Swimming Pool Sand Filters

Swimming Pool Sand, Glass & Cartridge filters. We stock only the top quality makes, but discounted to the lowest prices. Certikin, Pentair, Mega & Intex
Intex Size B Filter Cartridge - World of Pools
  • Intex size B filter 29005
  • Fits larger intex pools
  • Suitable for 2,500 gallon and 4,000 gallon intex pumps
  • Single filters or box of 6

DELIVERY: Intex Size B Filters 29005 are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: 29005 Index B Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur..

PRODUCT INFO:

Intex Size B Filters for Metal Frame Pools & Easy Set Pools should be changed very regularly, in fact Intex suggest every 2 weeks during the Summer. A clean swimming pool filter helps keep your water crystal clear and will mean using fewer chemicals.

Even if an Intex Size B filter is washed out and looks clean the microscopic holes are blocked, making the Intex filter totally useless. A blocked Intex Pool cartridge filter will increase the pressure inside the pump and quickly wear out the motor shortening the lifespan of the pump dramatically.

Replacing the Intex Size B Pool Filter Cartridges as often as required could be very expensive if you had to buy them at retail prices. At World Of Poolswe can offer Intex Branded Filters at below trade prices and you do not have to buy in bulk.

Size B Filters should be used with the following Intex Pumps:

56634 / 5662

  • Outer Diameter 145mm
  • Inner Diameter 50mm
  • Length 250mm
  •  

    Intex Size H Filter - World of Pools

    Intex Size H Filter

    by Intex
    £9.25
    • Intex Size H Filter (29007)
    • Intex Manufactured Filters
    • Change Regularly For Best Performance
    • Discounted Prices
    • In Stock For Immediate Delivery

     

    DELIVERY: H Filters from Intex are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: Type H Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    .

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    Intex Size H Filter


    Intex Filters for Metal Frame Pools & Easy Set Pools should be changed very regularly, in fact Intex suggest every 2 weeks during the Summer. A clean swimming pool filter helps keep your water crystal clear and will mean using fewer chemicals.

    Even if an Intex filter is washed out and looks clean the microscopic holes are blocked, making the Intex filter totally useless. A blocked Intex Pool cartridge filter will increase the pressure inside the pump and quickly wear out the motor shortening the lifespan of the pump dramatically.

    Replacing the Intex Pool Filters as often as required could be very expensive if you had to buy them at retail prices. At H2oFun we can offer Intex Branded Filters at below trade prices and you do not have to buy in bulk.

    designed for use with Intex filter pump item number: 28601/28602 

     

     

    Intex Deluxe Surface Skimmer - World of Pools

    Intex Deluxe Surface Skimmer

    by Intex
    £28.95
        Wall mounted surface skimmer 28000
      • Requires min 800 gallon p/h intex pump
      • Catches debris before it goes to the bottom of your pool
      • Adjustable bracket for easy set and metal frame pools
      • Removable basket for easy clean

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

        Intex Skimmer 28000 is a wall mounted skimmer that fits to Intex Pools with pumps 800 gallon and above.

        The Skimmer has fittings for both the Intex Easy Set Pool and the Intex Metal Frame Pools. Using an Intex Skimmer will reduce the amount of debris that goes through your pump and filters.

        Intex Purespa S1 Filter - World of Pools

        Intex Purespa S1 Filter

        by Intex
        £16.00
        • S1 Intex Purespa Filter
        • 7.3cm high x 10.8cm wide
        • Fits Massage & Bubble Purespa Hot Tubs
        • Change Every Two Weeks For Optimum Performance
        • Cheaper In Box Of 6 Twinpacks

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

        RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

         

        Intex Pure Spa Filters For The Intex PureSpa Bubble or Jet Massage Hot Tubs. S1 / 29001 E

        The cheapest way to buy the filters is in a box of 6 x twinpacks

        7.3cm high x 10.8cm wide

        Intex recommend changing the filters every two weeks to ensure correct filtration.Intex Purespa Hot Tub

        Suitable for both the Intex Purespa Bubble Hot Tub and Intex Pure spa Jet Therapy Hot Tub

         

        Intex Size A Filter Cartridge - World of Pools
        • Intex Size A Filter Cartridge 29000
        • Genuine Intex Manufactured Filters
        • Change Regularly For Best Performance
        • Discounted Prices
        • In Stock For Immediate Delivery

        DELIVERY: Intex Size A Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

        RETURNS: Intex Size A Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

        .

        When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

        PRODUCT INFO:

        Intex Size A Filters for Metal Frame Pools & Easy Set Pools should be changed very regularly, in fact Intex suggest every 2 weeks during the Summer. A clean swimming pool filter helps keep your water crystal clear and will mean using fewer chemicals.

        Even if an Intex Size A filter is washed out and looks clean the microscopic holes are blocked, making the Intex filter totally useless. A blocked Intex Pool cartridge filter will increase the pressure inside the pump and quickly wear out the motor shortening the lifespan of the pump dramatically.

        Replacing the Intex Size A Pool Filters as often as required could be very expensive if you had to buy them at retail prices. At World Of Poolswe can offer Intex Branded Filters at below trade prices and you do not have to buy in bulk.

        Intex Size A Filters should be used with the following Intex Pumps:

        58604 / 56638 / 56636

         

      • Outer Diameter  105mm
      • Inner Diameter  50mm
      • Length  200mm
      •  

        Relax Twin Pack Filter for Intex Purespa
          • Relax brand filter for Intex Purespa 
          • 7.3cm high x 10.8cm wide
          • Fits Massage & Bubble Purespa Hot Tubs
          • Twin pack
          • Save 25% by buying the 6 pack 
          • Change Every Two Weeks For Optimum Performance

         

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

        RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

        Relax brand of filters for Intex Pure Spa. Quality filter that is designed to fit the Intex PureSpa Bubble or Jet Massage Hot Tubs same size as the intex S1 / 29001 E

        7.3cm high x 10.8cm wide

        6 x twinpack for relax filters saves 25%

        Intex recommend changing the filters every two weeks to ensure correct filtration of the Intex Purespa Hot Tub

        These filters are suitable for both the Intex Purespa Bubble Hot Tub and Intex Pure spa Jet Therapy Hot Tub