Filters

Brand

Chemical

Colour

Media

NetType

Option

Pool

PoolType

Power

Price

Season

Size

size

Style

Syle

TESTING. Style

Type

Weight

Weight

weight

Best Selling Products

Midas 500 Geobubble Swimming Pool Solar Cover - World of Pools

Midas 500 Gold Solar Cover

from £199.00
Midas 500 Geobubble Swimming Pool Solar Cover - World of Pools

Midas 500 Gold Solar Cover

by Plastica
£199.00
  • Midas 500 Gold and Blue Swimming Pool Solar Cover
  • Geo Bubble design lasts longer compared to standard round bubbles
  • Gold underside provides extra heat retention and reduces water evaporation
  • Reduced water evaporation means reduced chemical usage
  • Solar Covers help keep the Swimming Pool clean
  • Fast Next Day delivery on standard sizes, 5 working days on bespoke covers

 

DELIVERY: Midas 500 Solar Covers are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Midas 500 Solar Covers can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Midas 500 micron Gold Pool Solar Cover is an ideal cover for the UK climate. The Midas 500 will offer the solar benefit while the gold underside provides essential heat retention.

It is important to use a good quality solar cover as the ambient air temperature in the UK varies. As an example in the south of the UK, May night temperatures are between 7 and 10 degrees while daytime temperatures are between 15 and 19 degrees this averages out at between 16 / 11 for the month. Using a good quality solar cover such as the Midas 500 will enable you to start your pool up as early as possible, reducing heating costs especially at night when heat loss is at its highest. 

The Midas 500 is made in the UK by Plastipack, the Gold layered underside has been designed for heat retention which is more important now than ever before. Energy saving heating systems are by far the most popular type of heating now used on swimming pools but retaining as much as the heat as possible is essential in ensuring the pool is kept at the correct temperature for as long as the UK weather permits.

The Gold layer on the Midas will reflect heat back into the water retaining more heat in than other solar covers and the 500 micron means that this is a thicker cover than the standard 400 or cheaper above ground 200 micron solar covers.

Water loss is also important as during the warmer days pool water will be lost due to evaporation. The Midas 500 solar cover will reduce water evaporation by 98%, this has an effect on the amount of chemicals you need to use as with less water evaporation you will reduce the amount of water needed to top the pool up. This means less chemicals will need to be added.

We are able to send out the standard size solar covers on a next day service. If you require a solar cover in a size not listed, please call or email us. Normally we can have a Midas 5000 Solar Cover made within 5 working days so if your pool has a roman end or you want a fitted leading edge please contact us 01322 554 870 or email realoffice@btconnect.com for a quote.

Apollo 400 GeoBubble Solar Cover - Blue & Silver - World of Pools

Apollo 400 GeoBubble Solar Cover - Blue & Silver

from £180.00
Apollo 400 GeoBubble Solar Cover - Blue & Silver - World of Pools

Apollo 400 GeoBubble Solar Cover - Blue & Silver

by World Of Pools.com
£180.00
  • Apollo Cover's Blue & Silver 400 Micron Solar Cover
  • Geo Bubble Better Performance & Longer life
  • Adds Heat & Retains Heat, Reduced Water Evaporation
  • Help Keep Your Pool Clean and Save on Chemicals
  • 4 Year Pro-Rata Warranty (UK & Eire)

DELIVERY: In-stock items are sent out on a next working day service

RETURNS: Apollo Solar Covers can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Apollo Solar Covers last 25% longer than standard 400 micron covers. The Apollo 400 Micron cover has the GeoBubble design, a Blue topside and a silver underside which offers all the benefits of a high-quality UK manufactured standard solar cover with the addition of a silver underside for extra heat retention.

The Apollo 400 will manage the 4 main elements needed for a good solar cover. Evaporation Control, Heat Retention, Temperature Increase and Debris Control

Apollo Solar Cover with Geo-Bubble style bubble which will give more solar gain and has been desigen for added heat retention. This cover is more durable to chemical attack that standard 400 micron covers and comes with a 4-year pro rata warranty.

The Apollo GeoBubble Blue & Silver Solar Cover 400 micron has been designed to save you up to 33% on your heating bills so this will result in quickly paying back the initial outlay for the solar cover The Apollo cover is very eco-friendly and will reduce water evaporation which can be a huge saving if you’re on a water metre. Not only does the Apollo cover have all these great advantages, once on the pool this cover looks the smartest as this doesn’t have a dark colour underside which can make the water look dirty through reflection. The Apollo cover has a silver underside so if the water is clean it will still look sparkling clean when cover is on pool.

