DELIVERY: Aquacheck Yellow Test Strips normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Aquachek Yellow Test Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur. 

PRODUCT INFO:  Aquacheck Yellow Swimming Pool and Spa test strips provide fast accurate results for your pool or spa. 

The Aquachek Yellow test strips test for Free Chlorine, pH, Total Alkalinity and Stabiliser

You get 50 strips in each bottle. As a guide you should check the water balance and chlorine levels in your pool or spa a minimum of twice a week and more often if the swimming pool or spa is being used frequently. FYI - On average, 2 bottles will last a pool season

We hold test strips in stock for fast next working day delivery.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Relax 5kg Stabilised Chlorine Granules (Sodium Dichloroiscyanurate-Dihydrate) are the most simple and effective choice for your swimming pool. Being virtually pH neutral it is possible to dose your swimming pool with Chlorine throughout the summer without affecting the swimming pool water pH by any noticeable degree. If you have an indoor pool, we would suggest using Un-stabilised Chlorine, commonly called Shock.

The ideal chlorine reading in your pool water is between 1 and 3 ppm, this figure can easily tested using Aquachek Test Strips. Testing your pool water daily will allow you to keep control of the swimming pool chlorine level very easily. If the reading is too low, you will simply need to add more Chlorine Granules to the pool water. Full instructions, measurements and quantities are provided on each tub.

Little and often is the most effective method of dosing your swimming pool with Chlorine, as it is a lot easier to correct under dosing than it is over dosing.

The impact of pH on efficiency of Chlorine in your Swimming Pool

Your Swimming Pool pH value has a direct impact on the ability of the Chlorine to sanitise swimming pool water efficiently. A high pH level generally means Chlorine Granules are less efficient.
Water pH of 6.5 - Chlorine in your pool is around 90% efficient
Water pH of 7.0 - Chlorine in your pool is around 75% efficient.
Water pH of 7.5 - Chlorine in your pool is around 47% efficient
Water pH of 8.0 - Chlorine in your pool is around 22% efficient.

DELIVERY: .

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Jolly Gel is one of the most popular Pool products on the market, easy to use, the Jolly Gel cube is placed in the Pool Pump Skimmer basket to remove phosphates and improve water clarity. Just one cube can treat 12,500 gallons for 2 to 3 weeks

Jolly Gel is the UK's most popular flocculant, improving your pool water clarity and removing phosphates. The gel ckubes work by placing a clear film over the filter media, this prevents the smallest particals from passing straight through the filter media. Trapping the small particals turns the clarity of the water to crystal clear within a few hours. 

Each pack contains 4 jolly Gel Cubes, enough to last at least 8 weeks on a 12,500 pool.

Jolly Gel cubes are held in stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The Rainbow offline 300C chlorine/bromine feeder can save time, provides peace of mind that chemicals are being added and reduce manual handling of chemicals. The feeder usees large or small chlorine or Bromine slow dissolving tablets to make sanitizing your new or existing pool or spa easy and automatic.

• Reduces manual handling of chemicals
• New or retro-fit
• External control valve to adjust the feed rate
• No special venting required
• Holds approx 11 x 200g tablets or 98 x 20g tablets
• Can treat pools between 25³ and 180m³

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Rainbow In-Line 320C Chlorine Feeder

Rainbow in-line chemical feeder is an easier way to manage putting either chlorine or bromine into your swimming pool. Using a feeder will reduce the amount of manual dosing which is ideal if want to ensure chloring is passing through all the time.

• Reduces manual handling of chemicals
• New or reto fit
• External control valve to adjust the feed rate
• No special venting required
• Holds approx 11 x 200g tablets or 98 x 20g tablets
• In-line feeder can treat pools between 20m3 and 180m3

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Clearwater Swimming Pool chemical feeder for most style swimming pools. More effectice way to add chemicals to your pool water. easy install and quicker to use than traditional method. Suitable for chlorine or bromine pools.

A plastic Non-Return Valve must be installed immediately before any chlorine dispensing unit

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

DPD is an abbreviation of diethyl-p-phenylene diamine. DPD tablets react with pool water containing chlorine or bromine, colouring the water sample various shades of red. The deeper the colour the higher the concentration of sanitiser.

