DELIVERY: Mr Perfect InverPad Inverter Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Mr Perfect InverPad Inverter Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a returned Mr Perfect InverPad Inverter Swimming Pool Heat Pump is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Mr Perfect InverPad Inverter Swimming Pool Heat Pumps, with 5 Year On-Site Parts & Labour Labour Warranty,

In 2024 the UK's quietest heat pumps are the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps. All models have WIFI built in, and Mr Perfect Inverter Heat Pumps are 20 times quieter than other heat pumps thanks to their nearly silent fan and compressor.

For this changing world, with rising energy costs, the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps provide "All Year Round" heating by operating in temperatures as low as -15 degrees Celsius and heating water to 40 degrees Celsius whilst, at times, only using 7% of the electricity you would have used with an electric heater and 30% when compared to a standard On/Off heat pump.

With Mr Perfect InverPad Inverter Swimming Pool Heat Pumps, with 5-Year On-Site Labour Warranty and a 5 Year Parts Warranty, you can enjoy both quiet operation and all year-round heating with the knowledge you are covered in the unlikely event anything goes .

Even if you don't require year-round heating, having a swimming pool heat pump that can operate with an efficient COP at low temperatures means that the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps will enable you to quickly and affordably heat an outdoor pool at the start and end of the season, which are typically the hardest times to keep the pool warm.

The Mr Perfect InverPad Inverter Swimming Pool Heat Pumps are the most up to date Swimming Pool Heating because they are loaded with the best quality components and innovative fan and evaporator design, that offers higher COP and increased effectiveness, while being even quieter than any other pool heat pump in the UK.

The Mr Perfect InverPad Inverter Swimming Pool Heat Pumps will be able to provide you with a 52 Week All-Year Round Swimming Season or just an Extended Season, depending on which size of Heat Pump you buy. So, if you require an Ultra Quiet, Super-Efficient heat pump for 12 month swimming use or only to extend the Summer season call us on 01322 554 870 to help you decide which Mr Perfect InverPad Inverter Swimming Pool Heat Pumps is best suited for your needs.

You may not require your pool heated in low temperatures but having a heat pump that will not freeze up or cut off at 10° or 5° degrees can be a huge benefit, as April and October mornings may be a lot cooler, even though you may not be using your pool you will still need to heat it to be able to use your pool in the afternoons when it is sunny and warm. 

If you require help sizing your Mr Perfect InverPad Inverter Swimming Pool Heat Pumps for your pool please call us on 01322 554 870

WHAT'S INCLUDED WITH MR PERFECT SWIMMING POOL HEAT PUMP

• 5 Year On-Site Parts & Labour Warranty
• Dark Grey Aluminium Casing with detachable grille(s) for evaporator cleaning.
• Built-in Wi-Fi (2.4g).
• 2m Prewired 6mm flexible electric cable.
• 32AMP IP61 Isolator Switch.
• 32AMP IP67 Waterproof quick disconnect for easy cleaning and winterising.
• 40mm Rubber Anti-Vibration Feet
• Drainage Kit.
• Canvas Winter Cover.
• Kerbside Pallet Delivery.

Mr Perfect Inverpad Inverter Heat Pump With Wi-Fi Brochure

DELIVERY: Mr Perfect InverPad Inverter Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Mr Perfect InverPad Inverter Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a returned Mr Perfect InverPad Inverter Swimming Pool Heat Pump is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Mr Perfect InverPad Inverter Swimming Pool Heat Pumps, with 3-Year On-Site Labour Warranty

In 2024 the UK's quietest heat pumps are the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps. All models have WIFI built in, and Mr Perfect Inverter Heat Pumps are 20 times quieter than other heat pumps thanks to their nearly silent fan and compressor.

For this changing world, with rising energy costs, the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps provide "All Year Round" heating by operating in temperatures as low as -15 degrees Celsius and heating water to 40 degrees Celsius whilst, at times, only using 7% of the electricity you would have used with an electric heater and 30% when compared to a standard On/Off heat pump.

