plug & play pool heat pumps

Hydro S ECO Heat Pump For Swimming Pools - World of Pools Save 27%

Flotide Plug & Play Heat Pump For Intex Above Ground Pools

£679.00
from £497.00
Hydro S ECO Heat Pump For Swimming Pools - World of Pools
Hydro S ECO Heat Pump For Swimming Pools - World of Pools
Hydro S ECO Heat Pump For Swimming Pools - World of Pools
Hydro S ECO Heat Pump For Swimming Pools - World of Pools
Hydro S ECO Heat Pump For Swimming Pools - World of Pools

Flotide Plug & Play Heat Pump For Intex Above Ground Pools

by Bosta
£972.00
  • Flotide Swimming Pool Heat Pump
  • Summer Season - May to August
  • Ideal Heat Pump For Summer Pools Such As Intex Or Bestway
  • Same Internal Technology As Hydropro Heat Pump
  • Frost Protection - Cuts Out Below 8°C Air Temperature
  • Same Day Dispatch & Price Match Promise

 

DELIVERY: Flotide Swimming Pool Heat Pumps are sent by specialist hauliers and take between 1-3 days for delivery.

RETURNS: Flotide Swimming Pool Heat Pumps can be returned unused and in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

.

When we receive the Hydro S Swimming Pool Heat Pump, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

PRODUCT INFO:

Flotide Swimming Pool Heat Pumps are the least expensive heat pumps in the UK market. Manufactured to the highest European standards, the Hydro S Heat Pump is suitable for above ground or in-ground pools. One big advantage these Heat Pumps have over other systems is the low water flow rate required, so these great Heat Pumps will even work on Intex and Bestway. 2025 models come with digital display and in a smart black casing

Flotide Heat Pumps are manufactured in the same factory and to the same high specification as the Hydropro. The latest model now have a digital display panel and come in a smart black casing.

The Flotide Heat Pump replaced the Hydro S Heat Pump for 2023. These new heating systems are a very cost effective way of heating your pool. As the cost of electricity has risen this type of heater has now become the most popular form of heating in the UK.

On Mainland Europe Heat Pumps have long been used to heat Pools and the Flotide Range of Heat Pumps are manufactured by a Belgium company that have long been a market leader in the industry.

The Flotide Heat Pumps are an extremely efficient form of heating for your water with a Coefficient Of Performance (C.O.P.) of up to 4.7, which means for every £1 it costs to run you get up to £4.70 of heat transferred to the pool. Every 1kw of electricity costs on average of 14p per hour which means that running an Elecro 7.5kw Electric Heater will cost £1.05 per hour to run. Running this heater for 8 hours per day will cost £8.40 per day to run. By running a Heat Pump you can reduce these running costs by up to 80%, which means an hourly running cost of only 18p. That equates to a saving of £5.76 per day or £170 per month. Over a 5-month period you could save £850.

7.5kw Electric Heater Costs £216 Per Month To Run, compare this against an 8kw ECO Heat Pump that costs just £28.80 Per Month To Run

Flotide Heat Pump Can Save You £850 Per Year

  • High Coefficient Of Performance Up To 4.8
  • Extremely Compact Unit
  • Titanium Heat Exchanger
  • Precision Temperature Control Dial
  • Low Noise Compressor & Fan
  • 2 Year Warranty

Our Opinion

The main advantages of a Flotide heat pump are the long term savings, these will only increase as the price of electricity increases. The capital outlay is higher than an electric heater but these should be recouped within one to two years. Other forms of heating such as electric and gas are quicker and less dependent upon the weather but in general a Flotide heat pump if correctly spec'd and installed will be the best choice for most owners. 

For help & advice on choosing the correct heat pump for your pool please call us on 01322 554 870

Hydro S Swimming Pool Heat Pump Sizing Dimensions

Minimum Flow Rate For Hydro S Heat Pumps

 Hydro S Heat Pump Model Minimum Flow Rate 
Flotide A5 Heat Pump 2.5 m3/h
Flotide A7 Heat Pump 2.5 m3/h
Flotide A10 Heat Pump 2.6 m3/h
Flotide A13 Heat Pump 3.5 m3/h


Flotide Swimming Pool Heat Pump - COP Curve Chart

Flotide Swimming Pool Heat Pump - Users Manual

 

The chart below is a guide to help with sizing a Hydro S Heat Pump for your above ground pool.

