DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Combination 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Combination 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain with Tileband 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain with Tile band 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Plain with Tileband 30 thou Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain with Tileband 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain with Tileband 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Patterned 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Patterned 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Patterned 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Patterned 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain Blue 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain Blue 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain Blue 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain Blue 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Replacement Cube Tiled Pattern Overlap Liners by Swimline are 16 thou on the floor & walls, to ensure a professional installation only install the liner on a warm and dry day as these are stretched into place to prevent creases. These liners are suitable for 48” and 52” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

The Overlap liner is probably the least expensive liner you can buy on the market but if installed correctly can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. Here are a few liner installation guidelines that we would strongly suggest following 

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. Always form a cove or install your Easy Cove at the bottom of the pool wall. The coving is a vital part in ensuring a lock is formed at the bottom of your pool. An inadequate cove will result in liner pushing underneath the wall causing the liner to fail.

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

When overlapping your liner be careful not to drag it over any sharp edges to puncture the liner and make sure the overlap is even all the way round. Once you have overlapped it so much aim to have the liner 3” to 6” off the ground before filling and clamp down with heavy duty pegs. 

Start filling the pool, at this stage there should be 1 person inside the pool trying to move out any excess liner material to the edges and ensuring they control the helpers outside the pool to release or hold the liner as necessary.

Whilst filling do not be tempted to drop to much liner in at once as creases will not be able to be pulled out due to the weight of the water. Drop liner in small and even quantities until water level has reached pools walls, at this stage you should not have to drop any more liner in.

These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
Doughboy, Vouge, Teakwood Discovery, Equinox , Regatta & Regatta II, Topaz, Reprieve, Oracle, Trevi 205, Summer Days.

These liners have a material thickness of:
Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

DELIVERY: We aim to agree a timeframe for installation to meet with customers pool build

RETURNS: This product is not available for return given the installation involved

PRODUCT INFO:

Extreme Heavy duty liners that are installed by welding on-site from Proflex. These extreme Liners are ideal for all types of new or existing pools, standard flat bottom pools, Hopper / Wedge shaped pools or bespoke pools with internals steps or unusual designs 

If you are looking for the most amazing finish to you swimming pool the Proflex offer beautiful new designs available for 2024 with our Proflex On-Site Lining Service. 

On-site liners are very heavy-duty liners, that are welded together at your property. This system offers the most durable of finishes unlike traditional bag style liners that are much thinner and degrade and fade over time. The Proflex Liners offer the latest styles that traditional liners and concrete or mosaic pools just cannot offer.

Proflex Liners are more expensive than a traditional liner but the value is in the style, strength, superb finish and ability to cover any style pool. The engineers who install these liners are specifically trained and highly qualified.

Options include 3D Premium Range, the Classic Range and the printed Next Generation Range

Our exclusive range of StoneFlex designs makes it possible to build or renovate a pool using a water-tight membrane with a 3D surface that looks like real stone. StoneFlex membranes are formulated with an enhanced surface coating which ensures superior stain resistance, easy cleaning, and exceptional UV resistance, as well as a dry-stone feel and non-slip grip.

StoneFlex surfaces are covered with 6 layers of protective acrylic coating and have a B slip-resistance rating. 

Our stunning Matrix designs can give a pool the look and feel of real mosaic tiles while providing unparalleled impermeability of leak-free performance.

Our Matrix line includes a pearl and silver layer which produces a dynamic prismatic effect similar to the shine of real glazed mosaic tiles.

Matrix surfaces and the grout in their grooves are protected with an enhanced acrylic coating which provides superior stain resistance and makes them easy to clean.

Please do not hesitate to contact us via email realoffice@btconnect.com or call world of pools on 01322554870 to discuss the Proflex Extreme Liners in more detail