Google Shopping Products

A range of swimming pool products that are also available on the Google Shopping Network

Flotide ECO 3kw A3/32 Plug & Play Above Ground Pool Heat Pump

by World of Pools.com
Save 31%
£495.00
£340.00
  • Flotide ECO 3kw A3/32 Swimming Pool Plug & Play Heat Pump
  • Heats Your Pool Up To 30°C
  • Works When Air Temperature Is Over 12°C
  • Heat Pump For Intex, Bestway & Other Above Ground Pools
  • Suits Pools Up To 12ft x 36"
  • 2 Year Warranty

DELIVERY: Flotide ECO 3kw A3/32 Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Flotide ECO 3kw A3/32 Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occu

PRODUCT INFO:

The Flotide 3kw A3/32 Plug & Play Heat Pump is perfect for pools up to 10m3, such as an Intex 12ft x 36" Metal Frame Pool. Only suitable for pool heating during the main Summer months. A Solar Cover must be used too. Buy Now For Same Day Despatch.

Flotide 3kw A3/32 Plug & Play Heat Pumps For Above Ground Pools are designed purely for the small above ground pool market. Intex, Bestway & Summer Escapes pools are perfect for this heat pump

The Flotide 3kw A3/32 Plug & Play Above Ground Pool Heat Pump requires 0.68kw of power to produce 3.1kw of power out. That is roughly 10p an hour to get the equivalent of 41p of heat from the Eco 3kw Heat Pump into your pool making it so much cheaper to run than an electric pool heater.  You could even recoup the outlay in the first year in savings on your electricity bill.

The minimum Flow rate from your pool pump is 2m3/hr to start the ECO 3kw Plug & Play Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

Digital Heating Control Panel - Control Heating Up To 30°C

No ByPass Required if using small Intex pumps

The Flotide 3kw A3/32 Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible at night.

The Flotide 3kw A3/32 Plug & Play Above Ground Pool Heat Pump is suitable for pools up to 10m3

ECO Plug & Play 3kw Swimming Pool Heat Pump manual & Installation guide

Flotide Plug & Play 3kw A3/32 Heat Pump User & Installation Manual

Below are suggestions for above ground pool sizes that the ECO 3kw A3/32 Plug & Play Above Ground Pool Heat Pump is suitable for

hot splash above ground pool heat pump metal frame pool sizing

10ft x 30 inch Metal Frame Pool
12ft x 36 inch Metal Frame Pool

 

Intex Easy Set Heat Pump Sizing Hot Splash Heat Pump

8ft x 30 inch Easy Set Pool
10ft x 30 inch Easy Set Pool
12ft x 30 inch easy Set Pool
12ft x 36 inch Easy Set Pool

 

  ECO 3KW Plug & Play Heat Pump
Power Supply 220-240V 1Ph 50Hz
Heating Capacity  Air 26°C / Water 27°C 3.1KW
Heating Capacity  Air 15°C / Water 27°C 2.2KW
Input Air 26°C / Water 27°C 0.68KW
Input Air 15°C / Water 27°C 0.61KW
Current Air 26°C / Water 27°C 3.1 AMPS
Current Air 15°C / Water 27°C 2.8 AMPS
C.O.P. Air 26°C / Water 27°C 4.41
C.O.P. Air 15°C / Water 27°C 3.61
Maximum Input 0.95KW
Maximum Current 4.7 AMPS
Nominal Water Flow 2 m3/hr

Max Pool Size

(With Quality Cover)

10m3

Water Connection Size

32mm / 1.25"

Dimension (LxWxH)

mm 310 x 300 x358

Weight

24kg
  • Hot Splash Above Ground Pool Heat Pump
  • Plug & Play Heat Pump 3.75kw Heat Pump For Above Ground Pools
  • Plug Into A 13 amp Socket with Fitted RCD Plug
  • Suitable For Above Ground Pools Up To 8m3 C.O.P. Of 4
  • Solar Cover Must Be Used When Pool Is Empty & At Night
  • Digital Heat Controls 23°C To 30°C
  • Summer Season May to August / September
  • No Electrician Costs Needed To Hardwire In
  • 1 Year Warranty

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Hot Splash HS40 Plug & Play Heat Pump For Above Ground Pools is the cheapest heat pump for swimming pools in the UK. The Hot Splash Heat Pump is also lightest & smallest above ground pool heat pump in the UK. Designed to heat small above ground pools up to 8m3, the Hot Splash Intex Pool Heat Pump will transform your above ground pool into the kids favourite thing. No more blue lips, only hours of warm water fun

For 12ft & larger Intex Pools we recommend the Poolstyle Mini Plug & Play Heat Pump For Intex Pools, just click on the text to be take you to the page, to buy yours now.

Hot Splash Above Ground Pool Heat Pumps, the Intex Pool Heat Pump, require 0.6kw of power input to produce 3.75kw of power out. That is only 10p an hour to get the equivalent of 36p of heat. If used on the pool sizes we suggest the Hot Splash Pool Heat Pump will warm your above ground Intex or Bestway pool so that it can be used for hours rather than minutes. The Hot Splash Heat Pump For Above Ground Pools costs so much less to run than an electric pool heater.

Minimum Flow rate required on Hot Splash Heat Pump For Above Ground Pools is 2m3/hr

No ByPass Required

A Heat Pump heats a pool slowly but very cost effectively. It will take 2 - 3 days to go from cold to warm, but after that it is just a matter of keeping the heat up every day.

