DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

30ft x 15ft Oval Steel Walled Swimming Pool with 42" Wall Height Making It Ideal For A Family With A Young Family. Affordable & Fitted With Same Filtration Equipment Included In Our Doughboy Pool Packages

The 30ft x 15ft Oval 42 Inch deep Steel walled pool package is the perfect permanent pool to start off with as the 42" wall depth gives you a 3ft (36") water depth which is more suitable for younger families.

When your young children grow up and can safely stand in deeper pools, then you can simply take this 30ft x 15ft Oval 42" Steel Wall Pool down, sell it on or give it to a friend and install a deeper pool.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Replacement Doughboy Liners for both the Regent and Premier. High quality liners with unbeatable warranty on the seam. In stock for quick delivery

Doughboy Replacement Liners are all plain blue overlapping liners which are stretched into place, this can be a difficult task to do so please follow the instructions below.

1. Check and Double Check: It’s is vital to check that all levels and measurements are correct before positioning your Doughboy Liner. The cove is a vital structural element that prevents water pressure from forcing the liner out under the bottom rail. So please be sure that cove is installed correctly by manufactures guidelines.
2. Seam Positioning: Check the pool floor (area inside the walls) for levelness. Fill in all depressions and remove any stones or sharp object from floor. Place the Doughboy liner on the top of top rail, the liner should have overhanging the outside wall by 12” inches. Hold end and unroll liner down middle of pool as you would carpet, do not place liner seam over skimmer or return fitting openings.
3. Install Liner: Work in both directions from the point where is already overhanging, unfold Doughboy liner, drape over the top rail and down the sides approximately 24” inches. The liner should be barely above the pool floor in the centre only. Remember that the centre seam or centre of the Doughboy Plain Blue liner should be inside the pool about 12” inches below the top rail. Correct any bunching or pleating conditions in the liner wall. Inspect the liner for open seams if any found return to dealer for prompt replacement of liner.
4. Fill Pool: With the Doughboy Plain Blue liner in position, hold in place by attaching heavy duty clips over folded cardboard on the underside of each top rail. Carefully cover the end of the garden hose with a sock and tape securely, once this is done place hose inside the pool and start filling. As pool fills the liner will stretch as the water begins to cover the bottom. At this point check the walls for EXTREME tautness, release clips if need be but be sure not to release too much slack as this will cause creases. When releasing the clips you will also need to keep in mind the clips will need to be loosened evenly for whole circumference of the pool (Doughboy advise very little amounts at a time). Once the water reaches past the cove the tension should ease off dramatically and you should have no wrinkles on the floor. Creases in the wall can be removed by re-tauting the Doughboy Plain Blue liner over the wall,
5. Procedure to attached liner: With the help of two or three people, raise and hold the Doughboy Plain Blue liner up from any three top rail sections. Remove some of the top rail completely and stretch the Doughboy liner over metal wall as tight as possible, then re-erect the top rail with the liner in position and repeat the procedure all the way round the pool (Remembering only taking 2-3 sections off at one time) Once this is completed and the water is at correct level then the water can be turned off and cuts to the liner can be made.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Replacement Doughboy Liners for both the Regent and Premier. High quality liners with unbeatable warranty on the seam. In stock for quick delivery

These Doughboy Replacement Liners are all patterned overlap liners which are stretched into place, this can be a difficult task to do so please follow the instructions below.