With Mr Perfect InverPad Inverter Swimming Pool Heat Pumps, with 3-Year On-Site Labour Warranty and a 5 Year Parts Warranty, you can enjoy both quiet operation and all year-round heating with the knowledge you are covered in the unlikely event anything goes .

Even if you don't require year-round heating, having a swimming pool heat pump that can operate with an efficient COP at low temperatures means that the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps will enable you to quickly and affordably heat an outdoor pool at the start and end of the season, which are typically the hardest times to keep the pool warm.

The Mr Perfect InverPad Inverter Swimming Pool Heat Pumps are the most up to date Swimming Pool Heating because they are loaded with the best quality components and innovative fan and evaporator design, that offers higher COP and increased effectiveness, while being even quieter than any other pool heat pump in the UK.

The Mr Perfect InverPad Inverter Swimming Pool Heat Pumps will be able to provide you with a 52 Week All-Year Round Swimming Season or just an Extended Season, depending on which size of Heat Pump you buy. So, if you require an Ultra Quiet, Super-Efficient heat pump for 12 month swimming use or only to extend the Summer season call us on 01322 554 870 to help you decide which Mr Perfect InverPad Inverter Swimming Pool Heat Pumps is best suited for your needs.

You may not require your pool heated in low temperatures but having a heat pump that will not freeze up or cut off at 10° or 5° degrees can be a huge benefit, as April and October mornings may be a lot cooler, even though you may not be using your pool you will still need to heat it to be able to use your pool in the afternoons when it is sunny and warm. 

If you require help sizing your Mr Perfect InverPad Inverter Swimming Pool Heat Pumps for your pool please call us on 01322 554 870

WHAT'S INCLUDED WITH MR PERFECT SWIMMING POOL HEAT PUMP

• 3 Year On-Site Labour Warranty With A 5-Year Parts Warranty
• Dark Grey Aluminium Casing with detachable grille(s) for evaporator cleaning.
• Built-in Wi-Fi (2.4g).
• 2m Prewired 6mm flexible electric cable.
• 32AMP IP61 Isolator Switch.
• 32AMP IP67 Waterproof quick disconnect for easy cleaning and winterising.
• 40mm Rubber Anti-Vibration Feet
• Drainage Kit.
• Canvas Winter Cover.
• Kerbside Pallet Delivery.

Mr Perfect Inverpad Inverter Heat Pump With Wi-Fi Brochure

DELIVERY: Mr Perfect Super Silent Heat Pump are sent out on a palletised 2 day service. This item may take slightly longer as it is shipped via specialist hauliers.

RETURNS: All products can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Available in March 2024 and for pre ordering now, we can offer the latest in swimming pool heat pump technology

Mr Perfect Super Silent Heat Pump are the Best Swimming Pool Heat Pump available in the UK ,offering the Latest technology with patented inver-pad paddle-fan for super quiet performance

The Mr Perfect Inverter Heat Pumps from Aquark are Built to the highest specification, we can offer up to 5 years parts and labour warranty. 12 years warranty on the compressor and heat exchanger.

Patented technology provides unrivaled performance with the air omitted from both sides of the heat pump rather from one side or from the top. 

Also supplied are 40mm rubber anti-vibration feet, drainage kit, canvas winter cover & 32AMP electrical quick-disconnect and Isolator switch.

If noise is an issue, then the Mr Perfect Inverter Heat Pumps from Aquark are the perfect choice. With an A Grade Energy Label, extremely quiet running.

As an example the 27kw version only produces 39 decibels @1m in inverter mode, this out performs the Garden Pac and Calorex model of similar size

Low Turbo Fan super quiet Mitsubishi compressor with 10-year warranty, incorporating patented inver-pad paddle-fan and with a built-in Soft Start, makes these swimming pool heat pumps the Top of the most quietest swimming pool heat pump list.

Now you can have both quiet running and all year heating in one very competitively priced heat pump, backed up by an industry leading warranty. Even if you do not need all year heating having the capability to run with an effective COP at low temperatures means the Mr Perfect Super Silent Heat Pump will allow you to heat an outdoor pool at the beginning and end of the season, normally the hardest times to keep the pool warm when using a heat pump.