Easy Set     

Above Ground Pools

Hydro S Swimming Pool Heat Pumps For Easy Set Above Ground Pools

Pool Size

Cubic Metres

Hydro S Eco Heat Pump 

8ft Diameter

4.5

Hydro S 3

10ft Diameter

5.90

Hydro S 3 

12ft Diameter

7.80

Hydro S 5 

15ft Diameter

13.40

Hydro S 5

18ft Diameter

29.80

Hydro S 7

or

Hydro S 10

 

  Metal Framed     

Above Ground Pools

Hydro S Swimming Pool Heat Pumps For Metal Frame Above Ground Pools

Pool Size

Cubic Metres

Hydro S Eco Heat Pump 

10ft Diameter

6.70

Hydro S 3

12ft Diameter

8.90

Hydro S 5

15ft Diameter

17.50

Hydro S 5 

or

Hydro S 7

16ft Diameter

22.80

Hydro S 7

18ft Diameter

33.40

Hydro S 10
21ft Diameter 48.10 Hydro S 13

Hydropro P12 Swimming Pool Heat Pump

£1,245.00

Hydropro P12 Swimming Pool Heat Pump

by Bosta
£1,245.00
  • Hydropro P12 Swimming Pool Heat Pumps
  • Complete with 6m Plug and Play Cable Kit
  • In Stock For Same Day Despatch
  • Sale Prices - Cheapest Online Or We Match Price
  • Suitable For All Year Use If Sized Correctly - Call For Advice
  • 2 Year Parts & Labour Warranty

DELIVERY: Hydropro P12 Swimming Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

 

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Hydropro P12/32 heat pumps are suitable for swimming pools up to 50m3 during the main summer months, slightly less if starting in April or the beginning of May. As the Hydropro P12 Heat Pump is one of the newest ranges of Swimming Pool Heat Pumps available they are supplied with R32 Gas

Comes complete with Plug and Play Cable Kit that needs to be installed by a competent person so perfect for inground and above ground pools

As the Hydropro P14 Heat Pump will function even when the ambient air temperature is as low as 0° Celcius they can be used all year round, but with reduced C.O.P. and output. To function correctly the heat pump will need to be sized correctly. As a very rough guide, it is suggested to at least double the Ideal Size, but it is advisable if you call us on 01322 554 870 to ensure suitability.

Hydropro P12 Heat Pump - Summer Use 

Ideal Size Pool 24ft x 12ft x 4ft Deep

Maximum Pool Size 24 ft x 12ft x 5ft Deep

To see other sizes of hydropro heat pumps click here. Full Range Of Heat Pumps

For help and advice call 01322 554 870

 

Hydropro P12/32 Heat Pump Data

 

heating power input

1.95 kW

heating capacity (A27/W27)

11.5 kW

heating capacity (A15/W26)

6.5 kW

maximum volume of pool

with good insulation

50m3 /

50,000 litres

coefficient (C.O.P.)  at A27/W27

5.90

coefficient (C.O.P.)  at A15/W25

4.59

compressor

rotary

refrigerant

R32

fan quantity

1

fan power input

90

fan rotate speed

850 RPM

fan direction

Horizontal

noise level (10 metres)

43 dB (A)

water connection

50mm

nominal water flow

4.5 m/h3

dimensions (L/W/H)

100cm / 39cm / 60cm
Type C or D Breaker Size 15 amp
VBEX 10KW FULL INVERTER SWIMMING POOL HEAT PUMP FOR POOLS UP TO 50M3 SUMMER SEASON WORLDOFPOOLS

10kW VBEX Plug & Play Full Inverter Pool Heat Pump

£1,375.00
VBEX 10KW FULL INVERTER SWIMMING POOL HEAT PUMP FOR POOLS UP TO 50M3 SUMMER SEASON WORLDOFPOOLS

10kW VBEX Plug & Play Full Inverter Pool Heat Pump

by World Of Pools.com
£1,375.00
  • VBEX 10kW Full Inverter Pool Heat Pump –  Plug & Play
  • Includes standard UK 13A 3-Pin Plug for simple installation
  • Powerful and energy-efficient, perfect for pools up to 50m³
  • Ultra-quiet operation thanks to variable-speed inverter technology
  • Smart WiFi connectivity – control and monitor your pool remotely
  • Precision temperature management with full-inverter technology
  • Consumes 30-40% less energy compared to traditional fixed-speed heat pumps
  • High-quality Mitsubishi rotary compressor – durable and reliable
  • Supplied with winter cover for protection during the off-season
  • 3-Year parts & labour warranty; 5-Year coverage for compressor and heat exchanger

 

PRODUCT INFO:

VBEX Full Inverter 10kW Horizontal Pool Heat Pump

State-of-the-art full-inverter heat pump for efficient, precise pool heating – the VBEX 10kW combines advanced Mitsubishi engineering with variable-speed inverter technology, allowing output from 25% to 100% to maintain your ideal pool temperature while minimising energy use.

