DELIVERY: Non-Copper Winter Kit will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Non-Copper Winter Kit can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Copper Free Swimming Pool Winterize kits to keep your swimming pool clean during the winter months. Please make sure you balance the pH levels correctly before adding the Shock and Relax Concentrate Cleaner Winter

Small – Closing Pools For Winter up to 45 cubic metres – 1kg Shock Granules & 1lt Relax Concentrate Cleaner Winter

Medium– Closing Pools For Winter 50 to 70 cubic metres – 2kg HTH Shock Granules & 2 x 1lt Relax Concentrate Cleaner Winter

Large – Closing Pools For Winter up to 90 cubic metres – 4kg HTH Shock Granules & 2 x 1lt Relax Concentrate Cleaner Winter

Extra Large -  Closing Pools For Winter up to 130 cubic metres – 6kg HTH Shock Granules & 3 x 1lt Relax Concentrate Cleaner Winter

DELIVERY: Fi-Clor Premium 5 Mini tablets are sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Fi-Clor premium 5 tabs can be returned if unopened and in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Fi-Clor Premium 5 offers 5 actions in one treatment. 1kg of 20g Chlorine tablets that are specifically designed to offer longer lasting disinfection, that combats algae and acts as a clarifier.

Premium 5 tablets are the most effective way of raising the pool water Free Chlorine level, longer lasting action to kill bacteria, fast acting chlorine without effecting pH and reduces Chlorine loss to sunlight and acts as a clarifier

To calculate your swimming pool volume use this link to our Swimming Pool Chemical Handbook to use the handy swimming pool volume calculator

Dose rate: 13 x 20g Tablets Per 50m3 (50,000 litres / 11,000 UK Gallons) per week.

DELIVERY: Fi-Clor Hygiene Effervescent Paddling Pool Tablets Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases

RETURNS: Fi-Clor Hygiene Effervescent Paddling Pool Tablets can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Fi-Clor Hygiene Effervescent Paddling Pool Tablets are ideal for paddling pools without a pump & filter

It is good practise to shock the pool at the start of the swimming season using Fi- Clor Superfast Shock

Fi Clor Hygiene Effervescent Tablets For Use In Paddling Pools

Fi-Clor Hygiene Tablets are to be used to sanitise and protect  bathers in "fill and empty" paddling pools. One Effervescent tablet is sufficient to treat 300 litres (66 gallons) of paddling pool water. Dissolve the Fi-Clor Hygiene Effervescent tablets in a clean plastic bucket of water then pour this into the paddling pool.

Paddling Pools should be emptied and refilled every few days.

DELIVERY: Fi-Clor Chlorine & Bromine Reducer will be sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Fi-Clor Chlorine & Bromine Reducer can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:  Fi-Clor Chlorine & Bromine Reducer will  lower the chlorine or bromine level in a swimming pool or hot tub if accidentally over-dosed. Available in 2.5kg tubs.

Dosing info: Calculate the volume of your swimming pool or hot tub, if in doubt use this link to our Swimming Pool Chemical Handbook to use the handy swimming pool volume calculator. Take an accurate reading of the free chlorine level or available bromine to discover the amount of sanitiser that needs to be removed from the pool or hot tub.

To reduce CHLORINE level, the dosing rate is 7gms of Fi-Clor Chlorine / Bromine Reducer per 1m³ (1,000 litres / 220 gallons) of water for every 1mg/l (ppm) of chlorine to be reduced. For the fair sized swimming pool of 50m³ (50,000 litres / 11,000 gallons), 350gof the product will reduce the chlorine level by 1mg/l (ppm)

To reduce the BROMINE level, the dose rate is 3gms of Fi-Clor Chlorine / Bromine Reducer per 1m³ (1,000 litres / 220 gallons) of water for every 1mg/l (ppm) of bromine to be reduced. For an average sized hot tub of 1.5m³ (1,500 litres / 330 gallons), 4.5g of the product will reduce the bromine level by 1mg/l (ppm).