A Good Quality Solar Cover Must be Used With This Heat Pump

 


 

 

The Hot Splash Above Ground Pool Heat Pump is suitable for pools up to 8m3

Below are suggestions for above ground Intex or Bestway pool sizes that the Hot Splash Above Ground Pool Heat Pump is suitable for

hot splash above ground pool heat pump metal frame pool sizing

10ft x 30 inch Metal Frame Pool
12ft x 30 inch Metal Frame Pool
12ft x 36 inch Metal Frame Pool

 

Intex Easy Set Heat Pump Sizing Hot Splash Heat Pump

8ft x 30 inch Easy Set Pool
10ft x 30 inch Easy Set Pool
12ft x 30 inch easy Set Pool
12ft x 36 inch Easy Set Pool
12ft x 48 inch Rasy Set Pool

 

Poolstyle Mini Above Ground Pool Heat Pump - Plug & Play

by World of Pools.com
Sold out
£895.00
£695.00
  • Poolstyle Mini Above Ground Pool Plug & Play Heat Pump
  • FAST DELIVERY
  • Works When Air Temperature Is Over 10°C
  • Heat Pump For Larger Intex, Bestway & Other Above Ground Pools
  • Suits Pools Up To 18ft x 48" Round Or 18ft x 9ft Rectangular - 35m3
  • 2 Year Parts Warranty

DELIVERY: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Poolstyle Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

PRODUCT INFO:

The Poolstyle Mini Plug & Play Heat Pumps come in two sizes for the larger Intex & Bestway above ground pools. The 6kw Poolstyle Mini Heat Pump is perfect for pools up to 25m3, such as an Intex 15ft x 48" Metal Frame Pool, whilst the 8kw Poolstyle Mini Heat Pump is ideal for pools up to 35m3, such as a 18ft x 48" Metal Frame Pool. Only suitable for pool heating during the main Summer months. A Solar Cover must be used too. Buy Now For Same Day Despatch.

Poolstyle Mini Plug & Play Heat Pumps For Above Ground Pools are designed purely for the larger above ground pool market. Intex, Bestway & Summer Escapes pools are perfect for this heat pump

The minimum Flow rate from your pool pump is 2m3/hr to start the Poolstyle Mini Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

Digital Heating Control Panel - Control Heating Up To 40°C

No ByPass Required if using small Intex pumps

The Poolstyle Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible at night.

The Poolstyle Mini 6kw Above Ground Pool Heat Pump is for pools up to 25m3

The Poolstyle Mini 8kw Above Ground Pool Heat Pump is for pools up to 35m3

Below are suggestions for above ground pool sizes that the Poolstyle Mini Heat Pumps are suitable for

Metal Frame Pools

6kw - 10ft x 30 inch Metal Frame Pool
6kw - 12ft x 36 inch Metal Frame Pool
6kw - 12ft x 48 inch Metal Frame Pool
8kw - 15ft x 48 inch Metal Frame Pool
8kw - 18ft x 48 inch Metal Frame Pool

 

Easy Set Pools

6kw - 8ft x 30 inch Easy Set Pool
6kw - 10ft x 30 inch Easy Set Pool
6kw - 12ft x 30 inch Easy Set Pool
6kw - 12ft x 48 inch Easy Set Pool
8kw - 15ft x 48 inch Easy Set Pool
8kw - 18ft x 48 inch Easy Set Pool
8kw   -  21ft x 48 inch Easy Set Pool

 

Rectangular & Oval Framed Pools

8kw - 14ft x 8ft x 48 inch Pool
8kw - 18ft x 9ft x 48 inch Pool
8kw - 18ft x 10ft x 48 inch Pool
  • Thermotec Penguin 4kw Above Ground Pool Heat Pump
  • Plug & Play Straight Into A 13 amp Socket
  • Heats Above Ground Pools Up To 10m3 to 30°C
  • Summer Season Late May to August / Early September
  • 1 Year Parts Warranty

DELIVERY: Thermotec Penguin 4kw Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Thermotec Penguin 4kw Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When areturn is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

The Thermotec Penguin 4kw Above Ground Pool Heat Pump will not only be your kids favourite thing in 2023, but by the end of Summer it will be yours, too. This cute looking heat pump could save you £2500 in running costs, compared to a Bestway 3kw heater, in just one year.

Don't forget to buy a Solar Cover, they are essential and the better the quality the more money you save.

The Thermotec Penguin 4kw Heat Pump has a Minimum Flow rate requirement of 1.5m3/hr 

Digital Heating Control Panel - Control Heating Up To 30°C & No ByPass Required

All Swimming Pool Heat Pumps are designed to heat Pool water slowly but very cost-effectively. If you correctly size a Thermotec Penguin 4kw heat pump to heat your pool from cold to warm it will normally take 2 - 3 days, but following this initial heating period, it is just a matter of using the Thermotec Penguin 4kw Heat Pump to keep up the heat every day.

A Good Quality Solar Cover Must be Used With This Heat Pump

We would recommend the Thermotec Penguin 4kw Above Ground Pool Heat Pump for pools up to 10m3. If your pool is larger than this we would recommend a bigger plug & play heat pump, such as the Poolstyle Mini 6 Plug & Play Heat Pump or the Poolstyle Mini 8.