so much debris before it starts spitting it back. As a general rule of thumb, you should backwash your filter once a week during the summer season or when the filter pressure rises 8-10 pounds over the clean starting pressure of your system. When backwashing the water, the water forces the debris out of the backwash port where it can be discarded in the correct and safe manor. When backwashing you should keep on backwash until the running water turns clear, this should take 1-2 minutes.

Rinse – This function is used after backwashing to clean plumbing lines and the multi-port valve of any remaining dirt or debris. Rinse will also settle the sand properly to provide a good filter base.

Waste – Sometimes you will need to lower the water level because of heavy rains. The pump will force the water through the valve (bypassing the filter tank for a more direct line) and out the backwash/waste line.

Re-circulate – This function allows for the water to by-pass the filter by just going through the multi-port valve and returning back. You would only use the function when you need to do maintenance/repair to the tank

Closed – Be careful when using this function because this position will not allow any water to flow through the valve. If you are using this function because the system is higher/lower than the water level while performing maintenance, be sure to change the valve back before starting your system.

Winter – Used only when the system is winterized. This position is between two other functions and allows water to flow in all directions. This is used to prevent water being trapped in the valve that could freeze and crack the multi-port valve. This also saves wear and tear on the spider gasket inside the valve. The 30" and 42" filter is a popular choice for commercial applications, this filter needs to be delivered by freight and the additional freight costs are included in the price

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Tagelus Top Mount Sand Filter - Complete  with sand and pea gravel

The Tagelus Top mount Sand filter is a unique fibreglass reinforced tank with superior strength and durability. Tagelus Top Mount Sand Filter are also equipped with a multiport valve with six positions and a clamp to give it durability.

The Tagelus is a high rate sand filter which is designed to operate for years with minimum amount of maintenance work to do. If installed correctly to the instruction supplied, it will provide years of trouble free operation. Dirt is collected in the filter as the water flows through the control valve at the top of the filter and is directed downwards onto the top surface of the filter media bed. The dirt is collected in the media bed and the clean water flows through the lower piping at the bottom of the filter up through the centre pipe into the control valve at the top of the filter.

• Special Lateral design provides superior flow characteristics and long filter cycles for economical operation
• Maximum Operating Pressure 50 psi
• Combination water and media drain makes servicing and winterising fast and easy

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Triton Side Mount Sand Filter - Complete with sand and pea gravel

DELIVERY: We hold Sand media in-stock so offer fast next working day delivery if ordered before 1pm. We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: Sand media can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

We offer High Quality Swimming Pool Sand media 16/30 grade equivalent to .4mm - .8mm specifically produced for the swimming pool market. 25kg bags of filter media that is suitable for swimming pool sand filters. Please call or email us on advise on how much sand is required for your filter as the amount needed on each brand, i.e. Lacron, Mega, Tagulas can vary even if the size of the filter is the same

We hold Swimming Pool Sand Media in-stock for fast next working day delivery.

DELIVERY: We hold glass media in-stock so offer fast next working day delivery if ordered before 1pm. We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

20kg Bags of quality Swimming Pool Glass Media. Glass Media outlasts traditional sand media providing better filtration and longer lasting so reducing media change. Grade 1 Glass .5 - 1mm. Fast next working day delivery on this product

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Multicyclone Prefilter & Water Saver

The MultiCyclone is ideal as a pre-filter as it will extend the life of your existing filter and will cut water consumption, easing your swimming pool filters workload.

Centrifugal filtration working method:

1. Incoming water enters 16 hydro cyclones tangentially, generating a strong centrifugal effect.

2. The sediment is spun out to the hydro cyclone€™s wall, and then spirals down to the sediment bowl.

3. The filtered water migrates towards the centre of the hydro cyclone where the flow reverses and spirals upwards through the outlet.

4. Accumulation of sediment can be visibly monitored through the MultiCyclone€™s clear sediment bowl.

5. The MultiCyclone is easily cleaned by opening the valve. Only 15 litres of water is discharged to cleanse the MultiCyclone. 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The MultiCyclone Plus and Ultra are the future of swimming pool filtration. Using similar vortex technology seen in vacuum cleaners the system eliminates the need for a sand filter or separate cartridge filter. Backwashing is dramatically reduced saving time and money in lost water and chemicals. With no sand or glass media needed the Multi-Cyclone Plus Pool Filter costs less to buy as a complete unit than standard Pool Filters.