1. Check and Double Check: It’s is vital to check that all levels and measurements are correct before positioning your Doughboy Liner. The cove is a vital structural element that prevents water pressure from forcing the liner out under the bottom rail. So please be sure that cove is installed correctly by manufactures guidelines.
2. Seam Positioning: Check the pool floor (area inside the walls) for levelness. Fill in all depressions and remove any stones or sharp object from floor. Place the Doughboy liner on the top of top rail, the liner should have overhanging the outside wall by 12” inches. Hold end and unroll liner down middle of pool as you would carpet, do not place liner seam over skimmer or return fitting openings.
3. Install Liner: Work in both directions from the point where is already overhanging, unfold Doughboy liner, drape over the top rail and down the sides approximately 24” inches. The liner should be barely above the pool floor in the centre only. Remember that the centre seam or centre of the Doughboy Patterned liner should be inside the pool about 12” inches below the top rail. Correct any bunching or pleating conditions in the liner wall. Inspect the liner for open seams if any found return to dealer for prompt replacement of liner.
4. Fill Pool: With the Doughboy Patterned liner in position, hold in place by attaching heavy duty clips over folded cardboard on the underside of each top rail. Carefully cover the end of the garden hose with a sock and tape securely, once this is done place hose inside the pool and start filling. As pool fills the liner will stretch as the water begins to cover the bottom. At this point check the walls for EXTREME tautness, release clips if need be but be sure not to release too much slack as this will cause creases. When releasing the clips you will also need to keep in mind the clips will need to be loosened evenly for whole circumference of the pool (Doughboy advise very little amounts at a time). Once the water reaches past the cove the tension should ease off dramatically and you should have no wrinkles on the floor. Creases in the wall can be removed by re-tauting the Doughboy Patterned liner over the wall,
5. Procedure to attached liner: With the help of two or three people, raise and hold the Doughboy Patterned liner up from any three top rail sections. Remove some of the top rail completely and stretch the Doughboy liner over metal wall as tight as possible, then re-erect the top rail with the liner in position and repeat the procedure all the way round the pool (Remembering only taking 2-3 sections off at one time) Once this is completed and the water is at correct level then the water can be turned off and cuts to the liner can be made.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The stainless steel swimming pool heat exchanger is plumbed in to both your domestic boiler and your swimming pool pipework allowing the spare heat that has already been produced by your household system to be utilised in heating your swimming pool, cheaply and effectively.

• Ideal for installation on a household heating system
• Stainless steel
• Built in 0.5'' probe pocket

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Water Tubes are used to secure the debris cover without the use of fixings. There are three types of water tubes available, the blue tubes come in 3ft 6" tubes and 7ft 6" tues and there is a Black double bag which is the same size in terms of length and width as the Blue 7ft 6"

You need sufficent water tube all around the permiter of the pool to weigh down the debris cover. If you require advice on this product please do not hesitate to email or call us.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS:

This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Heatseeker Swimming Pool Heat Pumps are one of the best performing heat pumps on the market and offer an exceptionally efficient and cost effective means of heating pool water. The HeatSeeker Heat Pump simply extracts heat from the surrounding air and transfers it to pool water. In stock for fast delivery

The Heatseeker is designed with Longevity in mind. The ports are all internal thread, removing any chance of the heat exchanger being damaged by accidently knocking the returns, a simple best practice solution. This is not usually found on most heat pumps as it involves a lot more design and engineering, but it will mean your Rio will normally last a lot longer than other makes.

A reverse cycle defrost, using the super-heated gas rather than the pool water to defrost the evaporator fins, allows the Heatseeker to effectively work down to very low temperatures. This is the best method for defrosting any heat pump.

One of the options we get asked for most is a Soft-Start. This allows the Heat Pump's compressor to build up its electrical charge slowly rather than kicking in with a surge of power as other heat pumps do. This option is best on the larger heat pumps such as 17kw & 21kw. No more blown fuses.

Call for Best Price, fast delivery and free bypass kit on these Heatseeker Heat Pumps

Heatseeker Swimming Pool Heat Pumps are one of the best performing heat pumps in the market. The output of the Heatseeker Heat Pumps is based on 15 degrees air temp which is a realistic tempreture for the UK, other models including the Hydropro range calculate their output at 27 degrees which means their actual output at 15 degrees is dramatically less, as an example the Hydropro 18 and heatseeker 12.5 produce approx the same heat at 15 degrees. The Heatseeker Heat Pump offers an exceptionally efficient and cost effective means of heating pool water. Household refrigerators and air conditioning systems have utilised this technology for decades. The HeatSeeker Heat Pump simply extracts heat from the surrounding air and transfers it to pool water.