We have listed the most common pool sizes in the UK which if order before 12 Noon could be delivered on a next working service. Swimming pools that need either a bespoke size or shape not listed or you would like your solar cover with hemmed perimeter edges or with leading edges attached please call our sales team on the telephone number provides or contact us contact page for a written quotation

When using a solar cover, you should have the cover on the pool so the bubbles are facing down. To maximise performance always keep the cover on the pool when not in use.
Cube Tiled Pattern Overlap Liner For 48" & 52" High Above Ground Pools - World of Pools

Cube Tiled Pattern Overlap Liner For 48" & 52" High Above Ground Pools

from £345.00
Cube Tiled Pattern Overlap Liner For 48" & 52" High Above Ground Pools - World of Pools
Cube Tiled Pattern Overlap Liner For 48" & 52" High Above Ground Pools - World of Pools

Cube Tiled Pattern Overlap Liner For 48" & 52" High Above Ground Pools

by World of Pools
£345.00
  • Cube Tiled Pattern Overlap Swimming Pool Liner
  • American Manufactured Highest Quality Above Ground Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Replacement Cube Tiled Pattern Overlap Liners by Swimline are 16 thou on the floor & walls, to ensure a professional installation only install the liner on a warm and dry day as these are stretched into place to prevent creases. These liners are suitable for 48” and 52” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

The Overlap liner is probably the least expensive liner you can buy on the market but if installed correctly can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. Here are a few liner installation guidelines that we would strongly suggest following 

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. Always form a cove or install your Easy Cove at the bottom of the pool wall. The coving is a vital part in ensuring a lock is formed at the bottom of your pool. An inadequate cove will result in liner pushing underneath the wall causing the liner to fail.

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

When overlapping your liner be careful not to drag it over any sharp edges to puncture the liner and make sure the overlap is even all the way round. Once you have overlapped it so much aim to have the liner 3” to 6” off the ground before filling and clamp down with heavy duty pegs. 

Start filling the pool, at this stage there should be 1 person inside the pool trying to move out any excess liner material to the edges and ensuring they control the helpers outside the pool to release or hold the liner as necessary.

Whilst filling do not be tempted to drop to much liner in at once as creases will not be able to be pulled out due to the weight of the water. Drop liner in small and even quantities until water level has reached pools walls, at this stage you should not have to drop any more liner in.

These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
Doughboy, Vouge, Teakwood Discovery, Equinox , Regatta & Regatta II, Topaz, Reprieve, Oracle, Trevi 205, Summer Days.

These liners have a material thickness of:
Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover - World of Pools

Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover

from £218.00
Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover - World of Pools
Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover - World of Pools
Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover - World of Pools
Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover - World of Pools
Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover - World of Pools
Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover - World of Pools
Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover - World of Pools

Energy Guard 500 micron Geo Bubble Solar Cover - Summer & Winter Cover

by Plastica
£218.00
    • Energy Guard 500 micron Swimming Pool Bubble Cover
    • Summer & Winter Swimming Pool Cover
    • 6 Year Pro Rata Warranty
    • Inhibits algae growth and Reduce filtration/pump time by up to 50%
    • Eliminate water evaporation by 98% + 
    • Reduce chemical consumption by up to 60%
    • Reduce energy consumption by over 50%

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

PRODUCT INFO:

GeoBubble Energy Guard Solar Cover is a combined Summer and Winter Swimming Pool Cover that stops Algae growth and gives you maximum heat retention. The Energy Guard cover absorbs the sun's energy and warms your pool water effectively. Because the Black / Grey cover eliminates algae growth and water evaporation you could see savings of up to 60% on chemical consumption. The GeoBubble Energy Guard cover can also be used as a Winter Cover reducing debris contamination and retaining heat on pools or even ponds that are used all year round

The GeoBubble Energy Guard 500 micron Winter & Summer Pool Cover is Black / Grey cover that inhibits algae use saving you money, time, water and energy usage, it warms your swimming pool water, has spectacular heat retention capabilities and will reduce your chemical use massively and these benefits should make it your first choice when you are looking for a swimming pool cover that will be suitable for both Winter and Summer use.

The GeoBubble Energy Guard 500 Winter & Summer Swimming Pool Cover product has a dark top surface and a black underside. It is this combination that gives it the ability to provide a variety of benefits to the pool owner whilst being formulated for climate conditions in various countries making it an ideal cover to install on a holiday home swimming pool over winter to ensure that you do not have an algae problem in the Spring. The GeoBubble Energy Guard 500-micron summer and winter cover is suitable for use swimming pools in Spain, France, Portugal, Cyprus and many other countries as an All Year-Round cover that will stop algae growth completely.

The GeoBubble Energy Guard 500 Swimming Pool Cover Will Stop Algae Growth All Winter Long

Save money by using up to 60% less pool chemicals

  • Reduce electricity usage by cutting filtration time by up to 50%
  • Save money and time when opening your pool after the winter period.

In the Gallery section, there are images of two pools that were both tested for ten days with no chemical treatment, no filtration and with simulated use. The pool shown in the 1st photo had a standard Solar cover fitted and went green very quickly due to algae growth. The 2nd photo shows a pool with the GeoBubble Energy Guard cover with no algae growth. This simple test was continued for two months and the pool remained clear of algae when the test period ended.

A more comprehensive test was done between October 2008 to April 2009 and a pool was covered with an EnergyGuard 500-micron cover and a woven mesh debris cover with NO WINTER POOL CHEMICALS used. The water was completely clear of algae after the 6-month period. You will save hours of pool preparation time by not having to filter, backwash and vacuum the pool, as well as saving money on chemicals and electricity usage.

Filtration time can be reduced by up to 50% when algae growth is inhibited by using the GeoBubble Energy Guard 500-micron pool cover. This will greatly reduce your electricity usage but filtration will still be required to remove any dirt or impurities from the pool and to circulate the water to allow for chemicals to reach all areas of the swimming pool.