DPD No 1 tablets by Relax are to be used with a swimming pool water testing kit

DELIVERY: Bromine test Kit - Delivery will normally take between 1-3 days

RETURNS: Bromine Test Kits can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Bromine test kit will test your hot tub spa water for the correct level of Bromine and the correct level of pH in your Pool or Spa Water

PRODUCT INFO:
Aquachek BromineTest Strips test for not only Free Bromine but also Total Hardness, pH and Total Alkalinity.
Immerse the AquaChek test strip into the hot tub or pool water then remove it immediately. After 15 seconds the reading showing are the levels of your hot tub or pool.
Ensure that you test your spa before each use and your pool at least once a week. When checking your pool test twice, from two points furthest apart. Keeping a log will assist you in understanding how your water reacts to bather loads and weather.
Each bottle has full instructions.

Testing Capabilities
pH - range of 6.2 - 8.4. Hot tub & pool water should be between 7.2 - 7.6
Free Bromine- range of 0 - 10. Hot Tub water needs to be kept between 3ppm - 5ppm & pool water between 1ppm - 3ppm
Total Alkalinity - range of 0 - 240 ppm. Hot Tub & Pool water should be between 80 - 120. 
Total Hardness - Monitor hardness levels to protect against corrosion, scale formation, cloudy water or excess foam. 

Aquachek BromineTest Strip Application Instructions
1. Dip strip into pool or hot tub water and remove immediately.
2. Hold strip level for 15 seconds, but do not shake the excess water from strip.
3. Compare Free Chlorine, pH, Total Alkalinity and total Hardness results to the colour chart on the back of the bottle.
4. Adjust water levels accordingly using appropriate chemicals.
5. Store at room temperature and remember to ensure the cap is put back on tight.

DELIVERY: Delivery for Scube 11 will normally take between 1-3 days

RETURNS: Scuba 11 can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

The Lovibond Scuba 2 Digital tester uses standard Lovibond photometer reagents.

Test Chlorine 0-6ppm, pH 6.5-8.4, TA 0-500ppm, Cyanuric 0-160ppm.

Swimming pool owners can now benefit from Lovibond technology used in public pools but at an affordable price. The Scuba II is a small, compact, easy-to-use digital water tester for the 5 most important tests: Free Chlorine, Total Chlorine, pH, Alkalinity and Cyanuric Acid.  This buoyant, watertight instrument is ideal for quick home testing (results displayed in a large viewing area within 1 minute). Supplied with sufficient tablets for a normal season’s testing, it is the ideal solution for domestic users looking for accurate, digital results.

DELIVERY: Trutest Strips - Delivery will normally take between 1-3 days

RETURNS: Trutest Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.



When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur..

PRODUCT INFO:

Aquachek Trutest Refill Test Strips - 50 strips in a bottle - We offer Fast next day delivery - Lowest price and quick delivery on the Aquachek Refill test strips. The TruTest strip reader from Aquachek is one of the most accurate ways to test your swimming pool or spa water. 

DELIVERY: Winter Closing Kit will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Winter Closing Kit can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Winter Pool Chemical Kits will provide you with the essential water treatment products to keep your swimming pool clean throughout the winter months. Winterise you pool correctly will help avoid costly repair bills and leave you with a clean pool to start the new season. Our Relax and Champion Brand Winter Swimming Pool Chemicals have been packaged to suit all styles of swimming pool.

Should you shock pool before closing?

Quick answer is Yes. It is important to balance the pH and shock the pool prior to adding winter algicides. Make sure you shock the pool one day prior to adding the winter algicide

Swimming Pool Winter Closing Kits for Closing Small, Medium and Large Pools

When closing your swimming pool for winter it is vital you protect the swimming pool as much as you can, large scale units such as heat pumps and pumps have their own manufactures guidelines you should followed for winterising. But keeping the water intact and protecting your pool liner from staining is the same across the board. The pool should be shock treated first with a powerful oxidizing agent that helps burn off any remaining impurities and leaves your pool clean and clear before you add the Winter algaecide. 