Designed for medium pools ranging from 35,000 to 50,000 litres. Suitable for both in-ground and above-ground pools, and compatible with liner, concrete, or fiberglass installations. Built-in Wi-Fi lets you control temperature, schedule heating times, and monitor energy use from anywhere.

Features include whisper-quiet operation, A-rated energy efficiency, titanium heat exchanger for salt and chlorine compatibility, and a protective winter cover.


Features:
  • VBEX 10kW Full Inverter – suitable for 35,000–50,000 litres (35–50 m²)
  • Whisper-quiet operation with variable-speed inverter
  • Smart WiFi Control – compatible with iOS & Android devices
  • Full-inverter temperature control – output modulation from 25–100%
  • Uses 30–40% less energy than fixed-speed heat pumps
  • Premium Mitsubishi rotary compressor for durability
  • Includes winter cover for off-season protection
  • 3-Year Parts & Labour Warranty; 5-Year warranty on compressor & heat exchanger

Estimated Heating Times

Typical springtime heating durations using a solar cover, starting from 15°C ambient temperature (late April – early May):

Pool Volume Target Temp Temperature Rise Estimated Time
40,000 L (40 m³) 26°C 11°C Approx. 51 hours (2.15 days)
40,000 L (40 m³) 29°C 14°C Approx. 70 hours (2.9 days)
50,000 L (50 m³) 26°C 11°C Approx. 64 hours (2.6 days)
50,000 L (50 m³) 29°C 14°C Approx. 81 hours (3.4 days)

Note: Actual heat-up times may vary depending on ambient temperature, wind, humidity, pool insulation, and use of a pool cover. Using a cover significantly improves heating efficiency.

F.A.Q: VBEX Full Inverter 10kW Pool Heat Pump

Q: How fast does the VBEX heat my pool?
A: Depending on pool size, starting temperature, and weather, heating typically takes between 1.5 and 3.5 days. Using a pool cover is essential.

Q: What pool sizes is it designed for?
A: Recommended for pools with surface areas 35–50 m² (35,000–50,000 litres). Optimal performance occurs in pools around 35–45 m².

Q: Can it be used in colder weather?
A: Yes. The VBEX Extended Season operates efficiently in temperatures from -5°C to +43°C, with best performance between 15–35°C.

Q: Does it use a standard plug?
A: Yes. This Plug & Play model comes with a 13A 3-Pin UK plug. Minimum recommended flow is 3–6 m³/hour.

Q: Is it compatible with salt-water pools?
A: Yes. The titanium heat exchanger ensures full compatibility with salt-chlorinated pools.

Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via iOS or Android devices.

PDF DOWNLOADS & VIDEOS:

  • Technical Datasheet – full specifications and performance details
  • Installation Manual – professional guidance for setup

DELIVERY: VBEX Full Inverter 10kW is usually dispatched within 1 working day. Delivery is via pallet or specialist courier due to size. We will contact you to schedule a delivery date once your order is placed.

RETURNS: Returns are accepted within 14 days of delivery, provided the unit is unused and in its original packaging. Refunds are issued after inspection and approval.

Sold out

Flotide A10 9.6kw Plug & Play Heat Pump For Intex Above Ground Pools

£845.00

Flotide A10 9.6kw Plug & Play Heat Pump For Intex Above Ground Pools

by H2ofun
Sold out
£845.00
  • Flotide A10 9.6kw Plug & Play Intex Swimming Pool Heat Pump
  • Plug & Play Heat Pump For Intex Above Ground Pools
  • Will Connect To All Makes Of Above Ground Pools
  • UK Plug With Inline RCD Circuit Breaker - No Electrician Costs To Hard Wire
  • Suitable For Intex Pools Up To 20ft x 12ft x 4ft Deep
  • High C.O.P. - Over £5 of Heat Out For Every £1 Of Electric In
  • 2 Year On-Site Warranty - Just Call Us To Arrange
  • Operates Above 5°C Ambient Air Temperature

DELIVERY: Flotide A10 9.6kw Plug & Play Heat Pumps for Above Ground Pools are in-stock items sent out on the same day as ordering. It is shipped on a pallet via specialist hauliers and as such the delivery will take around 4-7 working days

RETURNS: Flotide A10 9.6kw Plug & Play Heat Pumps for Above Ground Pools can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery.