To achieve the best results, it is advised to  distribute the product evenly around the pool or hot tub. Leave at least 2 hours before re-testing and making any further changes to the water if required.

It is very important to under-dose rather than over-dose, as too much Fi-Clor Chlorine & Bromine Reducer can produce a chlorine / bromine demand that may cause overdosing again. 

Fi-Clor Swimming Pool Chemical Advice Handbook

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Winterize your swimming pool using Relax Cleaner Winter (Concentrate). This is winter solution containing Algicide, and Stain & Scale Inhibitor which also has the ability to clarify pool water. The relax concentrate winter cleaner is designed to keep your pool free from algae over the winter period. This product can be used in conjunction with most swimming pool sanitisers.

Direction for use - Prior to applying the Relax concentrate cleaner winter you should increase the chlorine level to 6ppm and adjust the pH to 7.6. If the winter is mild, further treatment may be necessary

Fast next working day delivery on this pool chemical winterizing product

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Kleen Pool is a summer / winter Copper Sulphate based algaecide treatment. 1 litre of Kleen Pool Longlife will treat a swimming pool 28,200 litres or 6,200 gallons and will help keep your pool free from algae over the winter period. This product can be used in conjunction with most swimming pool sanitisers.

Prior to applying the Kleen Pool algicide you should increase the chlorine level to 6ppm and adjust the pH to between 7.2 and 7.6. If the winter is mild, further treatment may be necessary. Full instructions are provided

DELIVERY: HTH Supercapsules Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: HTH Supercapsules can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO: HTH Supercapsules come in a 4.5kg container. HTH Supersapsules can be used as pool sanitiser. Supcapsules are recommended for pools that are open all year round. The HTH Supercapsule tablets are enclosed in a plastic sleeve making them easy to handle. Chlorine is slowly released as the capsule dissolves, from either end of the sleeve. The surface area of the capsule exposed to water remains constant so, unlike standard 200g tablets, your pool water has an even amount of chlorine going into the pool from start to finish with no chlorine lock

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Fi-Clor Alkalinity Increaser. Swimming Pool water needs to be maintained at a Total Alkalinity of between 80 - 140ppm,this figure can easily tested using Aquachek Test Strips.

Keeping your Swimming Pool Total Alkalinity within these limits will prevent damage to your swimming equipment and ensure that the Chlorine in your swimming pool is working effectively, whilst working as a buffer for the pH level

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Poppers (Blue Press Fix) for solar cover strap sets

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Certikin Pool Pump Inverter will help you to control your pool pump's speed, reducing rpm when required. This inverter is easy to install and simply connects to your wall mounted pool pump. Its manual control allows you to vary the speed of your pump when you do not need full power and revert to full speed when you need to i.e. when you are backwashing or require higher flow. The inverter should be used with a good quality pump such as a Certikin brand, Sta Rite, Waterco etc.

 A 30%  reduction from 2850rpm to 1995 rpm can result in energy saving of 70%. The money you save through using less energy far out-ways the initial cost of this inverter, meaning that this product is an essential item for pool owners who wish to save money.

Certikin Inverter is designed to be used on pumps 1hp to 2hp

Benefits of using a pump inverter:  

- Energy savings (70%-80%)
- Reduces noise

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The clever pool pump inverter is a highly efficient and advance variable speed pump controller saving you energy consumptions up to 80% in some cases. Compatible with 95% of single speed pumps up to 1.5HP and with its really easy installation the pump inverter is really catching on across the pool market. Very User friendly with a four pre-programmed speed and time setting for all swimming pool application

Clever Pool Pump Inverter for swimming pool pumps - With energy prices continually on the rise clever pool pump inverter have designed one of the most advanced, efficient and user friendly variable speed controllers that can be used with single speed pool pumps (up to 1.1kW/1.5HP). Pool owners can expect to save up to £743.00 per year by installing this compact, plug in device.

By using advanced motor control technology, clever pool pump inverter allows the user to set reduced speeds on their pump, which can mean a significant reduction in energy consumption.