The GeoBubble Energy Guard 500micron Winter & Summer Swimming Pool Covers Reduce Chemical Consumption by up to 60%, Water Evaporation by 98% and Energy Consumption By 50%

You can reduce chemical usage dramatically because of inhibited algae growth, almost eliminating water evaporation and most amazingly, because 90% of chlorine consumed in an outdoor swimming pool is used because the sun destroys it, the Black cover which cuts out sunlight into the swimming pool means that chlorine usage will be so much less in future.

If You Only Want To Buy One Cover This Year That Will Last You Many Years And Can Be Used All Year Round Then The GeoBubble Energy Guard Winter & Summer Cover Is Your Only Choice.

6 year pro rata warranty.

Sol+Guard Geobubble Swimming Pool Solar Cover - World of Pools

Sol Guard Solar Cover - Geobubble

from £245.00
Sol+Guard Geobubble Swimming Pool Solar Cover - World of Pools
Sol+Guard Geobubble Swimming Pool Solar Cover - World of Pools

Sol Guard Solar Cover - Geobubble

by Plastica
£245.00
  • Sol Guard 500 Solar Cover increase pool temperature by up to 8°C 
  • No Weak Spots - Years More Life For Your Cover
  • Extra Protection Against UV & Chemical Compared To Normal Bubble Cover
  • Cut Heating Bills By 50% - 6 Year Pro Rata Warranty

DELIVERY: Sol Guard 500 Covers are delivered on a 2 to 3 day delivery on standard size solar covers. Bespoke made to measure solar covers will take 5 to 7 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO: 

plastica sol+guard solar cover price match beat promise guarantee h2ofunSol Guard 500 solar covers have a bubble shaped almost like a figure 8, the new design offers a multitude of benefits for the pool owner.

Heat gain is a design feature of the Sol Guard Cover that adds up to 8°C FREE heat in your swimming pool. Two ply layered finish and the addition of UV Boosters allows extra solar gain that helps increase pool temperature more than any other cover.

Sol Guard Covers can eliminate water evaporation by 98% +, this greatly reduces your water bills and cuts heat loss dramatically, reducing chemical consumption by upto 30%

hydropro swimming pool hot tub spa dehumidifier air heater price match beat promise guarantee h2ofunIf you would like to ask us to price match a competitor, please click the Price Match image to send us the request.

 

These solar covers significantly reduce your energy costs as they have been designed to practically eradicate evaporation and add heat. Plastipack's heat retention tests, carried out in collaboration with Brighton and London Metropolitan Universities, showed conclusive energy savings of over 50%.

The warranty on the Sol+Guard solar cover is a 6 year pro rata warranty and are supplied in two UV formulations that are covered by our pro rata 5 year warranty.

Stock is held for standard pool sizes such as 10x20, 12x24, 15x30 and 16x32 and we aim to send these out on a next day service. If you need a non standard size, please call or email for a quote.

black 400 micron solar cover & heat retention cover geobubble worldofpools

Black 400 Micron Heat Retention Bubble Cover

from £180.00
black 400 micron solar cover & heat retention cover geobubble worldofpools

Black 400 Micron Heat Retention Bubble Cover

by Plastica
£180.00
  • Black 400 Micron Heat Retention Bubble Cover
  • UV Stabilised Cover
  • Ideal cover where heat retention is more important than solar gain
  • Black cover will stop algae growth
  • 3 year pro rata warranty
  • These are made to order - please allow 5 working days for delivery

DELIVERY: In-stock items are sent out on a next working day service

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

PRODUCT INFO:

The Black 400 Micron Heat Retention Bubble Cover will not only reduce your running costs it will also stop algae growth, cutting your chemical costs dramatically.

made to order, so please allow 5 days for delivery

Plastica Premium Swimming Pool Winter Debris Cover - World of Pools Save 32%

Plastica Premium Swimming Pool Winter Debris Cover

from £651.00
from £445.00
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools

Plastica Premium Swimming Pool Winter Debris Cover

by Plastica
Save 32%
£651.00
£445.00
  • Plastica Premium Swimming Pool Winter Debris Cover
  • "Premium" P Anchor & Strap Fixing
  • Keeps Pool Clean In Winter
  • Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Plastica Premium Winter Debris Covers for Inground Swimming Pools with up to 75% Discount. Buy a UK manufactured Premium Winter Debris Cover for less than you would a "Cheap Import". These Premium Winter Debris Covers Come Complete With All P-Anchor & Strap Fixings. Ideal If Space Is Limited.

World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.

  • 1. The quality is far superior to "cheap imports" that are being offered
  • 2. We can offer the best price without import duties and currency fluctuations
  • 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters

Call 01322 554 870 and order online for FREE Delivery

Plastica Premium Winter Debris Covers for inground pools are supplied with P-Anchors with a Strap. Ideally suited when space is limited the P-Anchor & Strap ensures that the Premium Winter Debris Cover is securely kept in place all Winter without taking up a lot of room around the pool edge.

Premium Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.

Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .

All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.

