Newest Products

Relax Bromine Granules - 500g

by Relax
Sold out
£12.95
    • 500g Relax Bromine Granules For Hot Tubs
    • Relax Bromine Works Effectively At High Temperatures
    • Relax Premium Chemicals For Hot Tubs
    • Fast Low Cost Delivery
    • For Use In Hot Tub Spas

    DELIVERY: Relax 500g Bromine Granules are sent out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: Relax Bromine Granules can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    Relax Bromine Granules 500g are ideal method to sanitize your hot tub / spa. Relax bromine granules must be pre dissolved prior to being added to your spa water can be dosed straight into the spa water. 

    Instructions To Correct Low Total Bromine Levels in Swimming Pools using Relax Bromine Granules

    Calculate your pool water volume, if in doubt call us and we can advise you.

    Test your pool water for Total Bromine, if lower than 2ppm you will need to increase it. The desired levels should be between 2-5ppm

    Add Relax Bromine Granules at a rate of 3g per 1,000 litres to increase the Bromine level by 1ppm. Ideally, aim to keep the Spa Bromine levels around 4ppm or 5ppm.

    Check the Total Bromine levels regularly and aim for a reading of 4-5ppm to ensure the water is clean and safe.

      • Replacement lamps for Certikin UV System
      • From 15W to the larger 75W lamp
      • Approximate lifespan of a Certikin UV bulb is 9,000 hours (approximately 1 year)
      • The bulb should be replaced after this running time.

      DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

      RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Replacement lamps for Certikin UV System. From 15w to the larger 75W lamp

      The approximate lifespan of a Certikin UV bulb is 9,000 hours (approximately 1 year). The bulb should be replaced after this running time.

      Silensor SLS Pump Davey

      Silensor SLS Pump Davey

      by H2oFun.co.uk
      £691.20
      • Revolutionary water cooled pump
      • Super quiet pump that runs with less vibration
      • Does not need ventilation allowing greater flexibility when installing
      • Extra-Large 4.5 litre leaf basket-long intervals between cleaning
      • Automatic cut off to protect pump
      • Inbuilt Thermal Cut out eliminating the need for a separate cut off switch
      • Suitable for saltwater pools

      DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

      RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO: Top quality super quiet davey pumps that have a unique water cooled system. The SLS pumps are the same build as the SLL range but come in 1hp and 1.2hp. 

       

      Slidelock Reel with Reduction Gearbox

      Slidelock Reel with Reduction Gearbox

      by H2oFun.co.uk
      £995.00
    • Polished stainless steel reel system for small to large swimming pools
    • Perfect reel for heavy 500 micron solar covers
    • Small slidelock reel holds max width 4.3m
    • Large slidelock reel holds max width 6.1m
    • Includes 3:1 Reduction Gearbox
    •  

      DELIVERY:Swimming Pool Reels are long and as such we need to use a specific type of delivery that takes upto 3 days. We aim to send all products out on a next working day service but given this product please allow upto 5 working days

      RETURNS:This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:The Slidelock Reel system with reduction gearbox is made by Plastica, one of the leading swimming pool manufacturers in the UK. This is a premium swimming pool reel system with stainless steel end stands and anodised aluminium tubes, the reel comes with a gearbox reduction system which takes the pressure of reeling the solar cover up and makes it more easier for one person to wind the up the solar cover.

      There are two sizes of slidelock reel with gearbox reduction available - small slidelock reel for solar covers upto 4.2m wide and large slidelock reel for solar covers upto 6m wide. Max material on both Plastica reels must not exceed 75m2

      Plastic end bosses and steering wheels make the solar cover easy to wind up, but the added advantage of the gearbox reduction system makes this job so much easier

      The Plastica Slidelock Reel also has a locking device that holds the tube in place, stopping the solar cover from unwinding

      The Plastica Slidelock Reel will hold the heavier 500 micron solar covers which have now become a standard thickness in the UK for Swimming Pools. Some of the other swimming pool reel systems will struggle to hold these heavier solar covers especially for the medium to larger size pools. Again have the gearbox reduction system fitted to this swimming pool reel makes the task of winding up a heavy solar cover that much easier. There are also a range of options on the Reel system from the standard stands to options such as wall mounted

      Please call us on 01322554870 if you would like to discuss this reel system in more detail

       

      • Swimming Pool Reel Castors
      • Pack of 6 castors
      • Use with your swimming pool reel to make it easier to move
      • 4 of the castors are braked and 2 are un-braked

       

      DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

      RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Swimming Pool Reel Castors (6 pack)


      Slidelock Reel castors to be used with a Slidelock Swimming Pool Reel System. Comes as a pack of 6 (4 unbraked, 2 with brakes)

       

       

       