Returns Address: Giraffe Enterprises Ltd, Niblock Logistics, Unit 8 Gatwick Business Park, Kennel Lane, Hookwood, Horley, RH6 0AY

When we receive the Flotide 9.6kw Plug & Play Heat Pump for Above Ground Pools, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund

PRODUCT INFO:

Flotide A10 9.6kw Plug & Play Heat Pump For Intex Above Ground Pools is designed specifically for above ground summer use pools, where hard wiring a suitably sized heat pump is not an option.

The Flotide A10 Intex Pool Heat Pump Plug & Play Swimming Pool Heat Pump, with RCD Fitted UK Plug, was exclusive to us for 2022, and our customers raved about its efficiency and ease of installation, with no need to hard wiring. Stocks will be limited in 2024, so Pre-Order Now To Avoid Disappointment.

The Flotide A10 9.6kw Plug & Play Heat Pumps For Intex Above Ground Pools is supplied with a 5m cable, 3-Pin UK Plug, along with the additional protection of an inline RCD Circuit Breaker.

Why Choose A Flotide A10 9.6kw Plug & Play Heat Pumps For Your Intex Above Ground Pool?
Unlike other Plug & Play swimming pool heat pumps the Flotide 9.6kw Plug & Play Heat Pump will work when the air is colder, even functioning when the ambient air temperature is as low as 5°C. As with all heat pumps the COP reduces the lower the air temperature, so we advise sticking to our ideal pool sizing, which takes into account the air temperature when above ground pools are used in the UK. The Flotide A10 9.6kw Plug & Play Above Ground Pool Heat Pump also comes with a comprehensive 2 Year On-Site Warranty. If, in the unlikely event, a repair is needed on the heat pump an engineer will quickly visit your garden to resolve the issue. No need to return the unit or fit the spares yourself.

CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

  • 9.6kw Plug & Play Swimming Pool Heat Pump
  • Ideally Suited For Pools Up To 30m3 - 12ft x 20ft x 4ft Deep
  • 50MM Socket Union Connections
  • High C.O.P. - Over 5
  • No Electrician Costs For Hard Wire Connection
  • 5m3 Per Hour Water Flow Rate Required
  • Can Be Connected To Intex, Bestway Or Other Above Ground Pools
  • 50mm Socket Connections - Adaptors Available For All Pipe Sizes
  • Perfect Heat Pump For Intex Pools & Bestway Pools

Heating your Intex above ground pool in the summer with a Flotide 9.6kw Plug & Play Heat Pump will mean that it can be used more often, for longer and can be used when you want to use it. With the rising costs of gas and electricity swimming pool heat pumps are now the only real "On-Demand" heating option.

Having a C.O.P. of over 5 the Flotide A10 Plug & Play 9.6kw Swimming Pool Heat Pump will cost, using Spring 2022 figures (26p/kwh), less than 65p per hour to run whilst providing £3 of heat into your pool.

Specifications:

  • Flotide 9.6kw Plug & Play Heat Pump for Above Ground Pools
  • Heating Capacity Air 26°C / Water 26-28°C - 9.6kw
  • Heating Capacity Air 15°C / Water 26-28°C - 7.1kw
  • Maximum Power Input - 1.85kw
  • Maximum Current - 10.73 Amps
  • C.O.P. - 5.19
  • Dimensions (mm) LxDxH - 913×367×718
  • Weight - 48kg
  • R32 Refrigerant Gas
  • Titanium Heat Exchanger
  • Horizontal Fan - Larger Evaporator Area

CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

Flotide A10 Heat Pump For Intex Pools Installation & User Manual PDF

Sold out

Poolstyle Mini Above Ground Pool Heat Pump - Plug & Play 8kw

£695.00

Poolstyle Mini Above Ground Pool Heat Pump - Plug & Play 8kw

by h2ofun
Sold out
£695.00
  • Poolstyle Mini Above Ground Pool Plug & Play Heat Pump
  • FAST DELIVERY
  • Works When Air Temperature Is Over 10°C
  • Heat Pump For Larger Intex, Bestway & Other Above Ground Pools
  • Suits Pools Up 35m3
  • 2 Year Full Replacement Warranty

 

DELIVERY: Poolstyle Mini's are sent out on a pallet 2 to 3 day service but all standard deliveries will be within 5 working days

RETURNS: Poolstyle Mini's can be returned if unopened and in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The 8kw Poolstyle Mini Heat Pump is perfect for pools up to 35m3, such as an Intex 18ft x 48" Metal Frame Pool. Only suitable for pool heating during the main Summer months. A Solar Cover must be used too. Buy Now For Same Day Despatch.