Premium Winter Debris Covers come complete with P-Anchors to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

Certikin Maple Winter Debris Cover For Swimming Pools - World of Pools

Certikin Maple Winter Debris Cover For Swimming Pools

from £75.00
Certikin Maple Winter Debris Cover For Swimming Pools - World of Pools
Certikin Maple Winter Debris Cover For Swimming Pools - World of Pools
Certikin Maple Winter Debris Cover For Swimming Pools - World of Pools
Certikin Maple Winter Debris Cover For Swimming Pools - World of Pools
Certikin Maple Winter Debris Cover For Swimming Pools - World of Pools
Certikin Maple Winter Debris Cover For Swimming Pools - World of Pools
Certikin Maple Winter Debris Cover For Swimming Pools - World of Pools
Certikin Maple Winter Debris Cover For Swimming Pools - World of Pools

Certikin Maple Winter Debris Cover For Swimming Pools

by Certikin
£375.00
  • Certikin Maple Swimming Pool Winter Debris Cover
  • High Quality Cover Manufactured In The UK
  • Keeps Pool water Clean Through The Winter
  • Available in Green, Tan, Blue, Grey
  • Helps Reduces frost damage
  • Reduces discolouration of liner caused by leaves and other debris
  • Woven Polyethylene with reinforced corners

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Maple Debris Cover is a high quality Winter Debris Covers manufactured to the highest standards. The cover has reinforced corners and comes with stainless stell fixings.

The Certikin Winter Debris Cover is available in four colours, Grey, Green, Tan and Blue. We have quoted standard sizes but can have this cover made to fit all size swimming pools.

A 300mm overlap is added to the cover and below sizes are pool size not cover size so the cover will come a full 300mm around the full perimeter of the swimming pool.

The Certikin Maple Debris Covers are are engineered to withstand horrendous winters and keep your swimming pool from leaves and debris over the winter months.

Maple Winter Debris Covers are made in the UK from Woven Polyethelene 

When ordering the Certikin Criss Cross Winter Debris Cover add your colour choice in the comments section on the order page. 

The Choices Are Grey, Blue, Green or Tan. Colour Chart Below

certikin criss cross winter debris colours

If you require any help or have any questions please call us on 01322 554 870. We will be happy to help.

Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools Save 48%

Plastica Deluxe Winter Debris Cover For 20ft x 10ft Pool

£661.00
£345.00
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools

Plastica Deluxe Winter Debris Cover For 20ft x 10ft Pool

by Plastica
Save 48%
£661.00
£345.00
  • 10ft x 20ft Pool Size Plastica Deluxe Winter Debris Cover
  • Manufactured In UK By Plastica
  • Keeps Pool Clean In Winter Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Plastica deluxe 10ft x 20ft (pool Size) winter debris cover. Our Plastica Winter Debris Covers come with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.

World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.

  • 1. The quality is far superior to "cheap imports" that are being offered
  • 2. We can offer the best price without import duties and currency fluctuations
  • 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters 

Call 01322 554 870 and order over the phone for FREE Delivery

Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.

Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.

Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .

All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.

If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.

Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

SolarWeave Swimming Pool Heat Retention Bubble Cover - World of Pools

SolarWeave Swimming Pool Heat Retention Bubble Cover

from £235.00
SolarWeave Swimming Pool Heat Retention Bubble Cover - World of Pools
SolarWeave Swimming Pool Heat Retention Bubble Cover - World of Pools

SolarWeave Swimming Pool Heat Retention Bubble Cover

by World Of Pools.com
£235.00
  • Solar Weave All Year Round Heat Retention Cover
  • Woven Tear Resistant Top With Solar Bubble Underneath
  • 200 Micron Woven Top Layer & 400 Micron Bubble Layer
  • UV stabilised cover
  • Ideal cover where heat retention and solar gain are equally as important
  • 3 year pro rata warranty
  • These are made to order - please allow 7-10 working days for delivery

DELIVERY: Made To Order - 7 - 10 working days delivery

RETURNS: This product is Made To Order and as such is classed a s a special order which cannot be returned unless with a manufacturing defect. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

PRODUCT INFO:

Solar Weave Swimming Pool Heat Retention Bubble Cover is manufactured for use in frequently used pools where durability is essential. Made from a 400 micron Solar Bubble with a tough, tear resistant woven surface the SolarWeave Heat Retention Cover is particularly suitable for outdoor Commercial or Semi-Commercial pools where the need for heat retention is high, but allowing the benefit of Solar heat gain that other heat retention covers cannot supply. 

The Solar Weave Swimming Pool Heat Retention Cover can be used all the the time the pool is open. If your pool is open 12 months of the year and you require a heat retention cover that will work for you all year round then the Solar Weave cover is for you.

These covers are made to order so lead times are between 7 - 10 days. 