5 sizes available from 22kw to 41kw. Massive 32kw is available in single phase

If you would like the Mr Perfect Inver-Pad Super Silent Swimming Pool Heat Pump with a longer and more comprehensive warranty then click the links below to view the offer pages.

Mr Perfect Inver-Pad Super Silent Swimming Pool Heat Pump + 5 Year On-Site Part & Labour Warranty

Mr Perfect Inver-Pad Super Silent Swimming Pool Heat Pump + 3 Year On-Site Parts & Labour Warranty

It is imperative to size your swimming pool heat pump correctly, so we ask that you please call is on 01322 554 870, to run through your requirements and get our best price at the same time.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: The Calorex I-Pac Y Range Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for a refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Calorex Y Range I-PAC+ 16 Inverter Swimming Pool Heat Pumps are one of the most sustainable ways to heat swimming pool water. Providing significant savings compared to traditional methods of pool heating  

Why Buy a Calorex I-PAC+ 22 Inverter Wi-Fi Y Range Heat Pump

Calorex I-PAC+ 22 Wi-Fi Inverter Y Range Heat Pumps are a Quality Brand, providing reliability, back up and high performance. Choosing a heat pump is not straight forward, there is no universal standard for heat pumps and each model is calculated to produce a specific KW at a different air temperature. Swimming pool heat pumps in general will save you a significant amount of energy / money compared to traditional methods of heating a pool. Calorex I-PAC+ 22 Inverter Y Range Heat Pumps are calculated to heat your pool based on surface area and are more guaranteed to maintain pool temperature. Give us a call on 01322554870 and we can provide heating costs, options, accurate sizing on the Calorex I-PAC+ Inverter Y range.  

Calorex I-Pac+ 22 Inverter Y Range Swimming pool heat pumps are available for a long extended season or All Year Round Swimming, depending on the size of your pool. It is important to get the right heater for your pool and your personal pool requirements, If you would like assistance in sizing which unit would suit your swimming pool, call us on 01322554870 and we can help advise which swimming pool heat pump will suit your requirements. 

The Calorex I-PAC+ 22 'Y' Range Extended OR All Year Round Season Heat Pumps incorporates hot gas defrost. Perfect for UK weather

Based on Surface area of swimming pool for MARCH TO NOVEMBER USE

IPT22ALY    I-PAC+ 22      Water temp 28c surface area 54m2 (580sq ft)

Based on Surface area of swimming pool for ALL YEAR ROUND USE

IPT22ALY    I-PAC+ 22       Water temp 28c surface area 35m2 (380sq ft)

 CALOREX I-PAC+ 22 Y RANGE WI-FI INVERTER SWIMMING POOL HEAT PUMP VIDEO

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: The Calorex I-Pac Y Range Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for a refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Calorex Y Range I-PAC+ 16 Inverter Swimming Pool Heat Pumps are one of the most sustainable ways to heat swimming pool water. Providing significant savings compared to traditional methods of pool heating  

Why Buy a Calorex I-PAC+ 16 Inverter Wi-Fi Y Range Heat Pump

Calorex I-PAC+ 16 Wi-Fi Inverter Y Range Heat Pumps are a Quality Brand, providing reliability, back up and high performance. Choosing a heat pump is not straight forward, there is no universal standard for heat pumps and each model is calculated to produce a specific KW at a different air temperature. Swimming pool heat pumps in general will save you a significant amount of energy / money compared to traditional methods of heating a pool. Calorex I-PAC+ 16 Inverter Y Range Heat Pumps are calculated to heat your pool based on surface area and are more guaranteed to maintain pool temperature. Give us a call on 01322554870 and we can provide heating costs, options, accurate sizing on the Calorex I-PAC+ Inverter Y range.  

Calorex I-Pac+ 16 Inverter Y Range Swimming pool heat pumps are available for a long extended season or All Year Round Swimming, depending on the size of your pool. It is important to get the right heater for your pool and your personal pool requirements, If you would like assistance in sizing which unit would suit your swimming pool, call us on 01322554870 and we can help advise which swimming pool heat pump will suit your requirements. 