The Clever Pool pump Inverter can be set to over 30 different speeds to suit a variety of tasks,  unlike any other product of its kind, it has an advanced, user friendly control panel, which allows the user to set up to four time periods in 24 hours, all with different energy saving levels. By plugging the single speed pool pump into pump inverter, the single speed pump becomes a highly efficient and flexible variable speed pump that can be customised to suit the user’s needs.

Clever Pool Pump Inverter therefore provides one of the highest returns on investment in the industry today. This includes low flow for long and steady filtration, slightly higher flow to run certain types of cleaning and heating products and high flow to do filter back washing.

How does it work?

The Clever Pool Pump Inverter works by allowing your single speed pool pump run at lower flow rates, increasing efficiency and reducing energy consumption by up to 80%.

Single speed pool pumps tend to run at higher capacities than required and therefore are inefficient and expensive.

Clever Pool Pump Inverter has an in built timer that allows you to set up to 4 time periods for your pool pump to run throughout a 24 hour period. It also allows you to choose from 30 different speeds giving you more control than any other product of this kind.

Instock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Hydropro P12 Swimming Pool Heat Pumps are ideal for smaller swimming pools up to 50m3 during the main summer months, slightly less if starting in April or the beginning of May.

The Hydropro P12 comes complete with a 6m Plug and Play Cable that needs to be connected by competent person providing a brilliant plug and play heat pump for both inground and above ground swimming pools

The ideal size pool for this hydropro P12 swimming pool heat pump is a 12ft x 24ft swimming pool

To see other sizes of hydropro heat pumps click here. Full Range Of Hydropro Heat Pumps

For help and advice call 01322 554 870

 If you would like to ask us to price match a competitor, please click the Price Match image to send us the request.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Relax 5kg Stabilised Large Chlorine Tablets (Sodium Dichloroiscyanurate-Dihydrate) are the most simple and effective choice for your swimming pool. Being virtually pH neutral it is possible to dose your swimming pool with Chlorine throughout the summer without affecting the swimming pool water pH by any noticeable degree. If you have an indoor pool, we would suggest using Un-stabilised Chlorine, commonly called Shock.

The ideal chlorine reading in your pool water is between 1 and 3 ppm, this figure can easily tested using Aquachek Test Strips. Testing your pool water daily will allow you to keep control of the swimming pool chlorine level very easily. If the reading is too low, you will simply need to add more Chlorine Granules to the pool water. Full instructions, measurements and quantities are provided on each tub.

Little and often is the most effective method of dosing your swimming pool with Chlorine, as it is a lot easier to correct under dosing than it is over dosing.

The impact of pH on efficiency of Chlorine in your Swimming Pool

Your Swimming Pool pH value has a direct impact on the ability of the Chlorine to sanitise swimming pool water efficiently. A high pH level generally means Chlorine Granules are less efficient.
Water pH of 6.5 - Chlorine in your pool is around 90% efficient
Water pH of 7.0 - Chlorine in your pool is around 75% efficient.
Water pH of 7.5 - Chlorine in your pool is around 47% efficient
Water pH of 8.0 - Chlorine in your pool is around 22% efficient.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Relax 5kg Multifunctional Large Chlorine Tablets are the most simple and effective choice for your swimming pool. Being virtually pH neutral it is possible to dose your swimming pool with Chlorine throughout the summer without affecting the swimming pool water pH by any noticeable degree, whilst adding residual levels of algaecide and clarifier. If you have an indoor pool, we would suggest using Un-stabilised Chlorine, commonly called Shock.

The ideal chlorine reading in your pool water is between 1 and 3 ppm, this figure can easily tested using Aquachek Test Strips. Testing your pool water daily will allow you to keep control of the swimming pool chlorine level very easily. If the reading is too low, you will simply need to add more Chlorine Granules to the pool water. Full instructions, measurements and quantities are provided on each tub.

Little and often is the most effective method of dosing your swimming pool with Chlorine, as it is a lot easier to correct under dosing than it is over dosing.