We have shown example prices for standard sized pools but these covers can be made for any size or shape of pool. Please call or Contact Us for a quote

solar weave pdf downloads

Solar Weave Heat Retention Bubble Cover Specification

Combination 30 Thou Swimming Pool Liner - World of Pools Sold out

Combination 30 Thou Swimming Pool Liner

£0.00
Combination 30 Thou Swimming Pool Liner - World of Pools
Combination 30 Thou Swimming Pool Liner - World of Pools
Combination 30 Thou Swimming Pool Liner - World of Pools

Combination 30 Thou Swimming Pool Liner

by Plastica
Sold out
£0.00
  • Combination 20 Thou (0.5mm) Swimming Pool Liner
  • Combination Liner Has A Tileband, Plain Walls & Patterned Floor
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Individual Job Number On Liner For Easy Re-Ordering
  • Liner Tileband Choices In Images To The Left

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Combination 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Combination 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

 

Plain With Tileband 30 Thou Swimming Pool Liner - World of Pools Sold out

Plain With Tileband 30 Thou Swimming Pool Liner

£0.00
Plain With Tileband 30 Thou Swimming Pool Liner - World of Pools
Plain With Tileband 30 Thou Swimming Pool Liner - World of Pools

Plain With Tileband 30 Thou Swimming Pool Liner

by Plastica
Sold out
£0.00
  • Plain with Tileband 30 Thou (0.75mm) Swimming Pool Liner
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Individual Job Number On Liner For Easy Re-Ordering
  • Liner Tileband Choices In Images To The Left

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain with Tileband 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain with Tile band 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Plain with Tileband 30 thou Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

 

Plain With Tileband 20 Thou Swimming Pool Liner - World of Pools Sold out

Plain With Tileband 20 Thou Swimming Pool Liner

£0.00
Plain With Tileband 20 Thou Swimming Pool Liner - World of Pools
Plain With Tileband 20 Thou Swimming Pool Liner - World of Pools

Plain With Tileband 20 Thou Swimming Pool Liner

by Plastica
Sold out
£0.00
  • Plain with Tileband 20 Thou (0.5mm) Swimming Pool Liner
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Individual Job Number On Liner For Easy Re-Ordering
  • Liner Tileband Choices In Images To The Left

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain with Tileband 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain with Tileband 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

 

Patterned 20 Thou Swimming Pool Liner - World of Pools Sold out

Patterned 20 Thou Swimming Pool Liner

£0.00
Patterned 20 Thou Swimming Pool Liner - World of Pools

Patterned 20 Thou Swimming Pool Liner

by Plastica
Sold out
£0.00
  • Patterned 20 Thou (0.5mm) Swimming Pool Liner
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Individual Job Number On Liner For Easy Re-Ordering

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Patterned 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Patterned 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

Patterned 30 Thou Swimming Pool Liner - World of Pools Sold out

Patterned 30 Thou Swimming Pool Liner

£0.00
Patterned 30 Thou Swimming Pool Liner - World of Pools

Patterned 30 Thou Swimming Pool Liner

by Plastica
Sold out
£0.00
  • Patterned 30 Thou (0.75mm) Swimming Pool Liner
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Individual Job Number On Liner For Easy Re-Ordering

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Patterned 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Patterned 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

Plain Blue 30 Thou Swimming Pool Liner - World of Pools Sold out

Plain Blue 30 Thou Swimming Pool Liner

£0.00
Plain Blue 30 Thou Swimming Pool Liner - World of Pools

Plain Blue 30 Thou Swimming Pool Liner

by Plastica
Sold out
£0.00
  • Plain Blue 30 Thou (0.75mm) Swimming Pool Liner
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation Service Available
  • Individual Job Number On Liner For Easy Re-Ordering
  • Range of Plain Pool Colours Aailable

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain Blue 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain Blue 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

Plain Blue 20 Thou Swimming Pool Liner - World of Pools Sold out

Plain Blue 20 Thou Swimming Pool Liner

£0.00
Plain Blue 20 Thou Swimming Pool Liner - World of Pools

Plain Blue 20 Thou Swimming Pool Liner

by Plastica
Sold out
£0.00
  • Plain Blue 20 Thou (0.5mm) Swimming Pool Liner
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Individual Job Number On Liner For Easy Re-Ordering

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain Blue 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain Blue 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools Save 25%

Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover

from £745.00
from £560.00
Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover - World of Pools

Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover

by Plastica
Save 25%
£745.00
£560.00
  • Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover
  • Manufactured In UK By Plastica
  • Keeps Pool Clean In Winter
  • Straps Run Right Across Cover For Extra Strength
  • Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Plastica Criss Cross Winter Swimming Pool Debris Cover  for inground swiiming pools with a Criss Cross finish offering improved strength and durability over the Deluxe Winter Debris Covers. Very tough webbing which is stitched down the full length of a cover and across its width, spaced at approximately 5' to 6' intervals. Ideal For Windy Positions Or Where A More Durable Winter Debris Cover Is Needed.

The Plastica Criss Cross Winter Debris Cover is ideal for swimming pool owners with an outdoor pool. When the summer is over it is time to close down your pool until spring, if you don't fit a pool cover at this time then your pool is likely to fill with garden debris, leaves, and other damaging objects which may well clog up the filtration system and stain the lining of the pool. Our Criss Cross Winter Debris covers are made by in the UK by Plastica and will help protect your Swimming Pool from the elements.

Call 01322 554 870 and order over the phone for FREE Delivery

Made from Woven Polyethylene and UV stabalised these covers have the added strength as the webbing is stitched down the length of the cover and across the width providing you with a very tough winter debris cover for your swimming pool.

Please contact us if you require a quote on a size that is not listed below.

If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.

Please contact us if you require a quote on a size that is not listed below.