      Superpool Side Mount Sand Filter With MPV
      • Superpool Side Mount Filter For Sand Or Glass Media
      • Gel Coat Fibreglass tank
      • 10 Year Tank Warranty & 1 Year Valve Warranty On Residential Pools
      • 6 Way Sidemount Multiport Valve (MPV)
      • 9.5" Transparent Lid With Lid Tool
      • Ideal Replacement For Tagelus or Lacron Filters

       

      DELIVERY: We aim to send Superpool Side mount Sand Filters out on a next working day service but all standard deliveries will be within 5 working days

      RETURNS: This Superpool Side Mount Sand Filter can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Superpool Side Mount Sand Filter For Domestic Swimming Pools have a smooth finish Gel Coat Fibreglass body and are perfect replacements for old Tagelus or Lacron Side Mount Swimming Pool sand Filters

      A 9.5" Transparent Lid with "easy Remove" tool along with the high quality side mount multiport valve (MPV) allow for easy operation and  long lifespan.

      Superpool Side mount sand filters are designed to operate at flow rates between 10m3 to 32m3 depending on filter size.

      Superpool Side Mount Filter 20" requires 100kg media - pools up to 65 cubic metres

      Superpool Side Mount Filter 26" requires 150kg media - pools up to 85 cubic metres

      Superpool Side Mount Filter 30" requires 250kg media - pools up to 100 cubic metres

      Superpool Side Mount Filter 36" requires 375kg media - pools up to 130 cubic metres

       Model & Tank Size Product Code Connections Max Flow Rate Sand (kg)
      SMG500 - 20" - 516mm 88014004 1.5" 10m3/hr 100
      SMG650 - 26" - 667mm 88014005 1.5" 16.5m3/hr 150
      SMG750 - 30" - 770mm 88014063 2" 22.1m3/hr 250
      SMG900 - 36" - 920mm 88014064 2" 32m3/hr 375

       

      Superpool Top Mount Sand Filter

      Superpool Top Mount Sand Filter

      by H2oFun.co.uk
      £395.00
      • Superpool Top Mount Filter 
      • 10 Year Tank Warranty & 1 Year Valve Warranty On Residential Pools
      • 6 Way Top-mount Multiport Valve (MPV)
      • 9.5" Transparent Lid With Lid Tool

       

      DELIVERY: We aim to send Superpool Top mount Sand Filters out on a next working day service but all standard deliveries will be within 5 working days

      RETURNS: This Superpool Top Mount Sand Filter can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Superpool Top Mount Sand Filter For Domestic Swimming Pools. The sand filter has a smooth finish Gel Coat Fibreglass body. The sand filter has a 9.5" Transparent Lid with "easy Remove" tool along with the high quality top mount multiport valve (MPV) allow for easy operation and  long lifespan.

       

       Model & Tank Size Product Code Connections Max Flow Rate Sand (kg)
      TMG500 - 20" - 516mm 88014004 1.5" 10m3/hr 100
      TMG650 - 25" - 667mm 88014005 1.5" 16.5m3/hr 150
      TMG750 - 30" - 770mm 88014063 2" 22.1m3/hr 250
      TMG900 - 35" - 920mm 88014064 2" 32m3/hr 375

       

      Swimming Pool Deck Ladder

      Swimming Pool Deck Ladder

      by Plastica
      £695.00
      • Plastica Deck Ladder
      • 43mm diameter 316 grade stainless steel
      • complete with stainless steel treads and a double top tread
      • Stainless Steel sliding flange adjusts height
      • For any depth of pool

       

      DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

      RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Swimming Pool Deck Ladder 

      Plastica Domestic Pool Ladders are all manufactured from top quality 43mm diameter 316 grade stainless steel tube to conform to BS EN 13451-1. Ladder come complete with stainless steel treads and a double top tread to enable installation to BS EN 13451-2.

      • 316 grade stainless steel tube
      • 43mm diameter
      • Suitable for salt water
      • Double Stainless Steel top tread
      • Stainless Steel anti-slip treads
      • Suitable for any depth of pool
      • Stainless Steel sliding flange adjusts height

       

       

       

      Swimming Pool Felt Underlay 50m2

      Swimming Pool Felt Underlay 50m2

      by H2oFun.co.uk
      £320.00
      • Felt 4mm thick Felt
      • 50m2 Rolls - 2m Wide
      • Quick & Easy Installation Felt to Protect the Liner
      • One 25m Roll Covers 4m x 8m Pool

       

      DELIVERY: Swimming Pool Felt is sent out on a next working day service but all standard deliveries will be within 5 working days

      RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Felt Underlay, 4mm thick used to improve and protect the pool floor and protects the liner from the pool structure.

      Swimming Pool Felt is available in one size, the rolls are 25m long x 2m, giving you 50m2, Pool Felt is easy to install when fitting the new liner.

      The felt can be attached  using Thixotropic Glue Adhesive

      When estimating how much felt you need pleas ensure you add approx 10% for wastage.

       


       

       

       

       

      • Winterizing Skimmer Plug for swimming pool closing and maintenance
      • 1 1/2" & 2" Threads - one on either end
      • Protects The Skimmer From Ice Damage
      • In Stock For Immediate Delivery

       

      DELIVERY: In-stock items are sent out on a next working day service

      RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Skimmer Plug for winterising outdoor swimming pools and protecting your skimmers form ice damage. Essential winterizing product for pool closing. The winterizing Skimmer threaded plug is a quck and easy way to bung your plumbing lines. In stock for fast delivery

      Swimming Pool Solar Heating Pod

      Swimming Pool Solar Heating Pod

      by H2oFun.co.uk
      £120.00
      • Swimming Pool Solar Heating Pods
      • Heats Your Pool For Free
      • Call Us On 01322 554 870 For Advice On How Many Needed
      • Less Space Than Solar Matting
      • Great On Above Ground Pools
      • One Required For Every 5,000 Litres In Your Pool
      • 8ft & 10ft East Set Pools Need One Swimming Pool Solar Heating Pod
      • 10ft x 30" Metal Frame Pool Needs One Solar Heating Pods
      • 10ft x 36" & 12ft Metal Frame Pools Need Two Solar Heating Pods

      DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

      RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

      Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

      When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

      PRODUCT INFO:

      Swimming Pool Solar Heating Pods are an ideal solar heating system for your above ground swimming pool, especially small Above Ground Pools such as Intex Pools,Bestway Pools and similar makes of pools.

      We recommend using a maximum of two for a 10,000 litre pool, which is equivalent to a 12ft x 36" deep Metal Frame Pool

       

      • 8ft & 10ft East Set Pools Need One Swimming Pool Solar Heating Pod
      • 10ft x 30" Metal Frame Pool Needs One Solar Heating Pods
      • 10ft x 36" & 12ft Metal Frame Pools Need Two Solar Heating Pods

         

      Would You LikeTo Speak To Someone Who Uses Solar Heating On Their Own Swimming Pool? Call H2oFun.co.uk. on 01322 554 870 And Talk To Rob

       

      The Swimming Pool Solar Heating Pods heat your swimming pool water using only the strength of the Sun and you filtration pump, while saving space when compared to other swimming pool solar heating products.  

       

       

      Each Standard Swimming Pool Solar Heating Pod Kit Contains:

          Main Swimming Pool Solar Heating Pod Base & Stand

          1.25" to 1.5" Hose Reducer

          Collared Tube Adapters & Gaskets (For Larger Intex Pools)

          Hose Clamps

          1 x 1m Hose & 1 x 380mm Hose

          Side Hose Connectors

          Clear Dome

          Solar Protection Cover

       As with all swimming pool solar heaters, sizing is an estimation and can alter depending on local climate and strength of sun.

       

      Threaded Plug 1.5" For Winterising Swimming Pools

      by H2oFun.co.uk
      Sold out
      £4.95
      • 1.5" Threaded Plug / Bung for pool closing and maintenance
      • 1 1/2" Threaded fitting
      • In Stock For Immediate Delivery

       

      DELIVERY: In-stock items are sent out on a next working day service

      RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Essential winterizing product for pool closing. The winterizing Threaded plug is a quick and easy way to plug your returns or skimmer. 1.5" BSP thread fits Certikin and other fittings. In stock for fast delivery

      Vacuum Maintenance Kit - Tiled Swimming Pool
      • Swimming Pool Maintenance Kit For Tiled Swimming Pools
      • Telescopic Pole, Net, Vacuum Head & Vacuum Hose
      • 4 Sizes Available To Suit All Pools

      DELIVERY: We aim to send swimming pool maintenance kits for tiled pools out on a next working day service but all standard deliveries will be within 5 working days

      RETURNS: Swimming Pool maintenance kits for tiled pools can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Vacuum Maintenance Kit designed for Tiled swimming pools. The Flat wheeled vacuum head is especially suited for use on swimming pool tiled floors.

      The kit comprises Telescopic Pole, Vacuum Hose, Flat Vacuum Head & Shallow Skimmer Net

      4 sizes available

      9m Hose Swimming Pool Maintenance Kit For Tiled Pools

      12m Hose Swimming Pool Maintenance Kit For Tiled Pools

      15m Hose Swimming Pool Maintenance Kit For Tiled Pools

      18m Hose Swimming Pool Maintenance Kit For Tiled Pools

      • Vektro Pro Pool & Spa Cleaner With Rechargeable Battery
      • Suitable For Pools Up To 70m2
      • Attaches To Your Existing Telescopic Pole Or Can Be Handheld
      • Hi-Flow Vacuum Motor
      • On-Board Debris Catcher with Reusable, All-Purpose & Multi Layer Filter Bags
      • Easy-Grip Handle For Step, Stair & Surface Cleaning
      • No cords or leads

      DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

      RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

      PRODUCT INFO:

      Vektro Pool & Hot Tub Spa Rechargeable Cleaner

      The Vektro comes with a versatile vacuum head, the integrated spot cleaning/corner nozzle, or the easy-to-clean. 

      Rechargeable, with no leads needed when cleaning the pool.

      Suitable For Pools Up To 70m2 Or All Hot Tub Spas

         

         

        • Waterco Aquaflow XL Inverter Heat Pump 
        • 12kw @ 15 Degrees Air Temp
        • Indoor Installation Possible
        • April To October Swimming Season
        • 2 Year Parts & Labour Warranty
        • 3 Year Compressor Warranty & 10 Year Heat Exchanger Warranty
        • R32 ECO Friendly Refrigerant Gas

        DELIVERY: Waterco Aquaflow 12kw XL Inverter Swimming Pool Heat Pumps are delivered by specialist hauliers and can take between 1-3 days for delivery

        RETURNS: Waterco Aquaflow XL Inverter Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

        Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

        When we receive the Waterco Aquaflow XL Inverter Heat Pump, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

        PRODUCT INFO:

        12KW Waterco Aquaflow XL Inverter  Heat Pump are made by Waterco Europe for swimming pools in Northern Europe. This allows accurate sizing for your pool in the UK.

        Features of the Waterco XL Inverter Heat pump are, smart controls, Titanium Dual Core, Scroll Compressor, 5 years warranty, powerful Heat Transfer.

        We would recommend this heater on pools upto and including 14ft x 28ft during may to sep and 12ft x 24ft for april to october

         



        Waterco Thermoplastic Top Mount Sand Filter
        • Waterco Exotuf Thermoplastic Sand Filters
        • Made from the highest grade non-corrosive materials
        • Precision injection-moulded for superior strength
        • Ideal for pools with high-powered pumps
        • 10 year Warranty on the tank, 1 year on components

         

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

        Waterco Thermoplastic Sand Filters are made from the highest grade non-corrosive materials. Precision injection-moulded for superior strength, ideal for pools with high-powered pumps.

        Waterco Thermoplastic Sand Filters are easy to maintain. 10 Year Warranty on the tank, 1 year on components

        16" requires 40kg media, suitable for pools upto 36 cubic meters

        18" requires 75kg media, suitable for pools upto 45 cubic meters

        20" requires 90kg media, suitable for pools upto 57 cubic meters

        24" requires 130kg media, suitable for pools upto 81 cubic meters

         

         

        Winterizing Plug 1 1/2" - 2"

        by H2oFun.co.uk
        Sold out
        £9.95
        • Winterising Plug for pool closing and maintenance
        • 1 1/2" - 2" fitting
        • In Stock For Immediate Delivery

         

        DELIVERY: In-stock items are sent out on a next working day service

        RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

        Essential winterizing product for pool closing. The winterizing plug is a quck and easy way to plug your plumbing lines. In stock for fast delivery

        X-Stream Exercise Pool - Plastica Wooden Pool

        by H2oFun.co.uk
        Sold out
        £10,620.00
        • Massive Savings on X-Stream Plastica Wooden Exercise Pool Package
        • 2-3 Week Lead Time
        • Through The Wall Counter Current System - Same As Inground Pools
        • Twin Pump  Counter Current System
        • Ideal Triathlon Training Pool
        • 1-piece wooden top including "hidden fixing clips"
        • Comes With 0.75mm Plain Blue Liner + Pump & Filter
        • Internal stainless steel ladder
        • External wooden ladder
        • Felt, Foam & Liner
        • Complete Filtration system including all pipework
        • Upgrades Available
        • Installation Guide and DVD
        • Strap Brace System

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days. The X-Stream Exercise Pool is non-standard made to order, so please contact us for lead times

        RETURNS: This product is made to order and classed as a special order and cannot be returned unless there is a manufacturing defect.


        PRODUCT INFO: 

        plastica westminster wooden pool price match beat promise guarantee h2ofunThe Plastica X-Stream Exercise Wooden Pool SPECIAL OFFER PACKAGE SUMMER 2023 contains everything you need to get you started, including the structure, liner, filtration, cover & ladders.

        • Complete Standard Wooden Structure
        • X-Stream Counter Current Unit
        • Stainless Steel Ladder
        • External Wooden Ladder
        • Felt Foam & Underlay
        • 400 Blue Solar Cover
        • 30 Thou Plain Blue Liner with Mosaic Tileband
        • iFlo 500 Filter Pump Package inc Filter Media
        • Maintenance Kit


        Made by Plastica, this X-Stream Wooden Exercise Pool offers something for the whole family. In addition to providing a place for serious exercise or Triathlon Swim Training, the Plastica X-Stream Wooden Exercise Swimming Pool offers fun for the whole family. Everyone in your family, including the youngest members with proper supervision, will enjoy playing and relaxing in your X-Stream Exercise Swimming Pool.

         hydropro swimming pool hot tub spa dehumidifier air heater price match beat promise guarantee h2ofunIf you would like to ask us to price match a competitor, please click the Price Match image to send us the request.

         

        2-3 Week Lead Time On Wooden Pools in 2023


        Swimming is considered to be the most beneficial form of exercise whilst building strength and stamina and reducing stress to the body joints due to the buoyancy of the water. If you have not got the room for a full size pool in your garden then why not install a Plastica X-Stream exercise swimming pool, 3.9m long x 2.4m wide x 1.17m high, fitted with the Through The Wall " X-Stream Duo " Twin Pump Nadorself counter current system.

        This easy to install pool has been carefully designed to suit all members of the family from the strongest of swimmers to beginners. The X-Stream exercise pool provides endless swimming and can be used for all types of swimming techniques, or as an air-bubble bath for under water massage.

        This Plastica X-Stream Wooden exercise pool can be installed either above the ground, requiring minimal ground work, utilising the Strap Brace System, or in-ground providing an easy installation and aesthetically pleasing addition to your home leisure and exercise routines.


        For further information on installation, help and advice please call our customer service team on 01322 554 870

        • Xanas Counter Current Unit For Fibreglass One-Piece Pools
        • Designed For New Build Private Pools
        • Special Fittings For One Piece Prefabricated Fibreglass Pool
        • Choice Of Pumps For Flow Rates To Suit All Swimming Abilities
        • 42m3/hr & 52m3/hr 1 Phase Pumps
        • 48m3/hr, 60m3/hr & 72m3/hr 3 Phase Pumps

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

        Certikin Counter Current Systems will allow you to create the perfect fun and exercise pool, all in one. 

        With Faceplates designed for pre-formed one piece fibreglass pools, if you are building your dream pool now, then the Certikin Counter Current System is an affordable and sensible addition.

        Having the space for a lap pool, for real swimming exercise is a luxury very few of us have. The Certikin Counter Current Unit will easily transform your standard length fun pool into a pool that will allow you to swim for as far and as long as you like. Exercising will now be forever fun.

        LEAD TIMES ON CERTIKIN COUNTER CURRENT UNITS ARE NORMALLY 5 WORKING DAYS

        As one-piece pools are becoming more and more popular, the addition of the Certikin Counter Current System, using the prefabricated pools faceplate option, will allow you to truly have the pool that you wanted for your family, without the huge expense.
        Specifications:
        • Flow Qmax - 40m3/h
        • Pump Capacity - 3 HP
        • Electrical Requirements - 222v or 380v
        • Water Return Connection - 90mm
        • Water Impulsion Connection - 75mm
        • Air Tube Connection - 20mm
        • Flexible Pipe - 2 x 3.5m
        • Adjustable Jet - 41mm
        • Max Angle Adjustment Of Jet - 150
        Installation:
        Only the faceplate and housing assembly must be installed during pool installation, which means that you can spread the cost of the Certikin counter current unit over the build of the pool. The pump can be purchased later and should be installed as close as possible to the pool for maximum performance, following IEE regulations.
        The Certikin Counter Current Unit can be bought in component form as follows;
        1 - Faceplate Assembly & Housing
        2 - 3 HP Pump Kit
        3 - Control Box

        Call us on 01322 554 870 to discuss the best option for your Certikin Counter Current System.

        Certikin Mini Swimming Pool Pump 0.75hp
        Griffon PVC Glue WDF 05

        Griffon PVC Glue WDF 05

        by Griffon
        £13.95
        Bon pool Griffon WDF – 2005 PVC glue
        Quick adhesive PVC and ABS (Acrylonitrile Butadiene Styrene) glue needed. Brush in cap. For gluing soft, flexible hose, tubes, fitting & Boots both print and drucklosen pipe. Especially suitable for e.g. swimming pools, hot tubs and other areas in wet environments. Suitable for tube diameter up to 160 mm and a maximum pressure of 16 bar (PN16). ABS (Acrylonitrile Butadiene Styrene) up to 5 bar (PN5) Maximum.
        Tolerances at Columns, Max. 0.8 mm at hose Max. 0.3 mm The hardness times may vary, depending on the surface, coat primer for product volume, moisture content and ambient temperature.
        Griffon Swimming Poool / Hot Wabb PVC ABS Tube Cement 250ml WDF-05 Wet Dry & Fast

        - For inserted Pza Pipe Diameter 160mm Max. Operating Pressure. 16 BAR
        - Rigid PVC and ABS, Blauer Cement
        - Practical screw cap with attachment applicator
        - Ideal for swimming pools, hot tubs and wet applications. Do not use underwater.
        - Printing and draining - Flexible hoses
        5KG Relax Chlorine Shock Granules provides pool owners QUALITY SHOCK to dose their pools with a high level of chlorine, killing bacteria and algae. Make sure your pH level is properly balanced before adding before using this product. Perfect product for regular dosing or when pools have algae issues

        Non Return Valve Union for Swimming Pools

        by World Of Pools.com
        Sold out
        £42.95
        • Non Return Valves for Swimming Pools
        • p/p valve or 1.5"-2" valve available
        • Corrosion resistant
        • In-stock for fast delivery
        • Ideal for pool plant room installations including salt systems

         

         

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

        Non-Return valves for swimming pool pump and filtration systems allow water and debris to enter your pool or pool pump filtration (dependent upon where the valve has been fitted) but not go back out. This will allow pool water to be filtered and then returned to the swimming pool without issue. These non-return valves are easy to install to any existing pipework.

        Non-return valves or check valves can also be used with salt systems. It is important that salt treated swimming pool water does not return to your swimming pool heating system as it causes corrosion.

        P/P Non-return valve: Non Return Valve 1.5" Cone P/P Spring Loaded for swimming pool pump / filtration or where you do not want your pool water to return back to. Easy to install 1 1/2" pipe work. This non return valve is ideal for checking back pool water flow when the pump turns off.  

        1.5"-2" Non return valve: 1,5"/2" corrosion resistant swimming pool non-return valve. Note: a plastic non-return valve must be installed immediately before any chlorine dispensing units.

         

        • AG Mini Above Ground Pool Heat Pump
        • New Stock Now In For Pools Up To 18m3
        • Plug & Play Heat Pump For Intex & Above Ground Pools
        • Heats A 18m3 Pool To 30°C - Works Down To 12°C Air Temperature
        • Only 8p Per Hour To Run (0.59kw/hr)
        • 2 Year Parts Warranty

        DELIVERY: Plastica AG Mini Above Ground Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

        RETURNS: Plastica AG Mini Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

        Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

        When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

        PRODUCT INFO:

        Plastica AG Mini Heat Pump For Above Ground Pools is the newest Plug & Play heat pump for above ground pools in the UK. The AG Mini Heat Pump is especially suited to heat small to medium above ground pools up to 18m3. This makes it ideal for a 12ft x 48" Intex or Bestway Pool or a 15ft x 36" Intex or Bestway Pool

        If you are looking for a larger Plug & Play Heat Pump for your above ground pool, we can offer two other choices the Poolstyle Mini Plug & Play Heat Pump For Intex Pools or the Flotide A10 9.6kw Plug & Play Above Ground Pool Heat Pump. Complete with UK 3 Pin Plug and an RCD pack, too.

        You will need a conversion kit to connect to Intex or Bestway 1.5" Flexible Pool Hose

        These can be ordered at the same time as the AG Mini Heat Pump

        The Plastica AG Mini Heat Pump has an inline RCD Breaker connected to a UK 3-Pin plug. and weighing only 23kg allows it to be positioned anywhere in the garden.

        With a start up rate of less than 1kw and a running current of only 590w the AG Mini Heat Pump will only cost around 8p per hour to run. Less than £1 per day. When compared to a normal electric heater that costs around £5 per day, you could save enough money in the first year to pay back the initial outlay.

        Minimum Flow rate required on AG Mini Heat Pump For Above Ground Pools is 1.3m3/hr

        No ByPass Required

        A Good Quality Solar Cover Must be Used With This Heat Pump to help during the day and to preserve as much heat as possible at night. 

        The AG Mini Above Ground Pool Heat Pump is suitable for pools up to 18m3

        Below are suggestions for above ground Intex or Bestway pool sizes that the Plastica AG Mini Above Ground Pool Heat Pump is suitable for

        Metal Frame Pools

        10ft x 30 inch Metal Frame Pool
        12ft x 30 inch Metal Frame Pool
        12ft x 36 inch Metal Frame Pool
        12ft x 48 inch Metal Frame Pool
        15ft x 36 inch Metal frame Pool

         

        Easy Set Pools

        8ft x 30 inch Easy Set Pool
        10ft x 30 inch Easy Set Pool
        12ft x 30 inch easy Set Pool
        12ft x 36 inch Easy Set Pool
        15ft x 30 inch Easy Set Pool
        15ft x 48 inch easy Set Pool

         

        Swimming Pool Flexible Hose 1.25"

        Swimming Pool Flexible Hose 1.25"

        by H2oFun.co.uk
        £18.90
        • Swimming Pool Flexible Hose in BLUE
        • 1 1/4" diameter
        • Add the total number of 3m sections to your basket. This will be in one piece
        • Suitable for Intex Pools
        • Sectioned every 1m to allow you to cut to your needs
        • In-stock for fast delivery

         

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

        Swimming Pool Flexible Hose 1 1/4"


         Replacement Spare Hose For Intex, Bestway, Garden Leisure & Other Above Ground Swimming Pools. In 1.25 inch diameter. Flexible hose is sectioned every 1 metres so you can cut as per your requirements. You do not need to purchase a New Pump If your Hose Is Damaged - Buy Replacement Spare Hose instead.

        If you require a specific size, please call us and we can cut to order.

        |Choose the length you require by adding additional 3m sections into your basket. They will be sent uncut, so if you order 3 x 3m you will receive 9m of hose, in one piece.

        Note: Hose may come in blue or white

        Swimming Pool Flexible Hose 1.5"

        Swimming Pool Flexible Hose 1.5"

        by H2oFun.co.uk
        £19.95
        • Swimming Pool Flexible Hose in BLUE
        • In 1 1/2" diameter
        • Suitable for Intex Pools
        • Sectioned every 1.5m to allow you to cut to your needs
        • Add the required number of lengths to the basket. These will arrive in one piece
        • In-stock for fast delivery

         

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        Swimming Pool Flexible Hose 1 1/2"

        PRODUCT INFO:


         Replacement Spare Hose For Intex, Bestway, Garden Leisure & Other Above Ground Swimming Pools. Available In 1.5 inch diameter. Flexible hose is sectioned 1.5 metres (for 1 1/2 inch) so you can cut as per your requirements. You do not need to purchase a New Pump If your Hose Is Damaged - Buy Replacement Spare Hose instead.

         

        If you want longer lengths just add additional 3m quantity to your basket and the hose will arrive in one section, for you to cut as required

        Note: Hose may come in blue or white

        Poppers - Blue Press Fix

        Poppers - Blue Press Fix

        by Plastica
        £34.95
        • Poppers - Blue Press Fix
        • For solar cover reel systems
        • Used to attach straps to solar covers
        • Available in packs of 20

         

        DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

        Poppers (Blue Press Fix) for solar cover strap sets

        Blue Press Fix Poppers are used for swimming pool cover reels. They are to be used on fixing straps to solar covers if required. A pack of blue press fix poppers can be purchased instead of a whole new strap set, as some straps can be reused. This means you will only require a pack of male and female connectors (poppers) rather than a a brand new strap set. Our packs of blue press fix poppers come in sets of 10 or 20.  

         

         

         

        Poolstyle Mini Above Ground Pool Heat Pump - Plug & Play 6KW

        by World of Pools.com
        Sold out
        £715.00
        • Poolstyle Mini Above Ground Pool Plug & Play Heat Pump
        • FAST DELIVERY
        • Works When Air Temperature Is Over 10°C
        • Heat Pump For Larger Intex, Bestway & Other Above Ground Pools
        • Suits Pools Up 25m3
        • 2 Year Full Replacement Warranty

        DELIVERY: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

        RETURNS: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

        Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

        When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

        The Poolstyle Mini 6kw Above Ground Pool Heat Pump is for pools up to 25m3

        PRODUCT INFO:

        The 6kw Poolstyle Mini Heat Pump is perfect for pools up to 25m3, such as an Intex 15ft x 48" Metal Frame Pool. Only suitable for pool heating during the main Summer months. A Solar Cover must be used too. Buy Now For Same Day Despatch.

        Poolstyle Mini Plug & Play Heat Pumps For Above Ground Pools are designed purely for the larger above ground pool market. Intex, Bestway & Summer Escapes pools are perfect for this heat pump

        The minimum Flow rate from your pool pump is 2m3/hr to start the Poolstyle Mini Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

        Digital Heating Control Panel - Control Heating Up To 40°C

        No ByPass Required if using small Intex pumps

        The Poolstyle Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

        A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible at night.

        • Poolstyle Mini Above Ground Pool Plug & Play Heat Pump
        • FAST DELIVERY
        • Works When Air Temperature Is Over 10°C
        • Heat Pump For Larger Intex, Bestway & Other Above Ground Pools
        • Suits Pools Up 35m3
        • 2 Year Full Replacement Warranty

         

        DELIVERY: Poolstyle Mini's are sent out on a pallet 2 to 3 day service but all standard deliveries will be within 5 working days

        RETURNS: Poolstyle Mini's can be returned if unopened and in original packaging, suitable for resale, within 14 days from date of delivery.

        PRODUCT INFO:

        The 8kw Poolstyle Mini Heat Pump is perfect for pools up to 35m3, such as an Intex 18ft x 48" Metal Frame Pool. Only suitable for pool heating during the main Summer months. A Solar Cover must be used too. Buy Now For Same Day Despatch.

        Poolstyle Mini Plug & Play Heat Pumps For Above Ground Pools are designed purely for the larger above ground pool market. Intex, Bestway & Summer Escapes pools are perfect for this heat pump

        The minimum Flow rate from your pool pump is 2m3/hr to start the Poolstyle Mini Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

        Digital Heating Control Panel - Control Heating Up To 40°C

        No ByPass Required if using small Intex pumps

        The Poolstyle Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

        A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible at night.

        Aquaspeed .75hp Swimming Pool Pump

        Aquaspeed .75hp Swimming Pool Pump

        by Certikin
        £595.00
        • Aquaspeed Clear pump lid for easy inspection of the pump basket
        • 2" quick connect unions for ease of installation.
        • 316 high grade mechanical seal
        • Suitable for salt chlorinated swimming pools
        • Hydraulically efficient impeller and diffuser design Slashes Running Costs
        • UV stabilised and corrosion resistant pump body

        DELIVERY: Aquaspeed New generation Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

        PRODUCT INFO:

        Certikin Aquaspeed New Generation Swimming Pool Pumps are manufactured to the highest standards and because of this can be used in salt water pools.

        New Generation Aquaspeed are now available with a full range available in 1 phase and 3 phase this pump will be suitable for any pool you have. Manufactured with a specially designed impeller and diffuser the electricity bills are cut dramatically when compared to lesser pumps. Use a Clever-Pool Inverter to make further significant savings on running costs of upto 70%

        MODEL

        PHASE

        WEIGHT kg

        PORT SIZE

        AQUASPEED 0.50 HP

        1

        13

        2” (63MM)

        AQUASPEED 0.75 HP

        1

        14

        2” (63MM)

        AQUASPEED 1.00 HP

        1

        16

        2” (63MM)

        AQUASPEED 1.50 HP

        1

        17

        2” (63MM)

        AQUASPEED 2.00 HP

        3

        20.5

        2” (63MM)

        AQUASPEED 3.00 HP

        3

        20.5

        2” (63MM)

         

        Aquaspeed 1.50hp Swimming Pool Pump
        • Aquaspeed Clear pump lid for easy inspection of the pump basket
        • 2" quick connect unions for ease of installation.
        • 316 high grade mechanical seal
        • Suitable for salt chlorinated swimming pools
        • Hydraulically efficient impeller and diffuser design Slashes Running Costs
        • UV stabilised and corrosion resistant pump body

        DELIVERY: Aquaspeed New generation Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

        PRODUCT INFO:

        Certikin Aquaspeed New Generation Swimming Pool Pumps are manufactured to the highest standards and because of this can be used in salt water pools.

        New Generation Aquaspeed are now available with a full range available in 1 phase and 3 phase this pump will be suitable for any pool you have. Manufactured with a specially designed impeller and diffuser the electricity bills are cut dramatically when compared to lesser pumps. Use a Clever-Pool Inverter to make further significant savings on running costs of upto 70%

        MODEL

        PHASE

        WEIGHT kg

        PORT SIZE

        AQUASPEED 0.50 HP

        1

        13

        2” (63MM)

        AQUASPEED 0.75 HP

        1

        14

        2” (63MM)

        AQUASPEED 1.00 HP

        1

        16

        2” (63MM)

        AQUASPEED 1.50 HP

        1

        17

        2” (63MM)

        AQUASPEED 2.00 HP

        3

        20.5

        2” (63MM)

        AQUASPEED 3.00 HP

        3

        20.5

        2” (63MM)

         

        Aquaspeed 1hp Swimming Pool Pump

        Aquaspeed 1hp Swimming Pool Pump

        by Certikin
        £625.00
        • Aquaspeed Clear pump lid for easy inspection of the pump basket
        • 2" quick connect unions for ease of installation.
        • 316 high grade mechanical seal
        • Suitable for salt chlorinated swimming pools
        • Hydraulically efficient impeller and diffuser design Slashes Running Costs
        • UV stabilised and corrosion resistant pump body

        DELIVERY: Aquaspeed New generation Pumps are sent out on a next working day service but all standard deliveries will be within 5 working days

        RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

        PRODUCT INFO:

        Certikin Aquaspeed New Generation Swimming Pool Pumps are manufactured to the highest standards and because of this can be used in salt water pools.

        New Generation Aquaspeed are now available with a full range available in 1 phase and 3 phase this pump will be suitable for any pool you have. Manufactured with a specially designed impeller and diffuser the electricity bills are cut dramatically when compared to lesser pumps. Use a Clever-Pool Inverter to make further significant savings on running costs of upto 70%

        MODEL

        PHASE

        WEIGHT kg

        PORT SIZE

        AQUASPEED 0.50 HP

        1

        13

        2” (63MM)

        AQUASPEED 0.75 HP

        1

        14

        2” (63MM)

        AQUASPEED 1.00 HP

        1

        16

        2” (63MM)

        AQUASPEED 1.50 HP

        1

        17

        2” (63MM)

        AQUASPEED 2.00 HP

        3

        20.5

        2” (63MM)

        AQUASPEED 3.00 HP

        3

        20.5

        2” (63MM)