MultiCyclone Plus and the Multicyclone Ultra are an all in one Filter that has been developed by Waterco and can  be use don bothe swimming pool and pond filtration systems. One of the main advantages of this system is that it requires far less backwashing saving thousands of litres of water each year and time in terms of man-hours working on pool maintenance.

It comes in thre sizes, suitable for pools up to 50m3 to 100m3. The Plus and Ultra models come in either 1.5" or 2" fittings so will easily retro-fit into your existing pipework. The 2" models are able to manage larger volume sof water

Easy to install on inground or above ground pools up to 100m3.  

The hydro-cyclonic action increases the capacity of the inbuilt 40 square foot filter cartridge five fold, making the MultiCyclone systems equivalent to a 24” sand filter or a 200 square foot swimming pool filter cartridge. The centrifugal section filter pre-filters 80% of the dirt, which would normally clog up the filter and deposits it into the purge valve connected to the lower clear sediment chamber.

This unit is compact, ultra-efficient and can easily be retro fitted into your existing filtration system. As it removes 80% of the dirt before it reaches the integral filter, backwashing only uses 15 litres of water and depending on the swimming pool activity you will only need to clean the filter once every 6 months.

In our opinion, the MultiCyclone Plus and Ultra Swimming Pool Filter will reduce the energy costs of running a swimming pool dramatically, from less heated and chemically treated water being used to backwash the swimming pool to simply having a smaller pump on your swimming pool.

DELIVERY: Intex Size B Filters 29005 are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: 29005 Index B Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur..

PRODUCT INFO:

Intex Size B Filters for Metal Frame Pools & Easy Set Pools should be changed very regularly, in fact Intex suggest every 2 weeks during the Summer. A clean swimming pool filter helps keep your water crystal clear and will mean using fewer chemicals.

Even if an Intex Size B filter is washed out and looks clean the microscopic holes are blocked, making the Intex filter totally useless. A blocked Intex Pool cartridge filter will increase the pressure inside the pump and quickly wear out the motor shortening the lifespan of the pump dramatically.

Replacing the Intex Size B Pool Filter Cartridges as often as required could be very expensive if you had to buy them at retail prices. At World Of Poolswe can offer Intex Branded Filters at below trade prices and you do not have to buy in bulk.

Size B Filters should be used with the following Intex Pumps:

56634 / 5662

DELIVERY: H Filters from Intex are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Type H Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Intex Size H Filter

Intex Filters for Metal Frame Pools & Easy Set Pools should be changed very regularly, in fact Intex suggest every 2 weeks during the Summer. A clean swimming pool filter helps keep your water crystal clear and will mean using fewer chemicals.

Even if an Intex filter is washed out and looks clean the microscopic holes are blocked, making the Intex filter totally useless. A blocked Intex Pool cartridge filter will increase the pressure inside the pump and quickly wear out the motor shortening the lifespan of the pump dramatically.

Replacing the Intex Pool Filters as often as required could be very expensive if you had to buy them at retail prices. At H2oFun we can offer Intex Branded Filters at below trade prices and you do not have to buy in bulk.

designed for use with Intex filter pump item number: 28601/28602 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Intex Skimmer 28000 is a wall mounted skimmer that fits to Intex Pools with pumps 800 gallon and above.

The Skimmer has fittings for both the Intex Easy Set Pool and the Intex Metal Frame Pools. Using an Intex Skimmer will reduce the amount of debris that goes through your pump and filters.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

DELIVERY: Intex Size A Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Intex Size A Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

7.3cm high x 10.8cm wide

6 x twinpack for relax filters saves 25%

Intex recommend changing the filters every two weeks to ensure correct filtration of the Intex Purespa Hot Tub

These filters are suitable for both the Intex Purespa Bubble Hot Tub and Intex Pure spa Jet Therapy Hot Tub