The impact of pH on efficiency of Chlorine in your Swimming Pool

Your Swimming Pool pH value has a direct impact on the ability of the Chlorine to sanitise swimming pool water efficiently. A high pH level generally means Chlorine Granules are less efficient.
Water pH of 6.5 - Chlorine in your pool is around 90% efficient
Water pH of 7.0 - Chlorine in your pool is around 75% efficient.
Water pH of 7.5 - Chlorine in your pool is around 47% efficient
Water pH of 8.0 - Chlorine in your pool is around 22% efficient.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

1kg Relax Spa Total Alkalinity Plus is used to increase the Alkalinity of your spa water. Spa water tends to lose Total Alkalinity (TA) within days of you filling your spa with fresh water and low TA will result in damage to your spa equipment, pH fluctuation and bather discomfort.

The Ideal levels are between 100 parts per million (ppm) and 140 ppm

• Test the Alkalinity of your spa water at least twice per week, more often if you are located in a soft water area

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:


Epoxy Repair Stick is a two-part epoxy putty. To use, simply break off what you need, knead then apply. Epoxy Repair Stick forms into a white concrete like material and is easy to apply. The mix will be white and will harden within 20-30 minutes. In 24 hours, it will be rock hard and will seal the hole/damaged area. The Epoxy Repair Stick is environmentally and ecologically friendly and has a four-year shelf life. Epoxy Repair Stick will glue swimming pool tiles underwater, it can be used to repair concrete pool surface cracks and particularly handy with fibre-glass repairs and ABS 
 

Fast Delivery on this product

DELIVERY: HTH Blackal Shock Algicide is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: HTH Blockal Shock Algicide can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

HTH Blackal Shock Algicide is a complex, high dose Copper Based Algicide. It is specifically designed to destroy chlorine resistant algae, such as Black Algae, Mustard Algae and Pink Algae, without using a chlorine shock treatment. HTH Blackal Shock Algicide is the most effective pool protection from algae that other Brands of swimming pool algicide can not compare to.

HTH Blackal Shock Algicide Instructions for use in the event of chlorine resistant algae bloom:

• Measure the pH and if necessary, adjust it to between 7.0 -7.4
• Brush the walls and floor where the algae has developed.
• Pour 250ml per 25m3 of water by distributing it directly into the pool with the filtration running.
• Let the filtration run 24 hours a day until the algae is eliminated.
• If necessary, remove the algae debris deposited on the pool floor, vacuuming directly to waste.
• In the case of very cloudy water, after Algae has been destroyed, carry out a floc treatment.

HTH Blackal Shock Algicide Information Sheet - Click For PDF

DELIVERY: Fi Clor ph Increaser is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Fi Clor pH Increaser can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Fi-Clor pH Increaser (soda ash) is an essential pool and hot tub chemical product that helps balance the pH in the water when your pH levels are too low.

Fi-Clor Spa pH Increaser corrects the pH when it falls below 7.2. Acidic spa water is uncomfortable to bathe in and if left unchanged, can cause corrosion of metal parts and fittings.pH Increaser (pH plus) works to increase your pool waters pH balance using soda ash.

Take a pH reading using test strips or test tablets. Increase the pH if the reading is below 7.2. The dose rate is 10g Fi-Clor Spa pH Increaser per 1,000 litres (220 galls) of spa water. Each dose increases the pH by approx 0.2.

With the circulation system running, dose directly in several areas around the spa, avoiding the skimmer. Dose only when bathing has ceased. Continue filtration & re-test after 15 minutes. Repeat treatment until the pH falls within the range 7.2-7.6.

Contains Sodium Carbonate.

DELIVERY: HTH Clarishock is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: HTH Clarishock can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

HTH Clarishock is the new name for Fi-Clor Rapid Clarifier and is an ultra concentrated liquid specifically designed to give the best pool water clarity on swimming pool, with sand or glass filters, when compared with other Brands of swimming pool clarifiers.