Plastica Deluxe Criss Cross Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

Plastica Flush Fix Swimming Pool Winter Debris Cover - World of Pools Save 32%

Plastica Flush Fix Swimming Pool Winter Debris Cover

from £695.00
from £470.00
Plastica Flush Fix Swimming Pool Winter Debris Cover - World of Pools
Plastica Flush Fix Swimming Pool Winter Debris Cover - World of Pools
Plastica Flush Fix Swimming Pool Winter Debris Cover - World of Pools
Plastica Flush Fix Swimming Pool Winter Debris Cover - World of Pools
Plastica Flush Fix Swimming Pool Winter Debris Cover - World of Pools
Plastica Flush Fix Swimming Pool Winter Debris Cover - World of Pools
Plastica Flush Fix Swimming Pool Winter Debris Cover - World of Pools
Plastica Flush Fix Swimming Pool Winter Debris Cover - World of Pools

Plastica Flush Fix Swimming Pool Winter Debris Cover

by Plastica
Save 32%
£695.00
£470.00
  • Plastica Flush Fix Swimming Pool Winter Debris Cover
  • Manufactured In UK To Order
  • Keeps Pool Clean In Winter
  • Flush Fix Fittings For More Attractive Look
  • Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Plastica Flush Fix Winter Debris Covers are supplied with a floor fitting that sits much lower than the level of the sprung anchor holding the Winter Debris Cover. Requiring a little bit more time on installation the Flush Fix Winter Debris Covers are quite often installed on Decking as the fixings have a Brass Flush Fix Anchor Point, which is less prone to splitting wood.

The swimming pool winter debris covers supplied by World Of Pools are all UK manufactured . This is for three main reasons.

  • 1. The quality is far superior to "cheap imports" that are being offered
  • 2. We can offer the best price without import duties and currency fluctuations
  • 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters

Call 01322 554 870 and order over the phone for FREE delivery

Flush Fix Winter Debris Covers for inground pools are supplied with Brass Flush Fix Anchors. Ideally suited when space is at a premium or on wooden decking the Brass Flush Fix Anchor & Sprung Mechanism ensures that the Flush Fix Winter Debris Cover is securely kept in place all Winter.

Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.

Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .

All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.

Our Flush Fix Winter Debris Covers are made in the UK from a UV Stabilised Woven Polyethelene with a Green/Black finish. Our Debris Cover sizes relate to pool sizes but they wiil be produced 2 foot larger on the pool length and width, so when ordering just order your swimming pool size.

The Flush Fix Winter Debris Cover will also help reduce frost damage to the swimming pool and will dramatically reduce any staining from leaves and other winter debris would normally enter into the pool not only saving you money in repairs and stain removal in the Spring but will potentially prolong the life of your liner.

 

Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings - World of Pools Save 48%

Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings

from £561.00
from £293.00
Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings - World of Pools
Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings - World of Pools
Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings - World of Pools
Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings - World of Pools
Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings - World of Pools

Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings

by Plastica
Save 48%
£561.00
£293.00
  • Plastica Replacement Winter Debris Covers
  • No Fixings - 25% Cheaper Way To Replace Your Old Cover
  • Manufactured In UK By Plastica
  • Keeps Pool Clean In Winter
  • Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The Plastica Replacement Winter Debris Covers are manufactured by Plastica from the same woven polyethylene as their standard Covers.

Plastica Replacement Winter Debris Cover For Deluxe, Flush-Fix Or Premium Inground Winter Debris Covers. These Swimming Pool Winter Debris Covers Come With STRAPS ONLY And Are Perfect If You Need To Replace Your Existing Winter Debris Cover But Have All The Fixings Already.

The Plastica Replacement Winter Debris Cover is made from the same material as the Deluxe, Premium & Flush-Fix Winter Debris Cover. The only difference is that they come with STRAPS ONLY and have NO FIXINGS.

Call 01322 554 870 and order over the phone for FREE Delivery

If your Winter Debris Cover has been damaged but you still have the fixings this option will save you up to 25% on our already discounted prices.

The Sizes for the Plastica Replacement Winter Debris Covers shown are pool sizes and the covers will be 1ft larger on all sides. 

If your pool size is not shown please call 01322 554 870 for a quote.

Once you place your order you will be contacted to find out what spacing your current straps are so that the Replacement Winter Debris Cover can match exactly.

Strap spacing is normally between 1m - 1.5m on the width and 1.2m - 1.5m along the length. If you need straps spaced closer there will be a surcharge. Please call 01322 554 870 for a quote.

Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End - World of Pools Save 23%

Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End

from £1,095.00
from £840.00
Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End - World of Pools
Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End - World of Pools
Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End - World of Pools
Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End - World of Pools
Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End - World of Pools
Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End - World of Pools
Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End - World of Pools
Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End - World of Pools

Plastica Deluxe Criss Cross Winter Debris Pool Cover + 5 ft Roman End

by Plastica
Save 23%
£1,095.00
£840.00
  • Manufactured In UK By Plastica
  • Keeps Pool Clean In Winter
  • Straps Run Right Across Cover For Extra Strength
  • Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

A Plastica Deluxe Criss Cross Winter Debris Cover with additional Roman End attachment. The Criss Cross finish offers improved strength and durability over the Deluxe Winter Debris Covers. Very tough webbing which is stitched down the full length of a cover and across its width, spaced at approximately 5' to 6' intervals

The Plastica Criss Cross Winter Debris Pool Cover with Roman End addition is ideal for swimming pool owners with an outdoor pool. When the summer is over it is time to close down your pool until spring, installing a Criss Cross Winter Debris pool cover at this time means your pool will not fill with garden debris, leaves, and other damaging objects which may well clog up the filtration system and stain the lining of the pool. Our Criss Cross Winter Debris covers are made by in the UK by Plastica and will help protect your Swimming Pool from the elements.

