DELIVERY: Hydropro P12 Swimming Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

 

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

 

Hydropro P12/32 swimming pool heat pumps

are suitable for swimming pools up to 50m3 during the main summer months, slightly less if starting in April or the beginning of May. As the Hydropro P12 Heat Pump is one of the newest ranges of Swimming Pool Heat Pumps available they are supplied with R32 Gas

Comes complete with Plug and Play Cable Kit that needs to be installed by a competent person so perfect for inground and above ground pools

As the Hydropro P14 Heat Pump will function even when the ambient air temperature is as low as 0° Celcius they can be used all year round, but with reduced C.O.P. and output. To function correctly the heat pump will need to be sized correctly. As a very rough guide, it is suggested to at least double the Ideal Size, but it is advisable if you call us on 01322 554 870 to ensure suitability.

Hydropro P12 Heat Pump - Summer Use 

Ideal Size Pool 24ft x 12ft x 4ft Deep

Maximum Pool Size 24 ft x 12ft x 5ft Deep

To see other sizes of hydropro heat pumps click here. Full Range Of Heat Pumps

For help and advice call 01322 554 870

 

Hydropro P12/32 Heat Pump Data

heating power input	1.95 kW
heating capacity (A27/W27)	11.5 kW
heating capacity (A15/W26)	6.5 kW
maximum volume of pool with good insulation	50m3 / 50,000 litres
coefficient (C.O.P.)  at A27/W27	5.90
coefficient (C.O.P.)  at A15/W25	4.59
compressor	rotary
refrigerant	R32
fan quantity	1
fan power input	90
fan rotate speed	850 RPM
fan direction	Horizontal
noise level (10 metres)	43 dB (A)
water connection	50mm
nominal water flow	4.5 m/h3
dimensions (L/W/H)	100cm / 39cm / 60cm
Type C or D Breaker Size	15 amp

DELIVERY: Hydropro P14 Swimming Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Hydropro P14 Heat Pump is the latest Swimming Pool Heat Pump available with R32 Gas. The hydropro heat pumps are ideal for swimming pools up to 50m3 during the main summer months, slightly less if starting in April or the beginning of May.

As the Hydropro P14 Heat Pump will function down to -5° Celcius they can be used all year round. To function correctly it will need to be sized correctly. As a rough guide double the Ideal Size, but it is best if you call us on 01322 554 870

Hydropro P14 Heat Pump

Ideal Size Pool 28ft x 14ft x 4ft Deep

Maximum Pool Size 28 ft x 14ft x 5ft Deep

To see other sizes of hydropro heat pumps click here. Full Range Of Heat Pumps

For help and advice call 01322 554 870

 

Hydropro P14/32 Heat Pump Data

heating power input	2.35 kW
heating capacity (A27/W27)	13.5 kW
heating capacity (A15/W26)	9.8 kW
maximum volume of pool with good insulation	60m3 / 60,000 litres
coefficient (C.O.P.)  at A27/W27	5.74
coefficient (C.O.P.)  at A15/W25	4.52
compressor	rotary
refrigerant	R32
fan quantity	1
fan power input	120
fan rotate speed	850 RPM
fan direction	Horizontal
noise level (10 metres)	43 dB (A)
water connection	50mm
nominal water flow	5.3 m/h3
dimensions (L/W/H)	116cm / 47cm / 87cm
Type C or D Breaker Size	20 amp

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: The Hydropro P20 Heat Pump can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

 

Hydropro P 20 Swimming Pool Heat Pumps

are ideal for swimming pools up to 70m3 during the main summer months, slightly less if starting in April or the beginning of May.

Hydro Pro P20 Heat Pump

Ideal Size Pool - 30ft x 15ft x 4ft Deep

Maximum Size Pool - 30ft x 15ft x 5ft Deep

The Hydropro P20 will produce roughly 20kw of energy at 27 degrees air temp and nearly 14kw at 15 degrees while only drawing 2.87kw, making it an effective cost saving heating solution for your swimming pool. The Hydropro P20 contains the latest R32 gas making it more enviromentally freindly and better performing.These heat pumps need to have good ventilation and shuould be postition in an outdoor free to allow the ambient air to be drawn in and free to allow the cold air to escape

As an example the ideal size pool for this hydropro P20 swimming pool heat pump is a 30ft x 15ft that is 4ft deep swimming pool, although this is just a basic guide.

For help and advice call 01322 554 870

Hydropro P20 Heat Pump Data
Power Input	2.87 kW
Heating Capacity (A27/W27)	19.5 kW
Heating Capacity (A15/W26)	13.8 kW
Maximum Volume of Pool With Good Insulation	70m3 / 70,000 litres
Running Current	12.8 Amps
Power Supply Type C or D breaker	35 AMPS
Coefficient (C.O.P.)  at A27/W27	6.3
Coefficient (C.O.P.)  at A15/W25	4.81
Compressor	Rotary
Refrigerant	R32
Fan Quantity	1
Fan Power Input	2000
Fan Rotate Speed	850 RPM
Fan Direction	Horizontal
Noise Level (10 metres)	57 dB (A)
Water Connection	50mm
Minimum Water Flow	6.8 m3/h
Dimensions (L/W/H)	115cm / 47cm / 87cm

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Hydropro P8 Swimming Pool Heat Pumps are ideal for smaller swimming pools up to 30m3 during the main summer months, slightly less if starting in April or the beginning of May.

The ideal size pool for this hydropro P8 swimming pool heat pump is an Intex, Bestway or similar 15ft x 48" pool

To see other sizes of hydropro heat pumps click here. Full Range Of Hydropro Heat Pumps

If you would like to ask us to price match a competitor, please click the Price Match image to send us the request.

 

For help and advice call 01322 554 870

Hydropro P8 Swimming Pool Heat Pump - Users Manual English

Hydropro P8 Swimming Pool Heat Pump - COP Curve

Hydropro P8 Heat Pump Data
heating power input	1.32 kW
heating capacity (A27/W27)	8.31 kW
heating capacity (A15/W25)	5.71 kW
maximum volume of pool with good insulation	30m3 30,000 Litres
running current	5.9 AMPS
coefficient (C.O.P.)  at A27/W27	6.34
coefficient (C.O.P.)  at A15/W25	4.33
compressor	rotary
refrigerant	R32
fan quantity	1
fan power input	90
fan rotate speed	850 RPM
fan direction	Horizontal
noise level (10 metres)	42 dB (A)
water connection	50mm
nominal water flow	3 m/h3
dimensions (L/W/H)	95cm / 35cm / 60cm
unit shipping dimensions (L/W/H)	97cm  / 37cm / 62cm
net weight/ shipping weight	47 KG
slow fuse current	15 AMPS