Poolstyle Mini Plug & Play Heat Pumps For Above Ground Pools are designed purely for the larger above ground pool market. Intex, Bestway & Summer Escapes pools are perfect for this heat pump

The minimum Flow rate from your pool pump is 2m3/hr to start the Poolstyle Mini Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

Digital Heating Control Panel - Control Heating Up To 40°C

No ByPass Required if using small Intex pumps

The Poolstyle Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible at night.

Thermotec Mini Heat Pump 4kw

Thermotec Mini Heat Pump 4kw

£450.00
Thermotec Mini Heat Pump 4kw
Thermotec Mini Heat Pump 4kw
Thermotec Mini Heat Pump 4kw

Thermotec Mini Heat Pump 4kw

by World of Pools.com
£450.00
  • Thermotec Mini Heat Pump 4kw
  • Ideal for Pool up 10cm3
  • Perfect for Intex and Bestway Style Pools
  • Works below freezing - output is greatly reduced
  • Fast Delivery

DELIVERY:

Thermotec Mini Heat Pump 4kw Above Ground Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

RETURNS: Thermotec Mini Heat Pump Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The Thermotec Mini 4 mini heat pump is designed specifically for above ground pools which will can give you extended season use so you can use it from April to October each year (providing it has properly been sized for your pool and you use a good quality Solar Cover).

The built in defrost function allows it to work in air temperatures as low as -7c ! (output of all heat pumps reduces drastically as the air temperature falls)

The Thermotec Mini is an easy to install portable Plug and Play Heat Pump, ideal for small above ground swimming pools.

Unlike other mini pool heat pumps, it includes a water flow switch and app control from your smartphone using Bluetooth

Reduce the cost of heating your pool using the Thermotec Mini heat pump rather than an electric heater.

Designed for small above ground pools up to 10m3 of water (pools with a solar cover)

A5 Flotide Heat Pump For Above Ground Swimming Pools

£487.00

A5 Flotide Heat Pump For Above Ground Swimming Pools

by Bosta
£487.00
  • Flotide Above Ground Swimming Pool Heat Pump
  • 6-8 Day Lead Time
  • Ideal Heat Pump For Summer Pools Such As Intex Or Bestway
  • 2 Year Parts & Labour Warranty
  • Same Internal Technology As Hydropro Heat Pumps
  • Functions From 5 Degrees Celsius
  • Same Day Dispatch - Price Match Promise

 

DELIVERY: Flotide ECO Swimming Pool Heat Pumps are delivered on a 2 to 3 working day delivery service by a Specialist Haulier.

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

Returns Address: Giraffe Enterprises Ltd, Niblock Logistics, Unit 8 Gatwick Business Park, Kennel Lane, Hookwood, Horley, RH6 0AY


When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..



PRODUCT INFO:

A5 Flotide Eco Heat Pumps in stock for fast delivery. These pool heaters offer outstanding value for money and are manufactured in the same factory and to the same high specification as the Hydropro and Inverter Heat Pumps. ECO Heat Pump now have digital control panel and smart black casing. As the cost of electricity has risen this type of heater has now become the most popular form of heating in the UK.

The A5 Flotide Heat Pumps are an extremely efficient form of heating for your water with a Coefficient Of Performance (C.O.P.) of up to 4.7, which means for every £1 it costs to run you get up to £4.70 of heat transferred to the pool. Every 1kw of electricity costs on average of 14p per hour which means that running an Elecro 7.5kw Electric Heater will cost £1.05 per hour to run. Running this heater for 8 hours per day will cost £8.40 per day to run. By running a Heat Pump you can reduce these running costs by up to 80%, which means an hourly running cost of only 18p. That equates to a saving of £5.76 per day or £170 per month. Over a 5-month period you could save £850.