Call 01322 554 870 and order over the phone for FREE Delivery

Made from Woven Polyethylene and UV stabalised these covers have the added strength as the webbing is stitched down the length of the cover and across the width providing you with a very tough winter debris cover for your swimming pool.

Please contact us if you require a quote on a size that is not listed below.

If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.

Please contact us if you require a quote on a size that is not listed below.

Deluxe Criss Cross Winter Debris Covers including a 5ft Radius Roman End section come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools Save 29%

Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End

from £1,020.00
from £720.00
Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End - World of Pools

Plastica Deluxe Swimming Pool Winter Debris Cover + 5ft Roman End

by Plastica
Save 29%
£1,020.00
£720.00
  • Plastica Deluxe Swimming Pool Winter Debris Cover With Roman End
  • Manufactured In UK By Plastica
  • Keeps Pool Clean In Winter
  • Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Plastica Deluxe Winter Debris Cover for Swimming Pools with a 5ft Roman End. These debris covers are manufactured 1ft larger than the pool perimeter so a 12 x 24ft Swimming Pool will mean the cover is 14ft x 31ft, including the length of the Roman End. The Cover is then cut to shape in the factory to fit around the Roman End.

These Winter Debris Covers For Swimming Pools with 5ft Roman Ends will protect your Swimming Pool during the winter months. The debris cover will reduce any frost damage to your swimming pool and minimise discolouration caused by leaves and other debris that would otherwise enter your swimming pool.

Call 01322 554 870 and order over the phone for FREE delivery

Our Swimming Pool Winter Debris Covers are made in the UK by Plastica. The material is a Woven Polyethylene which is UV stabalised and comes in a green/black finish.

For other sizes please contact us for a free quote.

Our high quality winter debris covers are manufactured in the UK from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .

All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.

Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

Plastica Premium Swimming Pool Winter Debris Cover - World of Pools Save 36%

Plastica Premium Winter Debris Cover To Fit 32ft x 16ft Swimming Pool

£1,640.00
£1,055.00
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools
Plastica Premium Swimming Pool Winter Debris Cover - World of Pools

Plastica Premium Winter Debris Cover To Fit 32ft x 16ft Swimming Pool

by Plastica
Save 36%
£1,640.00
£1,055.00
  • Plastica Premium 32ft x 16ft Swimming Pool Winter Debris Cover
  • "Premium" P Anchor & Strap Fixing
  • Keeps Pool Clean In Winter
  • Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Plastica Premium Winter Debris Covers for 32ft x 16ft Inground Swimming Pools with up to 75% Discount. Buy a UK manufactured Premium Winter Debris Cover for less than you would a "Cheap Import". These Premium Winter Debris Covers Come Complete With All P-Anchor & Strap Fixings. Ideal If Space Is Limited.

World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.

  • 1. The quality is far superior to "cheap imports" that are being offered
  • 2. We can offer the best price without import duties and currency fluctuations
  • 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters

Call 01322 554 870 For Assistance Choosing The Correct Cover For Your Pool

Plastica Premium Winter Debris Covers for 32ft x 16ft inground pools are supplied with P-Anchors with a Strap. Ideally suited when space is limited the P-Anchor & Strap ensures that the Premium Winter Debris Cover is securely kept in place all Winter without taking up a lot of room around the pool edge.

Premium Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.

Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .

All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.

Premium Winter Debris Covers come complete with P-Anchors to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools Save 36%

Plastica Deluxe Winter Debris Cover For 24ft x 12ft Pool

£900.00
£575.00
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools

Plastica Deluxe Winter Debris Cover For 24ft x 12ft Pool

by Plastica
Save 36%
£900.00
£575.00
  • 12ft x 24ft Pool Size Plastica Deluxe Winter Debris Cover
  • Manufactured In UK By Plastica
  • Keeps Pool Clean In Winter Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

12 x 24 Pool Size Winter Debris Covers with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.

World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.

  • 1. The quality is far superior to "cheap imports" that are being offered
  • 2. We can offer the best price without import duties and currency fluctuations
  • 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters 

Call 01322 554 870 and order over the phone for FREE Delivery

Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.

Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.

Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .

All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.

If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.

Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools Save 37%

Plastica Deluxe Winter Debris Cover For 30ft x 15ft Pool

£1,349.00
£845.00
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools

Plastica Deluxe Winter Debris Cover For 30ft x 15ft Pool

by Plastica
Save 37%
£1,349.00
£845.00
  • 15ft x 30ft Pool Size Plastica Deluxe Winter Debris Cover
  • Manufactured In UK By Plastica
  • Keeps Pool Clean In Winter Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Deluxe 15 x 30 Pool Size Winter Debris Cover from Plastica. The Winter Covers come with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.