Relax and Champion Granular Shock – An easy method for shock dosing your swimming pool water. An effective way to deal with water problems and restore clear sparkling water. To ensure safe to use of your pool, maintain a free level between 1-3 ppm and a pH level of between 7.2 and 7.6

Small - Closing Pools For Winter up to 35 cubic metres - Max Pool Size 24ft x 12ft - 1kg Relax Power Shock Granules & 2 x 1 Litre Relax Concentrated Winterlong Copper Algicide

Medium - Closing Pools For Winter up to 50 cubic metres - Max Pool Size 28ft x 14ft - 2kg Relax Power Shock Granules & 3 x 1 Litre Relax Concentrated Winterlong Copper Algicide

Large - Closing Pools For Winter up to 100 cubic metres - Max Pool Size 40ft x 20ft  - 5kg Champion Power Shock Granules & 6 x 1 Litres Relax Concentrated Winterlong Copper Algicide

Please Call or email us if you need help or advice on closing your pool for the winter

PRODUCT INFO:

Aquachek Chlorine Test Strips are the best and most accurate dip test strip for swimming pools & Hot Tubs

Aquachek dip test for not only Free Chlorine but also Cyanuric Acid, pH and Total Alkalinity.

The Best Dip Test Strip For Intex Pools Is Aquachek Chlorine Test Stips

Immerse the AquaChek test strip into the hot tub or pool water then remove it immediately. After 15 seconds the reading showing are the levels of your hot tub or pool.

Aquacheck Are The Best Dip Test Strip For Hot Tubs 

Ensure that you test your spa before each use and your pool at least once a week. When checking your pool test twice, from two points furthest apart. Keeping a log will assist you in understanding how your water reacts to bather loads and weather.
Each bottle has full instructions.

Testing Capabilities
pH - range of 6.2 - 8.4. Hot tub & pool water should be between 7.2 - 7.6
Free Chlorine - range of 0 - 10. Hot Tub water needs to be kept between 3ppm - 5ppm & pool water between 1ppm - 3ppm
Total Alkalinity - range of 0 - 240 ppm. Hot Tub & Pool water should be between 80 - 120. 
Cyanuric Acid - range of 0 - 300 ppm. Cyanuric Acid, also called stabiliser or conditioner, helps reduce chlorine loss, but too much will cause "chlorine lock" and stop chlorine sanitising correctly. Pool & Hot Tub water should be kept between 30 - 50. 
 

F.A.Q: Aquacheck Pool & Hot Tub Dip Test Strips

Q: How do I use Aquachek chlorine test strips
A:To use Aquachek chlorine test strips, dip the strip into your pool or spa water for 15 seconds. DO NOT Shake off any excess water and compare the color of the strip to the color chart on the bottle to determine the chlorine and other levels.

Q: How accurate are Aquachek chlorine test strips?
A:Aquachek chlorine test strips are highly accurate and are designed to provide a quick and easy way to test chlorine levels in swimming pool and hot tub spa water. They are a reliable and cost-effective solution for monitoring chlorine levels and are especially good for Intex Pools andHot Tubs?

Q: How often should I test my pool or spa water with Aquachek chlorine test strips?
A: It is recommended to test your pool or hot tub water at least once or twice a week, or more frequently when the swimming pool or hot tub is being used a lot, such as in the main Summer months, or if you notice a change in the water's appearance or smell.

Q: Can Aquachek chlorine test strips be used in saltwater pools?
A: Yes, Aquachek chlorine test strips can be used in both saltwater and chlorine pools.

Q: How do I store Aquachek chlorine test strips?
A: It is important to store Aquachek chlorine test strips in a cool, dry place to ensure accuracy and longevity. Keep the bottle tightly sealed to prevent the strips from drying out or becoming contaminated.

DIP TEST INTRUCTRUCTIONS:
Aquachek Chlorine Test Strip Application Instructions
1. Dip strip into pool or hot tub water and remove immediately.
2. Hold strip level for 15 seconds, but do not shake the excess water from strip.
3. Compare Free Chlorine, pH, Total Alkalinity and Cyanuric Acid results to the colour chart on the back of the bottle.
4. Adjust water levels accordingly using appropriate chemicals.
5. Store at room temperature and remember to ensure the cap is put back on tight.

DELIVERY: We aim to send& Aquacheck dip test strips within 1-2 days. Stock items are normally sent same day, and delivery made between 2-3 days

RETURNS:

Aquacheck Dip Test Strips can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

When we receive the Wooden Pool, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

DELIVERY: Trutest Test Strips normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Trutest Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

 PRODUCT INFO:

Trutest Test Strips are refil strips to be used with the Trutest Reader.

50 strips in a container These are Pool and Spa Test Strips by Aquachek

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Fi-Clor Alkalinity Increaser. Swimming Pool water needs to be maintained at a Total Alkalinity of between 80 - 140ppm,this figure can easily tested using Aquachek Test Strips.