Following the directions, and dosing with the simple to use measuring cap, will return your pool water to crystal clear and keep it like that if used regularly.

HTH Clarishock works both as a clarifier and flocculant. Fine particles suspended in your swimming pool water that cannot be retained by the filter, make the water cloudy. HTH Clarishock helps particle aggregation, the process by which suspended colloids clump together and are either collected in the sand filter, to be backwashed out later, or come out of suspension as a floc which then collect at the bottom of the pool as debris to be vacuumed to waste.

Instructions To Clear Cloudy Water in Swimming Pools using HTH Clarishock Rapid Clarifier

Calculate your swimming pool water volume, if in doubt call us and we can advise you. Check pool water balance and ensure Chlorine level is between 1-3ppm & pH level 7.2 - 7.6

Restoring Cloudy Water To Crystal Clear: Dose rate of HTH Clarishock Clarifier: 100ml Per 50m3 (50,000 litres / 11,000 UK Gallons). In order for HTH Clarishock to work your filtration must be running. If debris collects on pool floor, vacuum to waste. Regularly check filter pressure and backwash if required. If pool is still cloudy after 24 hours backwash and repeat dose.

Preventing Cloudy Pool Water: Dose rate of HTH Clarishock Clarifier: 100ml Per 50m3 (50,000 litres / 11,000 UK Gallons) once a week.

DELIVERY: Ahh-Some Spa Cleaner is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Ahh-Some Spa Cleaner can be returned if unopened and in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Ahh Some Spa Cleaner (Bio Film Remover) 453g

Ahh Some Spa Cleaner is an environmentally friendly Bio Film Remover for hot tub spas. It is a formula that when applied to hot tub water, removes the build-up of biofilm (oils, bacteria, lotions, cosmetics, skin and other organic contaminants) within the pool water as well as the plumbing, jets, and shell of your Hot Tub or Spa. 

What is Bio Film? 

 Biofilm is a complex structure which adheres to surfaces that are in regular contact with water. Biofilm consist of colonies of bacteria and other micro organisms (such as yeasts, fungi and protozoa) that secrete a mucilaginous protective coating (EPS matrix) in which they are encased. They can form on solid or liquid surfaces and are typically resistant to conventional methods of disinfection.

Why do Hot Tub Spas Get Bio Film?

 Hot tubs and spas are more difficult to maintain due to the heat of the water. Bio-Film thrives on bacteria comprising of dead skin and other components and due to the warmer temperature of water, bio-film multiplies by the day. A product such as the Ahh-Some Spa cleaner is a must for any hot tub or spa owner.

How does Ahh-Some work?

Ahh-Some works at dislodging the Biofilm EPS matrix. Our formulation include components that soften the outer walls, allowing scrubbers and carrier salts to loosen and break-up these hard to get rid of bacteria. It effectively does this by stripping the layers off the Biofilm when it is adhered to a surface. You must remember that Ahh-Some is not an enzymatic cleaner so when using the product in sanitised systems, add a shock dose of the sanitiser prior to starting treatment. This ensures that as Ahh Some dislodges cells back into a planktonic condition, the sanitiser can attack and control as it was designed.

Why Ahh-Some?

Ahh Some reduces your sanitiser usage, improves your water clarity, reduces unpleasant odours and generally enhances your bathing experience.

Treatments per pack:

57gm: 3 treatments
170gm: 9 treatments
453gm: 24 treatments

DELIVERY: Ahh-Some Spa Cleaner is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Ahh-Some Spa Cleaner can be returned if unopened and in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Ahh Some Spa Cleaner (Bio Film Remover) 170g

Ahh Some Spa Cleaner is an environmentally friendly Bio Film Remover for hot tub spas. It is a formula that when applied to hot tub water, removes the build-up of biofilm (oils, bacteria, lotions, cosmetics, skin and other organic contaminants) within the pool water as well as the plumbing, jets, and shell of your Hot Tub or Spa. 

What is Bio Film? 