Flotide above ground pool Heat Pump Can Save You £££ Per Year against electric, gas or oil heaters and are more reliable heat source than solar

  • High Coefficient Of Performance Up To 4.8
  • Extremely Compact Unit
  • Titanium Heat Exchanger
  • Precision Temperature Control Dial
  • Low Noise Compressor & Fan
  • 2 Year Warranty

With any heating system it is important that you have the best available solar cover on your pool, this will ensure you retain as much heat as possible

For help & advice on choosing the correct heat pump for your pool please call us on 01322 554 870 

Poolex Nano F1 5kw Full Inverter Heat Pump with Wi-Fi for Swimming Pools Sold out

Poolex Nano F1 5kw Full Inverter Heat Pump with Wi-Fi for Swimming Pools

£649.00
Poolex Nano F1 5kw Full Inverter Heat Pump with Wi-Fi for Swimming Pools
Poolex Nano F1 5kw Full Inverter Heat Pump with Wi-Fi for Swimming Pools
Poolex Nano F1 5kw Full Inverter Heat Pump with Wi-Fi for Swimming Pools
Poolex Nano F1 5kw Full Inverter Heat Pump with Wi-Fi for Swimming Pools
Poolex Nano F1 5kw Full Inverter Heat Pump with Wi-Fi for Swimming Pools

Poolex Nano F1 5kw Full Inverter Heat Pump with Wi-Fi for Swimming Pools

by POOLEX
Sold out
£649.00

  • Full Inverter Plug & Play Heat Pump

  • Super Quiet and economical

  • Maximum COP of 6 (A26/W26)

  • Automatic defrost

  • Built-in Wi-Fi 2.4GHz (Requires Poolex App)

  • Heating / Cooling / Automatic modes

  • Suitable for 32mm/38mm hoses

  • Heating range from 15-40°C

  • Works down to -7°C, suitable for extended season use (determined by pool size)

 

PRODUCT INFO:

Full Inverter Poolex Nano F1 5kw Plug & Play Heat Pump

The Poolex Nano FI heat pump features Full Inverter technology for even quieter, more economical performance, automatically optimising energy usage to keep small above-ground pools perfectly heated even on cloudy days and cooler nights*.

It remains incredibly simple to install with a pre-fitted UK plug and hose tails that suit most push-fit pool hoses, complete with built-in 2.4GHz Wi-Fi control and automatic defrost, the Nano FI provides superior, fuss-free heating while keeping your energy costs as low as possible.


  • Key features

    Full Inverter Technology

    Ultra compact design for small pools and limited spaces

    Quiet and economical

    Maximum COP of 6 (A26/W26)

    Automatic defrost

    Built-in Wi-Fi 2.4GHz (Requires Poolex App)

    Heating / Cooling / Automatic modes

    Suitable for 32mm/38mm hoses

    Heating range from 15-40°C

    Works down to -7°C, suitable for extended season use (determined by pool size)

    R32 Refrigerant

    High quality GMCC compressors

    Twisted Tech Titanium heat exchanger, chlorine and salt resistant

    Warranty (Return to Base): Heat Pump 2 years, Compressor 5 years and Titanium coil 15 years (against chemical corrosion, except for frost damage)

    Supplied with two hose connectors & clamps and 4 anti-vibration pads

 

F.A.Q: Poolex Nano F1 5kw Ultra Heat Pump

Q: How quickly will the Poolex Nano F1 heat my pool?
A: Depending on pool volume, starting temperature, and weather conditions, heating can take from 1.5 to 3.5 days. Using a pool cover can reduce heat-up time by 30-40%.

Q: What size pool is this Inverter heat pump designed for?
A: Recommended for pools no more than 30m² surface area (30,000 litres). Optimal performance is achieved in pools 15-20 m² for fastest heating.

Q: Can it be used in cooler weather?
A: Yes, the Poolex nano will work down to lower temperatures but performance as with all heat pumps will reduce the colder the weather. ideal range - ambient temperatures from -5°C to +43°C. Performance is optimal between 15–35°C.

Q: Does it run off a standard plug?
A: Yes, this is a Plug & Play model, supplied with a 3-Pin 13amp Plug. Minimum flow rate needed is 1.4–4 m³/hour.

Q: Is it suitable for salt-water pools?
A: Yes – titanium heat exchanger ensures full compatibility with salt-water pools.

Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via apps.

DELIVERY: We aim to despatch Poolex Nano F1 within 2 working days. Due to size, delivery is via pallet or specialist courier. We will contact you to agree a delivery date once the order is placed.

RETURNS: The Poolex Nano F1 may be returned in its original packaging within 14 days of delivery if unused and resalable. Refunds are processed after inspection and approval.