The Calorex I-PAC+ 16 'Y' Range Extended OR All Year Round Season Heat Pumps incorporates hot gas defrost. Perfect for UK weather

Based on Surface area of swimming pool for MARCH TO NOVEMBER USE

IPT16ALY    I-PAC+ 16       Water temp 28c surface area 44m2 (470 sq ft)

Based on Surface area of swimming pool for ALL YEAR ROUND USE

IPT16ALY    I-PAC+ 16       Water temp 28c surface area 26m2 (280sq ft)

 CALOREX I-PAC+ 16 Y RANGE WI-FI INVERTER SWIMMING POOL HEAT PUMP VIDEO

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: The Calorex I-Pac Y Range Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for a refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Calorex Y Range I-PAC+ 12 Inverter Swimming Pool Heat Pumps are one of the most sustainable ways to heat swimming pool water. Providing significant savings compared to traditional methods of pool heating  

Why Buy a Calorex I-PAC+ 12 Inverter Wi-Fi Y Range Heat Pump

Calorex I-PAC+ 12 Wi-Fi Inverter Y Range Heat Pumps are a Quality Brand, providing reliability, back up and high performance. Choosing a heat pump is not straight forward, there is no universal standard for heat pumps and each model is calculated to produce a specific KW at a different air temperature. Swimming pool heat pumps in general will save you a significant amount of energy / money compared to traditional methods of heating a pool. Calorex I-PAC+ 12 Inverter Y Range Heat Pumps are calculated to heat your pool based on surface area and are more guaranteed to maintain pool temperature. Give us a call on 01322554870 and we can provide heating costs, options, accurate sizing on the Calorex I-PAC+ Inverter Y range.  

Calorex I-Pac+ 12 Inverter Y Range Swimming pool heat pumps are available for a long extended season or All Year Round Swimming, depending on the size of your pool. It is important to get the right heater for your pool and your personal pool requirements, If you would like assistance in sizing which unit would suit your swimming pool, call us on 01322554870 and we can help advise which swimming pool heat pump will suit your requirements. 

The Calorex I-PAC+ 12 'Y' Range Extended OR All Year Round Season Heat Pumps incorporates hot gas defrost. Perfect for UK weather

Based on Surface area of swimming pool for MARCH TO NOVEMBER USE

IPT12ALY    I-PAC+ 12       Water temp 28c surface area 32m2 (350 sq ft)

Based on Surface area of swimming pool for ALL YEAR ROUND USE

IPT12ALY    I-PAC+ 12       Water temp 28c surface area 20m2 (220 sq ft)

 CALOREX I-PAC+ 12 Y RANGE WI-FI INVERTER SWIMMING POOL HEAT PUMP VIDEO

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: The Calorex I-Pac X Range Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for a refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Calorex X Range I-Pac 22 Inverter Swimming Pool Heat Pumps are one of the most sustainable ways to heat swimming pool water. Providing significant savings compared to traditional methods of pool heating  

Why Buy a Calorex I-PAC 22 Inverter Wi-Fi X Range Heat Pump

Calorex I-PAC 22 Wi-Fi Inverter X Range Heat Pumps are a Quality Brand, providing reliability, back up and high performance. Choosing a heat pump is not straight forward, there is no universal standard for heat pumps and each model is calculated to produce a specific KW at a different air temperature. Swimming pool heat pumps in general will save you a significant amount of energy / money compared to traditional methods of heating a pool. Calorex I-PAC 16 Inverter X Range Heat Pumps are calculated to heat your pool based on surface area and are more guaranteed to maintain pool temperature. Give us a call on 01322554870 and we can provide heating costs, options, accurate sizing on the Calorex I-PAC Inverter X range.  

Calorex I-Pac 22 Inverter X Range Swimming pool heat pumps are available for an extended season use during typical outdoor swimming pool usage periods. It is important to get the right heater for your pool and your personal pool requirements, If you would like assistance in sizing which unit would suit your swimming pool, call us on 01322554870 and we can help advise which swimming pool heat pump will suit your requirements. 