Keeping your Swimming Pool Total Alkalinity within these limits will prevent damage to your swimming equipment and ensure that the Chlorine in your swimming pool is working effectively, whilst working as a buffer for the pH level

DELIVERY: Salt & Swim Chlorinators are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Hayward Salt & Swim can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Salt & Swim by Hayward provides a DIY-friendly salt chlorinator that delivers the 3Cs of salt chlorination - Comfort, Convenience, and Cost Savings which over time will recoup the capital cost. Latest models have chlorine adjustment technology

With this salt system you will get the benefit of silky soft water, that won't turn eyes red. Using salt is a more natural approach to chlorination which also eliminates the harsh chlorine odor associated with factory-produced chlorine.

Less work is required maintain the water treatment levels using a salt system and this convenience means no more lugging heavy buckets of harsh chlorine. With salt chlorination, sanitizing pools happens automatically by converting ordinary salt into 100% pure chlorine.

Salt & Swim 3C also provides a cost savings against more over traditional chlorine. Each cell produces a ton of chlorine, but at more than half the cost of other forms of chlorine.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

SSC Salt Chlorinator for Swimming Pools up 75 cubic meters. High quality salt system that offers an alternative means to sanitize you swimming pool water. Salt Chlorinators offer a therapeutic system that does not irratate your eyes or dry your skin. Easy to install, two sizes available

Salt Chlorinator for swimming pools upto 75 cubic meters. The Flotide Salt system offers an alternatice to using harsh chemicals. Significantly more pool owners in Australia and USA use Salt systems compared to the UK because of the ease of use and health benefits. Using Salt in a pool with a salt chlorinator the salt passes through the cells of the chlorinator where the electroysis process takes place converting the salt into a chlorine gas. When dissolved in water, this becomes sodium hypochlorite.

Easy to install,the Flotide system will make maintaing your swimming pool more simple while providing clean, safe, crystal clear water

DELIVERY: Aquachek Salt White Test Strips - Delivery will normally take between 1-3 days

RETURNS: Aquachek Salt White Test Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.



When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Aquachek White Salt Test Strips are essential for Pool owners who have salt generator system. The AquaChek White titrators measure salt (sodium chloride) levels from 400 to 7,000 ppm.

Aquachek White Salt Test strips Tests for:  Salt (as sodium chloride)

These test strips are easy to use, quick and accurate. Perfect for customers who have salt generator systems. The test strips provide an accurate reading in just minutes measuring salt (sodium chloride) levels from 400 to 7,000 ppm.   Using these test strips you can ensure that your salt generator will is producing the correct amount of chlorine to keep water clean and free of contaminants.

Aquachek advise that for a clean and healthy pool, you should test the water at each end a minimum of twice a week. You get 10 in a pack

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The Lovibond PC 12 -in-1 Photometer performs 12 tests on your pool or spa water. The Lovibond PC 12 -in-1 is easy to use and gives accurate water readings. This photometer comes complete with a 1,000 test memory for easy referencing.

The PM 600 and PM 620 photometer range brings pool testing to the next level for discerning pool operators. The ergonomic, portable, waterproof design enables users to select just one unit for accurate analysis of up to 34 parameters anytime and anyplace.

The PM 600 focusses on the main pool para- meters required for balanced water including: Alkalinity, Bromine, Chlorine, Cyanuric Acid, Iron, Calcium Hardness, Copper, Sodium Hypochlorite, Ozone and pH-value. Compatible with the tried and trusted Lovibond® Tablet reagents, it is designed to be robust, reliable yet easy-to-use for any pool operator.

The PM 620 extends these capabilities to include up to 34 parameter variants from Acid Demand to Urea. Its unique design enables compatibility with Lovibond® Tablet, Liquid and Powder reagents, making it one of the most flexible and complete pool photometers available today.

Both units offer a large, back-lit graphic display to aid analysis by providing on-screen method prompts, information regarding test measurement range and reagent type and automatic countdown timers for accurate reaction periods. The internal memory is capable of storing up to 1000 results with date, time and sample ID. These results can be reviewed at any time and can be downloaded to a PC via an additional Infra-Red module (IRiM)*.

Supplied in a durable, portable case complete with accessories and space for additional reagents, both photometers provide immediate access to the accurate water analysis expected of the Lovibond® brand, clearly the best choice for water analysis