Poolex Nano 3.5 Ultra Compact 3.25kw Heat Pump with Wi-Fi for Swimming Pools Sold out

Poolex Nano 3.5 Ultra Compact 3.25kw Heat Pump with Wi-Fi for Swimming Pools

£399.95
Poolex Nano 3.5 Ultra Compact 3.25kw Heat Pump with Wi-Fi for Swimming Pools
Poolex Nano 3.5 Ultra Compact 3.25kw Heat Pump with Wi-Fi for Swimming Pools
Poolex Nano 3.5 Ultra Compact 3.25kw Heat Pump with Wi-Fi for Swimming Pools
Poolex Nano 3.5 Ultra Compact 3.25kw Heat Pump with Wi-Fi for Swimming Pools
Poolex Nano 3.5 Ultra Compact 3.25kw Heat Pump with Wi-Fi for Swimming Pools

Poolex Nano 3.5 Ultra Compact 3.25kw Heat Pump with Wi-Fi for Swimming Pools

by POOLEX
Sold out
£399.95

  • Ultra compact design for small pools and limited spaces

  • Quiet and economical

  • Maximum COP of 5.4 (A26/W26)

  • Automatic defrost

  • Built-in Wi-Fi 2.4GHz (Requires Poolex App)

  • Heating / Cooling / Automatic modes

  • Suitable for 32mm/38mm hoses

  • Heating range from 15-40°C

  • Works down to -7°C, suitable for extended season use (determined by pool size)

 

PRODUCT INFO:

Poolex Nano 3kw Heat Pump

Latest and most advanced heat pump for small pools the Poolex Nano 3.5 is a 3.25kw compact heat pump with automatic defrost designed to maintain your ideal water temperature. Easy to install the Poolex Nano Plug & Play heat pump is compatible with all small above ground pools up to 20m³, smaller pools will benefit more and it is essential that a solar is used to retain the heat generated.
Compact in design the Nano measures just under 40cm in height and operating at a whisper-quiet level (under 30dB) which is really low for a heat pump. The Poolex Nano 3.5 fits discreetly into small gardens or on patios. For ultimate convenience and normally only available on more expensive units the integrated Wi-Fi allows you to adjust modes and monitor performance remotely via the Poolex app. 

  • Key features

    Ultra compact design for small pools and limited spaces

    Quiet and economical

    Maximum COP of 5.4 (A26/W26)

    Automatic defrost

    Built-in Wi-Fi 2.4GHz (Requires Poolex App)

    Heating / Cooling / Automatic modes

    Suitable for 32mm/38mm hoses

    Heating range from 15-40°C

    Works down to -7°C, suitable for extended season use (determined by pool size)

    R32 Refrigerant

    High quality GMCC compressors

    Twisted Tech Titanium heat exchanger, chlorine and salt resistant

    Warranty (Return to Base): Heat Pump 2 years, Compressor 5 years and Titanium coil 15 years (against chemical corrosion, except for frost damage)

    Supplied with two hose connectors & clamps and 4 anti-vibration pads

 

F.A.Q: Poolex Nano 3.5 Ultra Heat Pump

Q: How quickly will the Poolex Nano heat my pool?
A: Depending on pool volume, starting temperature, and weather conditions, heating can take from 1.5 to 3.5 days. Using a pool cover can reduce heat-up time by 30-40%.

Q: What size pool is this heat pump designed for?
A: Recommended for pools no more than 20m² surface area (20,000 litres). Optimal performance is achieved in pools 10-15 m² for fastest heating.

Q: Can it be used in cooler weather?
A: Yes, the Poolex nano will work down to lower temperatures but performance as with all heat pumps will reduce the colder the weather. ideal range - ambient temperatures from -5°C to +43°C. Performance is optimal between 15–35°C.

Q: Does it run off a standard plug?
A: Yes, this is a Plug & Play model, supplied with a 3-Pin 13amp Plug. Minimum flow rate needed is 1.4–4 m³/hour.

Q: Is it suitable for salt-water pools?
A: Yes – titanium heat exchanger ensures full compatibility with salt-water pools.

Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via apps.

DELIVERY: We aim to despatch Poolex Nano within 2 working days. Due to size, delivery is via pallet or specialist courier. We will contact you to agree a delivery date once the order is placed.

RETURNS: The Poolex Nano may be returned in its original packaging within 14 days of delivery if unused and resalable. Refunds are processed after inspection and approval.

