DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

InverPro 40 Inverter Variable Speed Swimming Pool Pump 1.75kw

If you are looking for the Quietest Pool Pump that uses the least amount of energy we have the InverPro range available. The IP40 Inverter Swimming Pool Pump 1.75kw Pump so can provide significant flow and also run at much lower rate providing significant cost savings compared to traditional pumps

InverSilence technology is self-developed by Aquagem for the most silent and energy saving pump solutions. It combines full inverter technology, volute hydraulic system and DC brushless motor and thus reduces the sound level more than 30 times and saves energy by up to 90%

Full Inverter technology on Inverpro 40 1.75kw

The inverter drive on the Inverpro range can precisely control the pump speed. It allows the running capacity to be automatically adjusted between 20~100%, which is the most energy saving and silent.

Volute hydraulic system

The noise is isolated by the volute structure which makes more turbulence-free flow at less noise compared with the traditional diffuser type.

DC brushless motor

DC brushless motor ensures the pump creates much less noise, higher efficiency and more durability.

How does it work?

• Auto Inverter mode: After setting the water flow, the pump can automatically detect the system pressure and adjust the running capacity to ensure constant flow.
• Manual Inverter mode: The running capacity can be set manually according to different application needs.
• Power consumption reading
• Flow reading
• External control-RS485 modbus
• Soft start protection

DELIVERY: Flotide MFV Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

RETURNS: Flotide MFV Sand Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

PRODUCT INFO:

Flotide 17" MFV Top Mount Sand Filter

Flotide MFV Top Mount Sand Filter is made of premium grade high density polyethylene. The Mega line offers heavy duty operation and sustains a high working temperature. Only first class virgin high density polyethylene raw materials made by Phillips Chemicals are used in the production of our filters. The unique twist lock is designed for ease of servicing and maintenance of the filter.

The Flotide Top Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Flotide Top mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

17" requires 40kg media, suitable for pools upto 38 cubic meters

DELIVERY: Flotide MFV Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

RETURNS: Flotide MFV Sand Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

PRODUCT INFO:

Flotide 20" MFV Top Mount Sand Filter

Flotide MFV Top Mount Sand Filter is made of premium grade high density polyethylene. The Mega line offers heavy duty operation and sustains a high working temperature. Only first class virgin high density polyethylene raw materials made by Phillips Chemicals are used in the production of our filters. The unique twist lock is designed for ease of servicing and maintenance of the filter.

The Flotide Top Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Flotide Top mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

20" requires 70kg media, suitable for pools upto 53 cubic meters

• Colour grey
• Material HDPE
• Connection metric/imperial glue socket
• Pressure 2,8 bar
• Max. temp. 50 °C
• Type MFV20
• Capacity 10 m³/h
• Size 50 mm / 1 1/2"
• Diameter 500 mm
• Weight 12.8 kg
• Sand 70 kg
• Filter area 0.2 m²
• Max flow rate 10 m³/h
• Max. pool vol. 52.5 m³

DELIVERY: Flotide MFV Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

RETURNS: Flotide MFV Sand Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

PRODUCT INFO:

Flotide 24" MFV Top Mount Sand Filter

Flotide MFV Top Mount Sand Filter is made of premium grade high density polyethylene. The Mega line offers heavy duty operation and sustains a high working temperature. Only first class virgin high density polyethylene raw materials made by Phillips Chemicals are used in the production of our filters. The unique twist lock is designed for ease of servicing and maintenance of the filter.

The Flotide Top Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Flotide Top mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

24" requires 125kg media, suitable for pools upto 72 cubic meters

• Colour grey
• Material HDPE
• Connection metric/imperial glue socket
• Pressure 2,8 bar
• Max. temp. 50 °C
• Type MFV24
• Capacity 14 m³/h
• Size 50 mm / 1 1/2"
• Diameter 600 mm
• Weight 20 kg
• Sand 125 kg
• Filter area 0.28 m²
• Max flow rate 14 m³/h
• Max. pool vol. 71.5 m³

DELIVERY: Flotide MFV Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

RETURNS: Flotide MFV Sand Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

PRODUCT INFO:

Flotide 27" MFV Top Mount Sand Filter

Flotide MFV Top Mount Sand Filter is made of premium grade high density polyethylene. The Mega line offers heavy duty operation and sustains a high working temperature. Only first class virgin high density polyethylene raw materials made by Phillips Chemicals are used in the production of our filters. The unique twist lock is designed for ease of servicing and maintenance of the filter.