The Calorex I-PAC 22 'X' Range Extended Season Heat Pumps incorporates hot gas defrost. Perfect for UK summers

Based on Surface area of swimming pool for MAY TO SEPTEMBER USE

IPT22ALX    I-PAC 22       Water temp 28c surface area 80m2 (850 sq ft)

 CALOREX I-PAC 22 WI-FI INVERTER SWIMMING POOL HEAT PUMP VIDEO

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: The Calorex I-Pac X Range Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for a refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Calorex X Range I-Pac 16 Inverter Swimming Pool Heat Pumps are one of the most sustainable ways to heat swimming pool water. Providing significant savings compared to traditional methods of pool heating  

Why Buy a Calorex I-PAC 16 Inverter Wi-Fi X Range Heat Pump

Calorex I-PAC 16 Wi-Fi Inverter X Range Heat Pumps are a Quality Brand, providing reliability, back up and high performance. Choosing a heat pump is not straight forward, there is no universal standard for heat pumps and each model is calculated to produce a specific KW at a different air temperature. Swimming pool heat pumps in general will save you a significant amount of energy / money compared to traditional methods of heating a pool. Calorex I-PAC 16 Inverter X Range Heat Pumps are calculated to heat your pool based on surface area and are more guaranteed to maintain pool temperature. Give us a call on 01322554870 and we can provide heating costs, options, accurate sizing on the Calorex I-PAC Inverter X range.  

Calorex I-Pac 16 Inverter X Range Swimming pool heat pumps are available for an extended season use during typical outdoor swimming pool usage periods. It is important to get the right heater for your pool and your personal pool requirements, If you would like assistance in sizing which unit would suit your swimming pool, call us on 01322554870 and we can help advise which swimming pool heat pump will suit your requirements. 

The Calorex I-PAC 16 'X' Range Extended Season Heat Pumps incorporates hot gas defrost. Perfect for UK summers

Based on Surface area of swimming pool for MAY TO SEPTEMBER USE

IPT16ALX    I-PAC 16       Water temp 28c surface area 60m2 (650 sq ft)

 CALOREX I-PAC 16 WI-FI INVERTER SWIMMING POOL HEAT PUMP VIDEO

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: The Calorex I-Pac X Range Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for a refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Calorex X Range I-Pac 12 Inverter Swimming Pool Heat Pumps are one of the most sustainable ways to heat swimming pool water. Providing significant savings compared to traditional methods of pool heating  

Why Buy a Calorex I-PAC 12 Inverter Wi-Fi X Range Heat Pump

Calorex I-PAC 12 Wi-Fi Inverter X Range Heat Pumps are a Quality Brand, providing reliability, back up and high performance. Choosing a heat pump is not straight forward, there is no universal standard for heat pumps and each model is calculated to produce a specific KW at a different air temperature. Swimming pool heat pumps in general will save you a significant amount of energy / money compared to traditional methods of heating a pool. Calorex I-PAC 12 Inverter X Range Heat Pumps are calculated to heat your pool based on surface area and are more guaranteed to maintain pool temperature. Give us a call on 01322554870 and we can provide heating costs, options, accurate sizing on the Calorex I-PAC Inverter X range.  

Calorex I-Pac 12 Inverter X Range Swimming pool heat pumps are available for an extended season use during typical outdoor swimming pool usage periods. It is important to get the right heater for your pool and your personal pool requirements, If you would like assistance in sizing which unit would suit your swimming pool, call us on 01322554870 and we can help advise which swimming pool heat pump will suit your requirements. 