An integral fan draws air across an evaporator, heat from the airflow is captured by the refrigerant flowing through the evaporator. Having extracted the heat from the air, the refrigerant is condensed and its heat then transferred to the passing pool water via the HeatSeekers heat exchanger.

Heat pump technology is reliable, environmentally friendly and extremely cost effective.

Larger Heatseeker Heat Pumps feature the soft start motor controller which is housed discreetly behind the front panel

Features :

• Proven reliability
• Remote digital exchanger
• Titanium heat exchanger
• High efficiency compressor
• Self diagnostic
• Fully programmable
• Quick and easy installation
• Strong steel casing
• Very quiet operation
• Reverse cycle defrost
• Soft start model typically lowers startup amps by at least 50%

If you would like help choosing which Heatseeker Heat Pump is most suitable for your swimming pool please call us on 01322 554 870. We will be more than happy to help.

DELIVERY: Easy Drain Plus is sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Easy Drain Plus can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

3m Length Of Easy Drain Plus Swimming Pool Drainage Pipe

Easy drain plus is a rigid PVC drainage system ideal for use on your indoor pool, the drainage channels will get rid of that unwanted water that sittings around your pool caused by splashing. Available in 3m lengths and a range of different fittings to suit every pool.

Easy Drain Plus is an easy but effective way of draining excess water from around your swimming pool, spa or shower area. It comes in 3 metre lengths and can be cut to any size sections, making it very easy to install and adaptable to most applications. Each section has a removable lid, so when it comes to cleaning and maintenance work around the pool area it is very straight forward.

Easy Drain Plus is Manufactured from high grade white PVC and the lid section is also available as a spare part too. This allows you to refurbish the swimming pool surround in the future cheaply and quickly, by simply replacing the top section only.

Easy Drain is very adaptable as it can take standard 1.5” pipe work and 50mm pipe work and is suitable for domestic application only.  

All Easy Drain Plus are made to the standard coping height of 68mm and each 3 metre Length requires three nailing clips

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

End Caps for Easy Drain Plus Swimming Pool Drainage Channel

Easy Drain Plus is an easy, but effective way of draining excess water from around your swimming pool, spa or shower area. Easy to install and designed to fit 1.5" swimming pool pipe

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Couplers for Easy Drain Plus Swimming Pool Drainage Pipe.

Easy Drain Plus is an easy but effective way of draining excess water from around your swimming pool, spa or shower area. Easy to install

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Nailing Clips For Easy Drain Plus, 3 required per 3m length.

Easy Drain Plus is an easy but effective way of draining excess water from around your swimming pool, spa or shower area. Easy to install

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

4 Way Cross Piece For Easy Drain Plus

Easy drain plus is a rigid PVC drainage system ideal for use on your indoor pool, the drainage channels will get rid of that unwanted water that sits around your pool caused by splashing. 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

90 Degree Angle Piece For Easy Drain Plus

Easy drain plus is a rigid PVC drainage system ideal for use on your indoor pool, the drainage channels will get rid of that unwanted water that sits around your pool caused by splashing. 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

135 Degree Angle For Easy Drain Plus

Easy drain plus is a rigid PVC drainage system ideal for use on your indoor pool, the drainage channels will get rid of that unwanted water that sittings around your pool caused by splashing. Available in 3m lengths and a range of different fittings to suit every pool.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

800g container. Dosage: one tablet per 2 tablets per 60 cubic metres, 2 tablets per 60 cubic meters if water is very cloudy

Contains Aluminium Sulphate
CHIP info: R36- Irritating to eyes and respiratory system

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

PRODUCT INFO:

This electronic 3-way valve controls the warm water supply into your pool via two sensors. One is built into the housing of the valve and the other one is placed into the pool connected via a 10 metre cable.

The display will show the existing pool water temperature and you can manually set the desired temperature. Pool water will automatically be directed through the heater to gain heat and as soon as the temperature has been reached, the valve will switch over and send the water from the pump directly into the pool.

Normally added to swimming pool solar heating installations

Standard 1 1/2" Fittings

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Above ground deluxe tarpaulin swimming pool debris covers Stop not only debris but will stop algae growth too. No more green pools. The Tarpaulin materials blocks all debris and light. This swimming pool debris cover can be used during Summer or Winter. The cover comes complete with elasticated tie-downs and wall clips

This is a made to order cover, standard sizes have been added but we can make this to fit all size above ground pools, please email or call for more details

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Wooden Pool deluxe tarpaulin swimming pool debris cover. The Tarpaulin materials blocks all debris and light. This swimming pool debris cover can be used during Summer or Winter. the cover comes complete with elasticated tie-downs and wall clips

This is a made to order cover, standard sizes are included but we can make this to fit all size wooden pools, please email or call for more details

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The poolsaver manual safety cover is made from UV stabalised PVC coated Polyester. The reinforced underside reduces wear from coping stones. The safety Cover is coated with PVC to improve resistance against wear & tear, weathering and chemical damage you can be sure that your Bar Safety Cover will last for many, many years.

Safety is not something you can ignore around a swimming pool, but neither are budget restraints. This safety cover is compliant to the stringent French Safety Standards AFNOR NF P 90-308, that not only provides you piece of mind but will also function as a Summer & Winter Cover too.

The Poolsaver manual safety cover comes in Blue, Beige, Grey and Green and can be made to a specific size if required. Manual winder is supplied as standard but an optional motorized winding system is also available

Accessories & Optional Extras

Additional Hand Cranks  £220 each

Optional Rolltrot Motorised Crank £1175

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO: Lifehook for domestic or commercial swimming pools. A specific aluminium pole must be used with the lifehook, a standard pool maintenance telescopic pole is not suitable.

Swimming pool safety is becoming more important for pool owners in the UK. Tough laws requiring safety around pools is adopted in many countries. This piece of Lifesaving equipment will help add more safety to your pool enviroment

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Relax Winterlong is a concentrated copper based algicide that is made to treat swimming pools during the winter months. Correctly closing down you pool will result in clean water to begin the new season with. The 1lt bottle of copper based Winterlong from Relax will treat 14,500 liters. Please make sure you balance the pH levels correctly before adding the Shock and Relax Concentrate Winterlong

Small Pools up to 15 cubic metres 1 Litre Relax Concentrated Winterlong Copper Algicide

Medium Pools up to 45 cubic metres 3 x 1Ltr Relax Concentrated Winterlong Copper Algicide

Large Pools up to 90 cubic metres 6 x 1 Litres Relax Concentrated Winterlong Copper Algicide

DELIVERY: In-stock items are sent out on a next working day service

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

1.5" 90 degree White Swimming Pool PVC fitting in stock for fast delivery

Designed to withstand 16 Bar of pressure this white PVC imperial glue socket 90° Elbow is ideal for refurbishment or new installation of swimming pool PVC pipework. Cost effective, but of the highest quality, it will receive 1.5" swimming pool pipe for a permanent, watertight solvent adhesive weld.

DELIVERY: In-stock items are sent out on a next working day service

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Essential winterizing product for pool closing. The winterizing plug is a quck and easy way to plug your plumbing lines. In stock for fast delivery

Fi-Clor Spa Bromine Granules can be used in conjunction with bromine tablets to boost the bromine levels or as the sole sanatiser. The granules are fast dissolving so can be added straight into the spa water. Fi-Clor Bromine Granules contain 1-bromo 3-chloro 5.5 Demethyl Hydantoin that will produce Hypobromous Acid which will sanitise the hot tub or pool. When testing for it use a tester that will show Total Bromine

Fi-Clor Bromine Granules Guide

Test your Spa water for Total Bromine, if lower than 2ppm you will need to increase it. The desired levels should be between 4-5ppm

Add Fi-Clor Bromine Granules at a rate of 3g per 1,000 litres to increase the Bromine level by 1ppm. Check the Total Bromine levels regularly especially after using the hot tub / spa. Fi-Clor Non Chlorine Shock or Fi-Clor Spa Oxy-Brite Sachets should be used as a regular shock treatment

We hold Fi-Clor Bromine Granules in stock for fast next working day delivery

DELIVERY: Side Mount Sand Filters will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Side Mount Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Mega S Series Side Mount Sand Filter

Great value, Side Mount Sand filter from Mega Group. Mega is an established European supplier specialising in quality pool products. Clean, sparkling water is a very important swimming pool feature, and can be achieved using a mega top mount sand filter. 6 way multi port valve and gauge is included.

The Mega S Series Side Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Mega Side mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

18" requires 50kg media, suitable for pools upto 40 cubic meters

21" requires 85kg media, suitable for pools upto 60 cubic meters

26" requires 155kg media, suitable for pools upto 80 cubic meters

28" requires 215kg media, suitable for pools upto 100 cubic meters

DELIVERY: MSF Mega Sand Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Mega MFS Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Made of premium grade high density polyethylene. The Mega line offers heavy duty operation and sustains a high working temperature. Only first class virgin high density polyethylene raw materials made by Phillips Chemicals are used in the production of our filters. The unique twist lock is designed for ease of servicing and maintenance of the filter.

The Mega S Series Side Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Mega Side mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

17" requires 40kg media, suitable for pools upto 38 cubic meters

20" requires 70kg media, suitable for pools upto 52 cubic meters

24" requires 125kg media, suitable for pools upto 70 cubic meters

27" requires 185kg media, suitable for pools upto 100 cubic meters

DELIVERY: Mega MFV Sand Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

RETURNS: Mega MFV Sand Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

PRODUCT INFO:

Mega MFV Top Mount Sand Filter is made of premium grade high density polyethylene. The Mega line offers heavy duty operation and sustains a high working temperature. Only first class virgin high density polyethylene raw materials made by Phillips Chemicals are used in the production of our filters. The unique twist lock is designed for ease of servicing and maintenance of the filter.

The Mega S Series Side Mount Sand Filter can be used with standard 16/30-grade silica filter sand or glass media

Mega Side mount sand filters are designed to operate at a maximum pressure of 2.5 Bar.

17" requires 40kg media, suitable for pools upto 37 cubic meters

20" requires 70kg media, suitable for pools upto 52 cubic meters

24" requires 125kg media, suitable for pools upto 70 cubic meters

27" requires 185kg media, suitable for pools upto 100 cubic meters

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is Made To Order and can not be returned as part of the Standard Returns Policy. .

PRODUCT INFO:

Free Installation on our 2021 Model Granite Grey DuoSpa S380 with Chrome Jets & Ozonator included. The Duraspa S380 is a truly portable, Top-Spec 5 – 6 person hot tub spa with 2 Loungers. The Duraspa S380 measures 1990mm x 1990mm x 770 deep. This generally allows the Duraspa S380 Hot Tub to fit through most household doorways.

We have this on display at our Shop so why not visit us and see this great looking hot tub

The New 2021 Granite Grey Duraspa S380 Now Includes Delivery & Installation, Chrome Jets & Ozonator as standard.

The Duraspa S380 Hot Tub is manufactured using a Roto mould technique making it light, strong, compact and attractive. Designed to fit through most normal doorways the Rotospa range of Hot Tubs The DuraSpa S380 has two loungers, one deep Captains seat, two hydrotherapy seats, a volcanic like air blower, foot massage jets and an entry step that doubles up as a raised child’s seat, the Dura Spa 5-6 person Hot Tub Spa really does have similar power and performance to a hot tub that costs £'000s more.

Equipment

• 2.5hp Two Speed "SpaQuip" pump
• 2 kw heater
• 50 sq ft Top load high flow cartridge filter
• 1.5hp Multispeed Air Injection Blower

Spa System

• 20 x Luxury Hydro Chrome Jet Package including:
• 5 x 5" Roto Adjustable "Storm" Chrome Jet
• 3 x 3.5" Luxury Adjustable Chrome Jet
• 6 x Neck and Shoulder acupressure Chrome Jets
• 2 x Side acupressure Chrome Jets
• 4 x Foot acupressure Chrome Jets(2 adjustable)
• 18 x Multipoint air injector Chrome Jets around lower back and footwell areas

Controls

• "Silent" air control system (to adjust air stream in hydro jets)
• Deluxe Digital Touch Pad control system 
• MultiSpeed Air Control System

Accessories

• Thermally insulated lockable hardcover 

Spa Colour

• Granite Grey

The Duraspa is designed and moulded in one piece generating soft flowing curves and rounded corners making for a very aesthetically pleasing look. The finishing touch are the four cedar panels that, on one side, remove to allow access to the pumps and heater.

The Duraspa's carefully designed shape contours to offer smooth, full deep seating all with natural reclining positions. The Duraspa has two loungers, three further active seats, one of which is a "Captains Chair" offering the best massage that we have been able to find in a hot tub of any price, as well as a "Cool Down" seat that also doubles as the entry step. Further features include a foot massage section, supporting armrests, padded headrests and contoured handrails.

The Rotomould design of the DuraSpa is an advanced RIM (Rotational Integrated Mould) moulding process that is used to form the spa, the surrounds and the base in one piece. This reduces the weight, increases the strength and lowers the cost with excellent heat and noise insulation. This same design has allowed for an Ipod jackpoint to be added that uses the Hot Tub body as the speakers.

One of the many benefits that the Duraspa has when compared to other Hot Tubs of a similar price is that the Rotomould design completely eliminates the rotting, delaminating, cracking, corrosion and osmosis problems that happens with all but the most expensive acrylic hot tubs. All in all the Duraspa really does offer best value for money.

Duraspa S380 is also avaliable in Midnight Blue, Light Grey & Sandstone

If you have any questions or concerns regarding the delivery please do not hesitate to call.

The two things you will need to do prior to delivery are to ensure that the Duraspa S380 will fit through access points, whether doorways or side access, (dont forget the hot tub doesn't bend) and have an electrician install a Commando socket, connected to a suitable power supply with the correct breaker. We will send you a "pre-delivery" checklist to help you through this process.

If you cannot get an electrician to install the Commando socket before the delivery date, but can't wait to use the hot tub, then we can offer an RCD Plug extension with a total of 5 metres of cable, to allow you to enjoy the hot tub until the electrician fits the hardwired connection.

All Rotospa Hot Tubs are produced in the UK and come with a Manufacturers 3 Year Shell & 1 Year Plumbing, Parts & Equipment Warranty

• 1000 - 1100 litres. (5 to 6 persons)
• Weight - 130 kg Dry (1200 kg Filled)
  
• Electrical - Commando Socket - Hard Wired To Consumer Unit
• Optional RCD Plug Extension For 13 Amp Sockets
  
• Made In UK

Rotospa engineers will then deliver the Duraspa S380 hot tub for you. We would be happy to advise you on the necessary electrics and help with any access questions, just call us on 01322 554 870

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is Made To Order and can not be returned as part of the Standard Returns Policy. .

PRODUCT INFO:

Free Installation on our 2021 Model Sandstone DuoSpa S380 with Chrome Jets & Ozonator included. The Duraspa S380 is a truly portable, Top-Spec 5 – 6 person hot tub spa with 2 Loungers. The Duraspa S380 measures 1990mm x 1990mm x 770 deep. This generally allows the Duraspa S380 Hot Tub to fit through most household doorways.

Sandstone Duraspa S380 Now Includes Delivery & Installation, Chrome Jets & Ozonator as standard.

The Duraspa S380 Hot Tub is manufactured using a Roto mould technique making it light, strong, compact and attractive. Designed to fit through most normal doorways the Rotospa range of Hot Tubs The DuraSpa S380 has two loungers, one deep Captains seat, two hydrotherapy seats, a volcanic like air blower, foot massage jets and an entry step that doubles up as a raised child’s seat, the Dura Spa 5-6 person Hot Tub Spa really does have similar power and performance to a hot tub that costs £'000s more.

Equipment

• 2.5hp Two Speed "SpaQuip" pump
• 2 kw heater
• 50 sq ft Top load high flow cartridge filter
• 1.5hp Multispeed Air Injection Blower

Spa System

• 20 x Luxury Hydro Chrome Jet Package including:
• 5 x 5" Roto Adjustable "Storm" Chrome Jet
• 3 x 3.5" Luxury Adjustable Chrome Jet
• 6 x Neck and Shoulder acupressure Chrome Jets
• 2 x Side acupressure Chrome Jets
• 4 x Foot acupressure Chrome Jets(2 adjustable)
• 18 x Multipoint air injector Chrome Jets around lower back and footwell areas

Controls

• "Silent" air control system (to adjust air stream in hydro jets)
• Deluxe Digital Touch Pad control system 
• MultiSpeed Air Control System

Accessories

• Thermally insulated lockable hardcover 

Spa Colour

• Sandstone

The Duraspa is designed and moulded in one piece generating soft flowing curves and rounded corners making for a very aesthetically pleasing look. The finishing touch are the four cedar panels that, on one side, remove to allow access to the pumps and heater.

The Duraspa's carefully designed shape contours to offer smooth, full deep seating all with natural reclining positions. The Duraspa has two loungers, three further active seats, one of which is a "Captains Chair" offering the best massage that we have been able to find in a hot tub of any price, as well as a "Cool Down" seat that also doubles as the entry step. Further features include a foot massage section, supporting armrests, padded headrests and contoured handrails.

The Rotomould design of the DuraSpa is an advanced RIM (Rotational Integrated Mould) moulding process that is used to form the spa, the surrounds and the base in one piece. This reduces the weight, increases the strength and lowers the cost with excellent heat and noise insulation. This same design has allowed for an Ipod jackpoint to be added that uses the Hot Tub body as the speakers.

One of the many benefits that the Duraspa has when compared to other Hot Tubs of a similar price is that the Rotomould design completely eliminates the rotting, delaminating, cracking, corrosion and osmosis problems that happens with all but the most expensive acrylic hot tubs. All in all the Duraspa really does offer best value for money.

Duraspa S380 is also avaliable in Midnight Blue, Light Grey & Dark Grey

If you have any questions or concerns regarding the delivery please do not hesitate to call.

The two things you will need to do prior to delivery are to ensure that the Duraspa S380 will fit through access points, whether doorways or side access, (dont forget the hot tub doesn't bend) and have an electrician install a Commando socket, connected to a suitable power supply with the correct breaker. We will send you a "pre-delivery" checklist to help you through this process.

If you cannot get an electrician to install the Commando socket before the delivery date, but can't wait to use the hot tub, then we can offer an RCD Plug extension with a total of 5 metres of cable, to allow you to enjoy the hot tub until the electrician fits the hardwired connection.

All Rotospa Hot Tubs are produced in the UK and come with a Manufacturers 3 Year Shell & 1 Year Plumbing, Parts & Equipment Warranty

• 1000 - 1100 litres. (5 to 6 persons)
• Weight - 130 kg Dry (1200 kg Filled)
  
• Electrical - Commando Socket - Hard Wired To Consumer Unit
• Optional RCD Plug Extension For 13 Amp Sockets
  
• Made In UK

Rotospa engineers will then deliver the Duraspa S380 hot tub for you. We would be happy to advise you on the necessary electrics and help with any access questions, just call us on 01322 554 870

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is Made To Order and can not be returned as part of the Standard Returns Policy. .

PRODUCT INFO:

The Commando socket is ideal for the Duraspa S380 as it is designed to meet all relevant European and British Standards, whilst offering remarkable impact strength and an excellent choice of ingress protection ratings. Outstanding temperature performance and good resistance to chemicals make it ideal for Hot Tub installations