VBEX 10kW Plug & Play Full Inverter Swimming Pool Heat Pump

VBEX 10kW Plug & Play Full Inverter Swimming Pool Heat Pump

£1,375.00
VBEX 10kW Plug & Play Full Inverter Swimming Pool Heat Pump

VBEX 10kW Plug & Play Full Inverter Swimming Pool Heat Pump

by Fairland
£1,375.00
  • VBEX 10kW Plug & Play Full Inverter Pool Heat Pump
  • Supplied With 13amp 3-Pin Plug
  • Ideal powerful, energy-efficient up to 50m3 pools
  • Whisper-quiet operation with variable-speed inverter technology
  • Smart WiFi control – monitor and adjust temperature from anywhere
  • Intelligent full-inverter temperature control for precise heating
  • Up to 30-40% lower energy consumption than fixed-speed heat pumps
  • Premium Mitsubishi rotary compressor – reliable and long-lasting
  • Comes with winter cover for off-season protection
  • 3-Year Parts & Labour Warranty - Compressor & Heat Exchanger 5-Years Warranty

 

PRODUCT INFO:

VBEX Full Inverter 10kW Horizontal Swimming Pool Heat Pump

Advanced full-inverter heat pump delivering precise, efficient pool heating – the VBEX 10kW combines Mitsubishi engineering with cutting-edge inverter technology to provide variable output from 25% to 100%, ensuring your pool maintains the perfect temperature while keeping running costs low.

Ideal for medium to large pools with volumes from 35,000 to 50,000 litres. This heat pump is suitable for in-ground and above-ground pools, compatible with liner, concrete, and fiberglass installations. With built-in WiFi control, you can monitor and adjust your pool’s temperature remotely, schedule heating times, and track energy usage.

Key features include a whisper-quiet variable-speed compressor, A-rated energy efficiency, titanium heat exchanger for salt and chlorine compatibility, and winter cover for off-season protection.


Features:
  • VBEX 10kW Full Inverter – suitable for pools 35,000–50,000 litres (35–50m²)
  • Whisper-quiet operation with variable-speed inverter
  • Smart WiFi Control – iOS & Android compatible
  • Intelligent full-inverter temperature control – 25–100% output modulation
  • 30-40% lower energy consumption vs fixed-speed heaters
  • Premium Mitsubishi rotary compressor
  • Comes with winter cover
  • 3-Year Parts & Labour Warranty - Compressor & Heat Exchanger 5-Years Warranty

Estimated Heat-Up Times

Below are typical Spring start-up heating times, when using a solar cover, based on pool volume and target temperature, starting from 15°C ambient, which is common at the end of April and beginning of May:

Pool Volume Target Temp Temp Rise Estimated Time*
40,000 L (40 m³) 26°C 11°C 51 hours (2.15 days)
40,000 L (40 m³) 29°C 14°C 70 hours (2.9 days)
50,000 L (50 m³) 26°C 11°C 64 hours (2.6 days)
50,000 L (50 m³) 29°C 14°C 81 hours (3.4 days)

Actual times will vary based on ambient air temperature, wind, humidity, insulation, and pool cover use. Using a pool cover is essential when heating the pool.

F.A.Q: VBEX Full Inverter 10kW Pool Heat Pump

Q: How quickly will the VBEX heat my pool?
A: Depending on pool volume, starting temperature, and weather conditions, heating can take from 1.5 to 3.5 days. Using a pool cover can reduce heat-up time by 30-40%.

Q: What size pool is this heat pump designed for?
A: Recommended for pools 35–50 m² surface area (35,000–50,000 litres). Optimal performance is achieved in pools 35–45 m² for fastest heating.

Q: Can it be used in cooler weather?
A: Yes, the VBEX operates efficiently in ambient temperatures from -5°C to +43°C. Performance is optimal between 15–35°C.

Q: Does it run off a standard plug?
A: Yes, this is a Plug & Play model, supplied with a 3-Pin 13amp Plug. Minimum flow rate needed is 3–6 m³/hour.

Q: Is it suitable for salt-water pools?
A: Yes – titanium heat exchanger ensures full compatibility with salt-water pools.

Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via iOS and Android apps.

PDF DOWNLOADS & VIDEOS:

  • Technical Datasheet – complete specifications and performance data
  • Installation Manual – professional guidelines for setup

DELIVERY: We aim to despatch VBEX Full Inverter 10kW within 3 working days. Due to size, delivery is via pallet or specialist courier. We will contact you to agree a delivery date once the order is placed.

RETURNS: The VBEX Full Inverter 10kW may be returned in its original packaging within 14 days of delivery if unused and resalable. Refunds are processed after inspection and approval.