The Calorex I-PAC 12 'X' Range Extended Season Heat Pumps incorporates hot gas defrost. Perfect for UK summers

Based on Surface area of swimming pool for MAY TO SEPTEMBER USE

IPT12ALX    I-PAC 12       Water temp 28c surface area 46m2 (500 sq ft)

 CALOREX I-PAC 12 WI-FI INVERTER SWIMMING POOL HEAT PUMP VIDEO

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: The Calorex I-Pac X Range Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for a refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Calorex X Range I-Pac 8 Inverter Swimming Pool Heat Pumps are one of the most sustainable ways to heat swimming pool water. Providing significant savings compared to traditional methods of pool heating  

Why Buy a Calorex I-PAC 8 Inverter Wi-Fi X Range Heat Pump

Calorex I-PAC 8 Wi-Fi Inverter X Range Heat Pumps are a Quality Brand, providing reliability, back up and high performance. Choosing a heat pump is not straight forward, there is no universal standard for heat pumps and each model is calculated to produce a specific KW at a different air temperature. Swimming pool heat pumps in general will save you a significant amount of energy / money compared to traditional methods of heating a pool. Calorex I-PAC 8 Inverter X Range Heat Pumps are calculated to heat your pool based on surface area and are more guaranteed to maintain pool temperature. Give us a call on 01322554870 and we can provide heating costs, options, accurate sizing on the Calorex I-PAC Inverter X range.  

Calorex I-Pac 8 Inverter X Range Swimming pool heat pumps are available for an extended season use during typical outdoor swimming pool usage periods. It is important to get the right heater for your pool and your personal pool requirements, If you would like assistance in sizing which unit would suit your swimming pool, call us on 01322554870 and we can help advise which swimming pool heat pump will suit your requirements. 

The Calorex I-PAC 8 'X' Range Extended Season Heat Pumps incorporates hot gas defrost. Perfect for UK summers

Based on Surface area of swimming pool for MAY TO SEPTEMBER USE

IPT8ALX    I-PAC 8       Water temp 28c surface area 28m2 (300 sq ft)

 CALOREX I-PAC 8 WI-FI INVERTER SWIMMING POOL HEAT PUMP VIDEO

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For 3 Phase Commercial Pool Pumps below 15HP is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For 3 Phase Commercial Pool Pumps Up To (but not including) 15HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

We Have Inverter Variable Speed Drives Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Just search our website to find yours or call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 15HP (11.2kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £33,237 per year running costs

Cost of unit £2025.00

Suggested Cost of installation £350.00

Total cost £2,375.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £27,299 Per Annum.

Cost saving of £8907 Per Annum is £742 per month saving and just over 3 months for return on investment and payback on purchase & installation cost.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For 3 Phase Commercial Pool Pumps below 10HP is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For 3 Phase Commercial Pool Pumps Up To (but not including) 10HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

We Have Inverter Variable Speed Drives Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Just search our website to find yours or call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 10HP (7.46kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £22,158 per year running costs

Cost of unit £1764.00

Suggested Cost of installation £350.00

Total cost £2,114.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £16,220 Per Annum.

Cost saving of £5938 Per Annum is £494 per month saving and just over 4 months for return on investment and payback on purchase & installation cost.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For 3 Phase Commercial Pool Pumps below 7.5HP is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For 3 Phase Commercial Pool Pumps Up To (but not including) 7.5HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

We Have Inverter Variable Speed Drives Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Just search our website to find yours or call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 7.5HP (5.6kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £16,633 per year running costs

Cost of unit £1566.00

Suggested Cost of installation £350.00

Total cost £1916.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £12,175 Per Annum.

Cost saving of £4458 Per Annum is £371 per month saving and just over 5 months for return on investment and payback on purchase & installation cost.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.


When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For Commercial Pool Pumps below 5.5HP is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For Commercial Pool Pumps Up To 5.5HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

This Inverter Variable Speed Drive is Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 5.5HP (4.1kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £12,178 per year running costs

Cost of unit £972.00

Suggested Cost of installation £350.00

Total cost £1322.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £8914 Per Annum.

Cost saving is £272 per month and 5 months payback on purchase & installation costs.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.


When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For Commercial Pool Pumps below 3HP is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For Commercial Pool Pumps Up To 3HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

This Inverter Variable Speed Drive is Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 2.5HP (1.865kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- Running Costs £5,540 Per Year

Cost of unit £891.00

Suggested Cost of installation £350.00

Total cost £1241.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £4055 Per Annum.

Cost saving is £123.75 per month and 10 months payback on installation.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery