DELIVERY: Hydropro P8/32 Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Hydropro P8/32 Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Hydropro P8/32 Heat Pump is ideally sized for a 15ft x 48" Above Ground Pool to extend the Swimming season from May to September. A good Solar Cover must be used in conjunction with the heater

Hydro Pro P8 Heat Pump

Ideal Pool Size 15ft x 48" Round

Maximum Pool Size 20ft x 12ft x 4ft Oval

Hydropro P8 Swimming Pool Heat Pumps are capable of both heating and cooling and will perfectly suit small pools with a maximum volume of water of 30m3 if used during the main summer months. Outside of the main Summer months, the heat pump should be used on smaller pools. Realistically, the Hydropro P8 could heat a pool with a capacity of 15m3 All Year Round, if insulated properly.

Using the Hydropro P8/32 to heat your pool for an extended season of May to September we would suggest that your pool is a maximum size of 15ft round x 48" deep.

The HydroPro P range of heat pumps has a working ambient air temperature of  –5 degrees Celcius, although at this temperature reduced C.O.P. and output is reduced. It might not seem that you need to heat your pool in low temperatures but having a Swimming Pool Heat Pump that will not cut out when the air temperature reaches 8 or 10 degrees Celcius has huge benefits at the beginning and end of the Extended Swimming Season. At these times of the year the morning and evening air temperatures can be as low as 5 degrees Celcius. When other heat pumps will stop working the Hydropro P8/32 will still be heating your pool for you to use whenever you want to. 

Outside installation is required for the Hydropro P8 to function correctly. Reduced airflow, both in or out, will dramatically reduce performance

With over 15 Years experience sizing and supplying Swimming Pool Heat Pumps we can provide Expert advice and save you a massive 80% on your heating bills. The Hydropro P8/32 Swimming Pool Heat Pump is despatched on the Same Day as ordering.

For help and advice on sizing your heat pump correctly call 01322 554 870

Hydropro P8/32 Swimming Pool Heat Pump - Users Manual English

Hydropro P8/32 Swimming Pool Heat Pump - COP Curve

DELIVERY: Sun Spring Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Sun Spring Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

As the larger Sunspring models are unavailable we can offer two alternatives

The Hydropro P12 Heat Pump, with 6m 3-Pin Plug cable, which functions at much lower temperatures than the Sunspring, so will heat your pool whatever weather we have in the Summer.  The link is below

Hydropro P12 Heat Pump With 6m 3-Pin Plug Cable - Plug & Play

The other option is the Flotide Hydro S A10 Plug & Play Heat Pump

Flotide Hydro S A10 10kw Plug & Play Heat Pump

The Sunspring Plug & Play Swimming Pool Heat Pumps are made especially above ground pools. These heat pumps, up to the 9kw, do not have to be hard-wired in, saving up to £500 on installation costs. As the 5, 8 & 12 Sun Spring Plug & Play Swimming Pool Heat Pump will plug into a 13 amp socket and does not require a by-pass, installation can be carried out in as little as 15 minutes by anyone. 

We have other ranges of Plug & Play Swimming Pool Heat Pumps available, which are less expensive than the Sunspring Heat Pump, but just as well made and all with 2 Year Warranties.

Poolstyle Mini 6 & 8 Plug & Play Above Ground Pool Heat Pump - Click Here

Flotide A10 9.6kw Plug & Play Swimming Pool Heat Pump - Click Here

To get the best from your Sunspring Heat Pump it is advisable to size the heat pump to the middle of its capabilities. To assist you in choosing the most suited Sunspring Heat Pump for your pool we have provided a guide of MAXIMUM POOL SIZES. If the volume of water in your pool is equal to or larger than the maximum volume it is always advisable to go for the next larger heat pump, as it will be easier to maintain your pool water temperature and potentially provide extended use outside the main 3 summer months.

Sunspring Heat Pumps Will Be Despatched Same Day If Ordered By 11 AM

For advice and help on choosing the Sunspring Heat Pump suitable for your pool please call us on 01322554870

Maximum Pool Size

Sunspring 5 Above Ground Pool Heat Pump  pools up to 12m3 - 15ft x 36" Metal Frame Pool

Sunspring 8 Above Ground Pool Heat Pump  pools up to 20m3 - 15ft x 48" Metal Frame Pool

Sunspring 12 Above Ground Pool Heat Pump  pools up to 30m3 - 18ft x 48" Metal Frame Pool

Minimum Flow rate required  

3m3/hr on Sunspring 5

4m3/hr on Sunspring 8

5m3/hr on Sunspring 12

Sunspring Heat Pumps come with graduated hose-tails to connect to 1.25" & 1.5" flexible hose. Also included are Glue Sockets for 50mm or 1.5" rigid pipe. In addition, no bypass kit is necessary.

The Sun Spring Heatpumps have a 2 Year Collect & Repair Or Replace Warranty. 

If you require help in sizing your heat pump or have any questions, please call us on 01322 55 4870

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Hot Splash HS40 Plug & Play Heat Pump For Above Ground Pools is the cheapest heat pump for swimming pools in the UK. The Hot Splash Heat Pump is also lightest & smallest above ground pool heat pump in the UK. Designed to heat small above ground pools up to 8m3, the Hot Splash Intex Pool Heat Pump will transform your above ground pool into the kids favourite thing. No more blue lips, only hours of warm water fun

For 12ft & larger Intex Pools we recommend the Poolstyle Mini Plug & Play Heat Pump For Intex Pools, just click on the text to be take you to the page, to buy yours now.

Hot Splash Above Ground Pool Heat Pumps, the Intex Pool Heat Pump, require 0.6kw of power input to produce 3.75kw of power out. That is only 10p an hour to get the equivalent of 36p of heat. If used on the pool sizes we suggest the Hot Splash Pool Heat Pump will warm your above ground Intex or Bestway pool so that it can be used for hours rather than minutes. The Hot Splash Heat Pump For Above Ground Pools costs so much less to run than an electric pool heater.

Minimum Flow rate required on Hot Splash Heat Pump For Above Ground Pools is 2m3/hr

No ByPass Required

A Heat Pump heats a pool slowly but very cost effectively. It will take 2 - 3 days to go from cold to warm, but after that it is just a matter of keeping the heat up every day.

A Good Quality Solar Cover Must be Used With This Heat Pump

The Hot Splash Above Ground Pool Heat Pump is suitable for pools up to 8m3

Below are suggestions for above ground Intex or Bestway pool sizes that the Hot Splash Above Ground Pool Heat Pump is suitable for

DELIVERY: AG Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: AG Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

PRODUCT INFO:

AG Mini Plug & Play Heat Pumps are ideal for above ground pools up to 18m3, such as an Intex or Bestway 12ft x 48" Metal Frame Pool.

It is suitable for heating a pool of 18m3 during the main Summer months. A Solar Cover has to be used whenever the pool is not in use, especially at night as this will speed up pool heating time and reduce heat loss at night by up to 5°C. Buy Now For Same Day Despatch.

The AG Mini Plug & Play Heat Pump requires 0.59kw of power to produce nearly 3kw of power out. That is roughly 8p an hour to get the equivalent of 40p of heat from the Poolex Nano Heat Pump into your pool making it so much cheaper to run than an electric pool heater.  You could even recoup the outlay in the first year in savings on your electricity bill.

The minimum flow rate from your pool pump is 2m3/hr to start the AG Mini Plug & Play Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

Digital Heating Control Panel - Control Heating Up To 30°C

No ByPass Required if using small Intex pumps

The AG Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible, especially at night.

The AG Mini Plug & Play Above Ground Pool Heat Pump is suitable for pools up to 12m3 

Below are suggestions for above ground pool sizes that the AG Mini Plug & Play Above Ground Pool Heat Pump is suitable for

DELIVERY: Flotide A10 Plug & Play Above Ground Pool Heat Pumps are sent out on a 2 working day service

RETURNS: Flotide A10 9.6kw Plug & Play Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

PRODUCT INFO:

Flotide A10 Plug & Play 9.6kw Above Ground Pool Heat Pumps are designed for larger Intex & Bestway pools, up to 30,000 litres. This would equate to a 20ft x 12ft Bestway pool.

Flotide A10 Plug & Play Heat Pumps have an exceptionally high COP of 6, meaning you can get up to 6 times more heat into your pool than it will cost you in electricity.

Flotide A10 Plug & Play Heat Pumps will function down to an air temperature of 5°C, but as with any heat pump, the warmer the air the more efficient they are and the more heat transferred into your pool. The warmer the air the better!!

CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

When purchasing a heat pump large enough for your pool you would usually have to take into account the cost to be hard wired into mains by and electrician on its own spurs and RCD. The Flotide A10 Plug & Play Above Ground Pool Heat Pump is reasonably priced, user friendly and runs from a standard UK 13amp 3-pin plug. Everything you could want from a heat pump unit for an above ground swimming pool. 

Below is a guide that is is based on summer use with a good solar cover being used. 

Flotide A10 Plug & Play Above Ground Pool Heat Pump pools - Pools up to 30m3

Minimum Flow rate required 5.5m3/hr 

Supplied with 50mm sockets to connect to a bypass kit or hosetails. These can be purchased separately

We can also assist with the correct fittings you may need to install this heater. Fittings will depend on the make and model of your pool and how far away from the pool you want the heat pump situated. Please call us on 01322554870 for help and advise on heat pump installations

CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

DELIVERY: Thermotec Penguin 4kw Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Thermotec Penguin 4kw Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When areturn is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

The Thermotec Penguin 4kw Above Ground Pool Heat Pump will not only be your kids favourite thing in 2023, but by the end of Summer it will be yours, too. This cute looking heat pump could save you £2500 in running costs, compared to a Bestway 3kw heater, in just one year.

Don't forget to buy a Solar Cover, they are essential and the better the quality the more money you save.

The Thermotec Penguin 4kw Heat Pump has a Minimum Flow rate requirement of 1.5m3/hr 

Digital Heating Control Panel - Control Heating Up To 30°C & No ByPass Required

All Swimming Pool Heat Pumps are designed to heat Pool water slowly but very cost-effectively. If you correctly size a Thermotec Penguin 4kw heat pump to heat your pool from cold to warm it will normally take 2 - 3 days, but following this initial heating period, it is just a matter of using the Thermotec Penguin 4kw Heat Pump to keep up the heat every day.

A Good Quality Solar Cover Must be Used With This Heat Pump

We would recommend the Thermotec Penguin 4kw Above Ground Pool Heat Pump for pools up to 10m3. If your pool is larger than this we would recommend a bigger plug & play heat pump, such as the Poolstyle Mini 6 Plug & Play Heat Pump or the Poolstyle Mini 8.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Hydropro P8 Swimming Pool Heat Pumps are ideal for smaller swimming pools up to 30m3 during the main summer months, slightly less if starting in April or the beginning of May.

The ideal size pool for this hydropro P8 swimming pool heat pump is an Intex, Bestway or similar 15ft x 48" pool

To see other sizes of hydropro heat pumps click here. Full Range Of Hydropro Heat Pumps

If you would like to ask us to price match a competitor, please click the Price Match image to send us the request.

For help and advice call 01322 554 870

Hydropro P8 Swimming Pool Heat Pump - Users Manual English

Hydropro P8 Swimming Pool Heat Pump - COP Curve