- Hydropro P8/32 Swimming Pool Heat Pump
- Suitable For All Year Use If Sized Correctly - Call For Advice
- Hydropro P8 - Maximum 30m3 Pool - Summer Use
- 2 Years Parts & Labour Warranty
- 7 Years Compressor & Heat Exchanger Warranty
- We Price Match & Ship Same Day
DELIVERY: Hydropro P8/32 Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Hydropro P8/32 Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Hydropro P8/32 Heat Pump is ideally sized for a 15ft x 48" Above Ground Pool to extend the Swimming season from May to September. A good Solar Cover must be used in conjunction with the heater
Hydro Pro P8 Heat Pump
Ideal Pool Size 15ft x 48" Round
Maximum Pool Size 20ft x 12ft x 4ft Oval
Hydropro P8 Swimming Pool Heat Pumps are capable of both heating and cooling and will perfectly suit small pools with a maximum volume of water of 30m3 if used during the main summer months. Outside of the main Summer months, the heat pump should be used on smaller pools. Realistically, the Hydropro P8 could heat a pool with a capacity of 15m3 All Year Round, if insulated properly.
Using the Hydropro P8/32 to heat your pool for an extended season of May to September we would suggest that your pool is a maximum size of 15ft round x 48" deep.
The HydroPro P range of heat pumps has a working ambient air temperature of –5 degrees Celcius, although at this temperature reduced C.O.P. and output is reduced. It might not seem that you need to heat your pool in low temperatures but having a Swimming Pool Heat Pump that will not cut out when the air temperature reaches 8 or 10 degrees Celcius has huge benefits at the beginning and end of the Extended Swimming Season. At these times of the year the morning and evening air temperatures can be as low as 5 degrees Celcius. When other heat pumps will stop working the Hydropro P8/32 will still be heating your pool for you to use whenever you want to.
Outside installation is required for the Hydropro P8 to function correctly. Reduced airflow, both in or out, will dramatically reduce performance
With over 15 Years experience sizing and supplying Swimming Pool Heat Pumps we can provide Expert advice and save you a massive 80% on your heating bills. The Hydropro P8/32 Swimming Pool Heat Pump is despatched on the Same Day as ordering.
For help and advice on sizing your heat pump correctly call 01322 554 870
Hydropro P8/32 Swimming Pool Heat Pump - Users Manual English
Hydropro P8/32 Swimming Pool Heat Pump - COP Curve
Hydropro P8/32 Heat Pump Data |
|
heating power input |
1.32 kW |
heating capacity (A27/W27) |
8.31 kW |
heating capacity (A15/W26) |
5.71 kW |
maximum volume of pool with good insulation |
30m3 30,000 Litres |
running current |
5.9 AMPS |
coefficient (C.O.P.) at A27/W27 |
6.34 |
coefficient (C.O.P.) at A15/W25 |
4.33 |
compressor |
rotary |
refrigerant |
R32 |
fan quantity |
1 |
fan power input |
80 |
fan rotate speed |
850 RPM |
fan direction |
Horizontal |
noise level (10 metres) |
42 dB (A) |
water connection |
50mm |
nominal water flow |
3 m/h3 |
dimensions (L/W/H) |
95cm / 35cm / 60cm |
unit shipping dimensions (L/W/H) |
97cm / 37cm / 62cm |
net weight/ shipping weight |
47 KG |
slow fuse current |
15 AMPS |