 Biofilm is a complex structure which adheres to surfaces that are in regular contact with water. Biofilm consist of colonies of bacteria and other micro organisms (such as yeasts, fungi and protozoa) that secrete a mucilaginous protective coating (EPS matrix) in which they are encased. They can form on solid or liquid surfaces and are typically resistant to conventional methods of disinfection.

 Why do Hot Tub Spas Get Bio Film?

 Hot tubs and spas are more difficult to maintain due to the heat of the water. Bio-Film thrives on bacteria comprising of dead skin and other components and due to the warmer temperature of water, bio-film multiplies by the day. A product such as the Ahh-Some Spa cleaner is a must for any hot tub or spa owner.

 How does Ahh-Some work?

Ahh-Some works at dislodging the Biofilm EPS matrix. Our formulation include components that soften the outer walls, allowing scrubbers and carrier salts to loosen and break-up these hard to get rid of bacteria. It effectively does this by stripping the layers off the Biofilm when it is adhered to a surface. You must remember that Ahh-Some is not an enzymatic cleaner so when using the product in sanitised systems, add a shock dose of the sanitiser prior to starting treatment. This ensures that as Ahh Some dislodges cells back into a planktonic condition, the sanitiser can attack and control as it was designed.

Why Ahh-Some?

Ahh Some reduces your sanitiser usage, improves your water clarity, reduces unpleasant odours and generally enhances your bathing experience.

Treatments per pack:

57gm: 3 treatments
170gm: 9 treatments
453gm: 24 treatments

DELIVERY: Ahh-Some Spa Cleaner is sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Ahh-Some Spa Cleaner can be returned if unopened and in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Ahh Some Spa Cleaner (Bio Film Remover)

Ahh Some Spa Cleaner is an environmentally friendly Bio Film Remover for hot tub spas. It is a formula that when applied to hot tub water, removes the build-up of biofilm (oils, bacteria, lotions, cosmetics, skin and other organic contaminants) within the pool water as well as the plumbing, jets, and shell of your Hot Tub or Spa. 

What is Bio Film? 

 Biofilm is a complex structure which adheres to surfaces that are in regular contact with water. Biofilm consist of colonies of bacteria and other micro organisms (such as yeasts, fungi and protozoa) that secrete a mucilaginous protective coating (EPS matrix) in which they are encased. They can form on solid or liquid surfaces and are typically resistant to conventional methods of disinfection.

Why do Hot Tub Spas Get Bio Film?

 Hot tubs and spas are more difficult to maintain due to the heat of the water. Bio-Film thrives on bacteria comprising of dead skin and other components and due to the warmer temperature of water, bio-film multiplies by the day. A product such as the Ahh-Some Spa cleaner is a must for any hot tub or spa owner.

How does Ahh-Some work?

Ahh-Some works at dislodging the Biofilm EPS matrix. Our formulation include components that soften the outer walls, allowing scrubbers and carrier salts to loosen and break-up these hard to get rid of bacteria. It effectively does this by stripping the layers off the Biofilm when it is adhered to a surface. You must remember that Ahh-Some is not an enzymatic cleaner so when using the product in sanitised systems, add a shock dose of the sanitiser prior to starting treatment. This ensures that as Ahh Some dislodges cells back into a planktonic condition, the sanitiser can attack and control as it was designed.

Why Ahh-Some?

Ahh Some reduces your sanitiser usage, improves your water clarity, reduces unpleasant odours and generally enhances your bathing experience.

Treatments per pack:

57gm: 3 treatments
170gm: 9 treatments
453gm: 24 treatments

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Strap Set for Swimming Pool Reel Systems(10 pack)

Pack contains: 10 Straps, 10 Poppers, 10 Adjustment Clips & 10 Screws 

 In this Strap Set kit there will be everything you require to be able to attach your Solar Cover to your Reel system.

Keeping the right distance on your straps is important in being able to being able to roll your Solar Cover up evenly. Measuring and marking where your straps would attach before fitting them allows you to understand if your straps are evenly distributed.