- Fi-Clor Chlorine & Bromine reducer
- Fast acting reducer to correct chlorine or bromine levels
- Neutralises sanitiser levels when overdosed
- Quick dissolving granules in a 2.5kg container
- See Results In Just 2 Hours - No Need To Wait Days
DELIVERY: Fi-Clor Chlorine & Bromine Reducer will be sent out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: Fi-Clor Chlorine & Bromine Reducer can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO: Fi-Clor Chlorine & Bromine Reducer will lower the chlorine or bromine level in a swimming pool or hot tub if accidentally over-dosed. Available in 2.5kg tubs.
Dosing info: Calculate the volume of your swimming pool or hot tub, if in doubt use this link to our Swimming Pool Chemical Handbook to use the handy swimming pool volume calculator. Take an accurate reading of the free chlorine level or available bromine to discover the amount of sanitiser that needs to be removed from the pool or hot tub.
To reduce CHLORINE level, the dosing rate is 7gms of Fi-Clor Chlorine / Bromine Reducer per 1m3 (1,000 litres / 220 gallons) of water for every 1mg/l (ppm) of chlorine to be reduced. For the fair sized swimming pool of 50m3 (50,000 litres / 11,000 gallons), 350gof the product will reduce the chlorine level by 1mg/l (ppm)
To reduce the BROMINE level, the dose rate is 3gms of Fi-Clor Chlorine / Bromine Reducer per 1m3 (1,000 litres / 220 gallons) of water for every 1mg/l (ppm) of bromine to be reduced. For an average sized hot tub of 1.5m3 (1,500 litres / 330 gallons), 4.5g of the product will reduce the bromine level by 1mg/l (ppm).
To achieve the best results, it is advised to distribute the product evenly around the pool or hot tub. Leave at least 2 hours before re-testing and making any further changes to the water if required.
It is very important to under-dose rather than over-dose, as too much Fi-Clor Chlorine & Bromine Reducer can produce a chlorine / bromine demand that may cause overdosing again.