The Flotide Top Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Flotide Top mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

27" requires 185kg media, suitable for pools upto 102 cubic meters

• Colour grey
• Material HDPE
• Connection metric/imperial glue socket
• Pressure 2,8 bar
• Max. temp. 50 °C
• Type MFV27
• Capacity 18 m³/h
• Size 63 mm / 2"
• Diameter 675 mm
• Weight 20.6 kg
• Sand 185 kg
• Filter area 0.36 m²
• Max flow rate 18 m³/h
• Max. pool vol. 101.5 m³

PRODUCT INFO:

iGarden InverS 1hp Variable Speed Swimming Pool Pump

The iGarden InverS 1hp / 0.8kW Variable Speed Pool Pump is designed to deliver efficient, reliable circulation for medium-sized UK domestic swimming pools. Using advanced inverter technology, the pump automatically adjusts its speed to match your pool's filtration needs.

This intelligent speed control dramatically reduces electricity consumption compared to traditional single-speed pumps, while also extending the life of your filtration system.

Enjoy cleaner water, lower energy bills, and quieter operation.

Key Features:

• Variable speed operation from 30–100% for optimal efficiency
• High-efficiency brushless inverter motor
• Ultra-quiet performance ideal for residential settings
• Clear touchscreen interface for simple control and programming
• Self-priming design for reliable start-up
• Compatible with saltwater and chlorinated pools
• Designed for medium UK pools (approx. 30m³ – 60m³)
• 3-Year warranty on major components

Designed to Solve Common UK Pool Owner Problems

High electricity costs?
The inverter motor automatically reduces power consumption during normal filtration, significantly lowering running costs.

Noisy pump ruining your garden?
The ultra-quiet brushless motor keeps noise levels extremely low, making it ideal for homes with nearby neighbours.

Over-filtration or poor circulation?
Variable speed control allows precise flow adjustment, ensuring consistent filtration and better water clarity.

Complicated controls?
The intuitive touchscreen interface makes daily operation simple, even for first-time pool owners.

Upgrade to the Aquagem InverS Variable Speed Pump for efficient, quiet, and dependable pool circulation.

F.A.Q: iGarden InverS 1hp Variable Speed Pool Pump

Q: What pool size is this pump suitable for?
A: It is ideal for medium-sized UK domestic pools, approximately 30m³ – 60m³.

Q: Is it compatible with saltwater pools?
A: Yes, the pump is suitable for both saltwater and chlorinated swimming pools.

Q: Will it reduce my energy bills?
A: Yes, inverter technology adjusts pump speed to demand, reducing energy consumption compared to traditional pumps.

Q: Is the pump noisy?
A: No, it features an ultra-quiet brushless motor designed for residential environments.

Q: How long is the warranty?
A: The pump comes with a 5-Year Manufacturer Warranty.

Q: Is it easy to use?
A: Yes, the built-in touchscreen provides straightforward control and programming.

PDF DOWNLOADS & VIDEOS:

iGarden InverS 1hp 0.8kw Variable Speed Swimming Pool Pump Manual.

DELIVERY: Orders are usually dispatched the next working day. UK delivery typically takes 1–3 working days.

RETURNS: Aquagem InverS pumps can be returned within 14 days if unused and in original packaging.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.


When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For Commercial Pool Pumps below 5.5HP is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For Commercial Pool Pumps Up To 5.5HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

This Inverter Variable Speed Drive is Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 5.5HP (4.1kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £12,178 per year running costs

Cost of unit £972.00

Suggested Cost of installation £350.00

Total cost £1322.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £8914 Per Annum.

Cost saving is £272 per month and 5 months payback on purchase & installation costs.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.


When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For Commercial Pool Pumps below 3HP is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For Commercial Pool Pumps Up To 3HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

This Inverter Variable Speed Drive is Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 2.5HP (1.865kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- Running Costs £5,540 Per Year

Cost of unit £891.00

Suggested Cost of installation £350.00

Total cost £1241.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £4055 Per Annum.

Cost saving is £123.75 per month and 10 months payback on installation.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery