DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

30ft x 15ft Oval Steel Walled Swimming Pool with 42" Wall Height Making It Ideal For A Family With A Young Family. Affordable & Fitted With Same Filtration Equipment Included In Our Doughboy Pool Packages

The 30ft x 15ft Oval 42 Inch deep Steel walled pool package is the perfect permanent pool to start off with as the 42" wall depth gives you a 3ft (36") water depth which is more suitable for younger families.

When your young children grow up and can safely stand in deeper pools, then you can simply take this 30ft x 15ft Oval 42" Steel Wall Pool down, sell it on or give it to a friend and install a deeper pool.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Replacement Doughboy Liners for both the Regent and Premier. High quality liners with unbeatable warranty on the seam. In stock for quick delivery

Doughboy Replacement Liners are all plain blue overlapping liners which are stretched into place, this can be a difficult task to do so please follow the instructions below.

1. Check and Double Check: It’s is vital to check that all levels and measurements are correct before positioning your Doughboy Liner. The cove is a vital structural element that prevents water pressure from forcing the liner out under the bottom rail. So please be sure that cove is installed correctly by manufactures guidelines.
2. Seam Positioning: Check the pool floor (area inside the walls) for levelness. Fill in all depressions and remove any stones or sharp object from floor. Place the Doughboy liner on the top of top rail, the liner should have overhanging the outside wall by 12” inches. Hold end and unroll liner down middle of pool as you would carpet, do not place liner seam over skimmer or return fitting openings.
3. Install Liner: Work in both directions from the point where is already overhanging, unfold Doughboy liner, drape over the top rail and down the sides approximately 24” inches. The liner should be barely above the pool floor in the centre only. Remember that the centre seam or centre of the Doughboy Plain Blue liner should be inside the pool about 12” inches below the top rail. Correct any bunching or pleating conditions in the liner wall. Inspect the liner for open seams if any found return to dealer for prompt replacement of liner.
4. Fill Pool: With the Doughboy Plain Blue liner in position, hold in place by attaching heavy duty clips over folded cardboard on the underside of each top rail. Carefully cover the end of the garden hose with a sock and tape securely, once this is done place hose inside the pool and start filling. As pool fills the liner will stretch as the water begins to cover the bottom. At this point check the walls for EXTREME tautness, release clips if need be but be sure not to release too much slack as this will cause creases. When releasing the clips you will also need to keep in mind the clips will need to be loosened evenly for whole circumference of the pool (Doughboy advise very little amounts at a time). Once the water reaches past the cove the tension should ease off dramatically and you should have no wrinkles on the floor. Creases in the wall can be removed by re-tauting the Doughboy Plain Blue liner over the wall,
5. Procedure to attached liner: With the help of two or three people, raise and hold the Doughboy Plain Blue liner up from any three top rail sections. Remove some of the top rail completely and stretch the Doughboy liner over metal wall as tight as possible, then re-erect the top rail with the liner in position and repeat the procedure all the way round the pool (Remembering only taking 2-3 sections off at one time) Once this is completed and the water is at correct level then the water can be turned off and cuts to the liner can be made.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Replacement Doughboy Liners for both the Regent and Premier. High quality liners with unbeatable warranty on the seam. In stock for quick delivery

These Doughboy Replacement Liners are all patterned overlap liners which are stretched into place, this can be a difficult task to do so please follow the instructions below.

1. Check and Double Check: It’s is vital to check that all levels and measurements are correct before positioning your Doughboy Liner. The cove is a vital structural element that prevents water pressure from forcing the liner out under the bottom rail. So please be sure that cove is installed correctly by manufactures guidelines.
2. Seam Positioning: Check the pool floor (area inside the walls) for levelness. Fill in all depressions and remove any stones or sharp object from floor. Place the Doughboy liner on the top of top rail, the liner should have overhanging the outside wall by 12” inches. Hold end and unroll liner down middle of pool as you would carpet, do not place liner seam over skimmer or return fitting openings.
3. Install Liner: Work in both directions from the point where is already overhanging, unfold Doughboy liner, drape over the top rail and down the sides approximately 24” inches. The liner should be barely above the pool floor in the centre only. Remember that the centre seam or centre of the Doughboy Patterned liner should be inside the pool about 12” inches below the top rail. Correct any bunching or pleating conditions in the liner wall. Inspect the liner for open seams if any found return to dealer for prompt replacement of liner.
4. Fill Pool: With the Doughboy Patterned liner in position, hold in place by attaching heavy duty clips over folded cardboard on the underside of each top rail. Carefully cover the end of the garden hose with a sock and tape securely, once this is done place hose inside the pool and start filling. As pool fills the liner will stretch as the water begins to cover the bottom. At this point check the walls for EXTREME tautness, release clips if need be but be sure not to release too much slack as this will cause creases. When releasing the clips you will also need to keep in mind the clips will need to be loosened evenly for whole circumference of the pool (Doughboy advise very little amounts at a time). Once the water reaches past the cove the tension should ease off dramatically and you should have no wrinkles on the floor. Creases in the wall can be removed by re-tauting the Doughboy Patterned liner over the wall,
5. Procedure to attached liner: With the help of two or three people, raise and hold the Doughboy Patterned liner up from any three top rail sections. Remove some of the top rail completely and stretch the Doughboy liner over metal wall as tight as possible, then re-erect the top rail with the liner in position and repeat the procedure all the way round the pool (Remembering only taking 2-3 sections off at one time) Once this is completed and the water is at correct level then the water can be turned off and cuts to the liner can be made.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The stainless steel swimming pool heat exchanger is plumbed in to both your domestic boiler and your swimming pool pipework allowing the spare heat that has already been produced by your household system to be utilised in heating your swimming pool, cheaply and effectively.

• Ideal for installation on a household heating system
• Stainless steel
• Built in 0.5'' probe pocket

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Water Tubes are used to secure the debris cover without the use of fixings. There are three types of water tubes available, the blue tubes come in 3ft 6" tubes and 7ft 6" tues and there is a Black double bag which is the same size in terms of length and width as the Blue 7ft 6"

You need sufficent water tube all around the permiter of the pool to weigh down the debris cover. If you require advice on this product please do not hesitate to email or call us.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS:

This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Heatseeker Swimming Pool Heat Pumps are one of the best performing heat pumps on the market and offer an exceptionally efficient and cost effective means of heating pool water. The HeatSeeker Heat Pump simply extracts heat from the surrounding air and transfers it to pool water. In stock for fast delivery

The Heatseeker is designed with Longevity in mind. The ports are all internal thread, removing any chance of the heat exchanger being damaged by accidently knocking the returns, a simple best practice solution. This is not usually found on most heat pumps as it involves a lot more design and engineering, but it will mean your Rio will normally last a lot longer than other makes.

A reverse cycle defrost, using the super-heated gas rather than the pool water to defrost the evaporator fins, allows the Heatseeker to effectively work down to very low temperatures. This is the best method for defrosting any heat pump.

One of the options we get asked for most is a Soft-Start. This allows the Heat Pump's compressor to build up its electrical charge slowly rather than kicking in with a surge of power as other heat pumps do. This option is best on the larger heat pumps such as 17kw & 21kw. No more blown fuses.

Call for Best Price, fast delivery and free bypass kit on these Heatseeker Heat Pumps

Heatseeker Swimming Pool Heat Pumps are one of the best performing heat pumps in the market. The output of the Heatseeker Heat Pumps is based on 15 degrees air temp which is a realistic tempreture for the UK, other models including the Hydropro range calculate their output at 27 degrees which means their actual output at 15 degrees is dramatically less, as an example the Hydropro 18 and heatseeker 12.5 produce approx the same heat at 15 degrees. The Heatseeker Heat Pump offers an exceptionally efficient and cost effective means of heating pool water. Household refrigerators and air conditioning systems have utilised this technology for decades. The HeatSeeker Heat Pump simply extracts heat from the surrounding air and transfers it to pool water.

An integral fan draws air across an evaporator, heat from the airflow is captured by the refrigerant flowing through the evaporator. Having extracted the heat from the air, the refrigerant is condensed and its heat then transferred to the passing pool water via the HeatSeekers heat exchanger.

Heat pump technology is reliable, environmentally friendly and extremely cost effective.

Larger Heatseeker Heat Pumps feature the soft start motor controller which is housed discreetly behind the front panel

Features :

• Proven reliability
• Remote digital exchanger
• Titanium heat exchanger
• High efficiency compressor
• Self diagnostic
• Fully programmable
• Quick and easy installation
• Strong steel casing
• Very quiet operation
• Reverse cycle defrost
• Soft start model typically lowers startup amps by at least 50%

If you would like help choosing which Heatseeker Heat Pump is most suitable for your swimming pool please call us on 01322 554 870. We will be more than happy to help.

DELIVERY: Easy Drain Plus is sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Easy Drain Plus can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

3m Length Of Easy Drain Plus Swimming Pool Drainage Pipe

Easy drain plus is a rigid PVC drainage system ideal for use on your indoor pool, the drainage channels will get rid of that unwanted water that sittings around your pool caused by splashing. Available in 3m lengths and a range of different fittings to suit every pool.

Easy Drain Plus is an easy but effective way of draining excess water from around your swimming pool, spa or shower area. It comes in 3 metre lengths and can be cut to any size sections, making it very easy to install and adaptable to most applications. Each section has a removable lid, so when it comes to cleaning and maintenance work around the pool area it is very straight forward.

Easy Drain Plus is Manufactured from high grade white PVC and the lid section is also available as a spare part too. This allows you to refurbish the swimming pool surround in the future cheaply and quickly, by simply replacing the top section only.

Easy Drain is very adaptable as it can take standard 1.5” pipe work and 50mm pipe work and is suitable for domestic application only.  

All Easy Drain Plus are made to the standard coping height of 68mm and each 3 metre Length requires three nailing clips

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

End Caps for Easy Drain Plus Swimming Pool Drainage Channel

Easy Drain Plus is an easy, but effective way of draining excess water from around your swimming pool, spa or shower area. Easy to install and designed to fit 1.5" swimming pool pipe

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Couplers for Easy Drain Plus Swimming Pool Drainage Pipe.

Easy Drain Plus is an easy but effective way of draining excess water from around your swimming pool, spa or shower area. Easy to install

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Nailing Clips For Easy Drain Plus, 3 required per 3m length.

Easy Drain Plus is an easy but effective way of draining excess water from around your swimming pool, spa or shower area. Easy to install

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

4 Way Cross Piece For Easy Drain Plus

Easy drain plus is a rigid PVC drainage system ideal for use on your indoor pool, the drainage channels will get rid of that unwanted water that sits around your pool caused by splashing. 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

90 Degree Angle Piece For Easy Drain Plus

Easy drain plus is a rigid PVC drainage system ideal for use on your indoor pool, the drainage channels will get rid of that unwanted water that sits around your pool caused by splashing. 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

135 Degree Angle For Easy Drain Plus

Easy drain plus is a rigid PVC drainage system ideal for use on your indoor pool, the drainage channels will get rid of that unwanted water that sittings around your pool caused by splashing. Available in 3m lengths and a range of different fittings to suit every pool.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

800g container. Dosage: one tablet per 2 tablets per 60 cubic metres, 2 tablets per 60 cubic meters if water is very cloudy

Contains Aluminium Sulphate
CHIP info: R36- Irritating to eyes and respiratory system

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

PRODUCT INFO:

This electronic 3-way valve controls the warm water supply into your pool via two sensors. One is built into the housing of the valve and the other one is placed into the pool connected via a 10 metre cable.

The display will show the existing pool water temperature and you can manually set the desired temperature. Pool water will automatically be directed through the heater to gain heat and as soon as the temperature has been reached, the valve will switch over and send the water from the pump directly into the pool.

Normally added to swimming pool solar heating installations

Standard 1 1/2" Fittings