World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.

  • 1. The quality is far superior to "cheap imports" that are being offered
  • 2. We can offer the best price without import duties and currency fluctuations
  • 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters 

Call 01322 554 870 and order over the phone for FREE Delivery

Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.

Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.

Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .

All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.

If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.

Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools Save 39%

Plastica Deluxe Winter Debris Cover For 32ft x 16ft Pool

£1,507.00
£925.00
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Winter Debris Cover For 32ft x 16ft Pool

Plastica Deluxe Winter Debris Cover For 32ft x 16ft Pool

by Plastica
Save 39%
£1,507.00
£925.00
  • 16ft x 32ft Pool Size Plastica Deluxe Winter Debris Cover
  • Manufactured In UK By Plastica
  • Keeps Pool Clean In Winter Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Deluxe Winter 16ft x 32ft (Pool Size) Debris Covers. Our Plastica winter debris covers come with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.

World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.

  • 1. The quality is far superior to "cheap imports" that are being offered
  • 2. We can offer the best price without import duties and currency fluctuations
  • 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters 

Call 01322 554 870 and order over the phone for FREE Delivery

Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.

Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.

Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .

All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.

If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.

Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools Save 33%

Plastica Deluxe Winter Debris Cover For 40ft x 20ft Pool

£2,275.00
£1,525.00
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools
Plastica Deluxe Swimming Pool Winter Debris Cover - World of Pools

Plastica Deluxe Winter Debris Cover For 40ft x 20ft Pool

by Plastica
Save 33%
£2,275.00
£1,525.00
  • 20ft x 40ft Pool Size Plastica Deluxe Winter Debris Cover
  • Manufactured In UK By Plastica
  • Keeps Pool Clean In Winter Green / Black Finish
  • UV Stabilised
  • Reduces frost damage
  • Minimises discolouration caused by leaves and other debris
  • Woven polyethylene
  • Plugs provided for holes when not in use

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Plastica 20ft x 40ft (Pool Size) Deluxe Winter Debris Cover. Our Plastica Winter Debris Covers with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.

World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.

  • 1. The quality is far superior to "cheap imports" that are being offered
  • 2. We can offer the best price without import duties and currency fluctuations
  • 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters 

Call 01322 554 870 and order over the phone for FREE Delivery

Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.

Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.

Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .

All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.

If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.

Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.

 

Proflex Extreme On-Site Liner Service

Proflex Extreme On-Site Liner Service

£0.01
Proflex Extreme On-Site Liner Service
Proflex Extreme On-Site Liner Service
Proflex Extreme On-Site Liner Service
Proflex Extreme On-Site Liner Service
Proflex Extreme On-Site Liner Service
Proflex Extreme On-Site Liner Service
Proflex Extreme On-Site Liner Service
Proflex Extreme On-Site Liner Service
Proflex Extreme On-Site Liner Service

Proflex Extreme On-Site Liner Service

by Proflex
£0.01
  • Designed with in-built versatility, PROFLEX®
  • Contact us for quote and to discuss range available
  • Heavy Duty Liners in a Wide Range of Stunning Designs
  • Suitable for constructing new pools or renovating existing pools
  • Installed over almost any type of surface
  • Adapts to all pool shapes and configurations
  • Installation Service Included

DELIVERY: We aim to agree a timeframe for installation to meet with customers pool build

RETURNS: This product is not available for return given the installation involved

PRODUCT INFO:

Extreme Heavy duty liners that are installed by welding on-site from Proflex. These extreme Liners are ideal for all types of new or existing pools, standard flat bottom pools, Hopper / Wedge shaped pools or bespoke pools with internals steps or unusual designs 

If you are looking for the most amazing finish to you swimming pool the Proflex offer beautiful new designs available for 2024 with our Proflex On-Site Lining Service. 

On-site liners are very heavy-duty liners, that are welded together at your property. This system offers the most durable of finishes unlike traditional bag style liners that are much thinner and degrade and fade over time. The Proflex Liners offer the latest styles that traditional liners and concrete or mosaic pools just cannot offer.

Proflex Liners are more expensive than a traditional liner but the value is in the style, strength, superb finish and ability to cover any style pool. The engineers who install these liners are specifically trained and highly qualified.

Options include 3D Premium Range, the Classic Range and the printed Next Generation Range

Our exclusive range of StoneFlex designs makes it possible to build or renovate a pool using a water-tight membrane with a 3D surface that looks like real stone. StoneFlex membranes are formulated with an enhanced surface coating which ensures superior stain resistance, easy cleaning, and exceptional UV resistance, as well as a dry-stone feel and non-slip grip.

StoneFlex surfaces are covered with 6 layers of protective acrylic coating and have a B slip-resistance rating. 

Our stunning Matrix designs can give a pool the look and feel of real mosaic tiles while providing unparalleled impermeability of leak-free performance.

Our Matrix line includes a pearl and silver layer which produces a dynamic prismatic effect similar to the shine of real glazed mosaic tiles.

Matrix surfaces and the grout in their grooves are protected with an enhanced acrylic coating which provides superior stain resistance and makes them easy to clean.

Please do not hesitate to contact us via email realoffice@btconnect.com or call world of pools on 01322554870 to discuss the Proflex Extreme Liners in more detail