- 100 x Relax Phenol Red Rapid Tabs
Best Selling Products
- Athena GF Solar Heater For Swimming Pools
- 7,000 Litres Heating Capacity
- Easy To Install
- Great For Intex Pools
- Free Heat When The Sun's Out
- Made In Italy
- In Stock For Immediate Delivery
DELIVERY: Athena GF Swimming Pool Solar Heater Pods are sent out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: Athena GF Swimming Pool Solar Heater Pods can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.
PRODUCT INFO:
Athena Sun Domes are a solar heating system that will heat your pool and save you a small fortune in heating costs. These heaters can be installed on above ground and inground pools as a single heating source or to supplement a current heating system. The Athena Solar Heating Pods are especially effective on above ground pools such as our wooden and doughboy pools and summer pools such as Intex and Bestway. Each Dome will heat up to 7,500lt of water. If you require more than two it is more effective to install in lines of two. For more information call us on 01322554870
Just use the sizing chart below to chose the right number of domes for your pool, if you opt for more than the required amount you will see a significant difference in pool temperature. Each Athena Dome will heat up to 7,500lt, this compared to just 4,500lts with the solar pods.
Heating calculations are based on continuous sun exposure for 10 hours, which should increase the water temperature, by the following:
One heater for 2,000lt +4c, 4,000lt +2.4c, 7,500lt +1.3c
Two heaters for 2,000lt +6c, 4,000lt +3.6c, 7,500lt +2.5c, 10,000lt +1.8c
Three heaters for 4,000lt +5.4c, 7,500lt +3.6c, 10,000lt +2.7c, 15,000lt +1.7c
Four heaters for 7,500lt +4.4c, 10,000lt +4.1c, 15,000lt +2.3c
The more domes you add the more heat you will produce, adding one or two more can make a significant difference to your water tempreture.
Athena Solar Sun Dome Heaters are an extremely effective way of heating your water for free using only the solar gain available from the Sun's strong rays. As gas and electric costs continue to soar using solar heating to heat your swimming pool has become almost essential, even if it is as an additional heat source to your main heating. During the peak summer season, having solar heaters adding free heat to your water could mean not having to use your electric or gas heater for up to a month. Those savings alone make installing solar heaters a must.
Athena Sun Dome Solar Heating Sizing Chart
|
Metal Framed Above Ground Pools |
Pool Size |
Cubic Metres |
Sq Feet |
Number Of Athena Domes Suggested |
|
10ft Diameter |
4.70 |
78 |
1 |
|
|
12ft Diameter |
6.70 |
108 |
1 |
|
|
15ft Diameter |
13.50 |
176 |
2 |
|
|
16ft Diameter |
14.80 |
200 |
2 |
|
|
18ft Diameter |
22 |
254 |
3 |
| Easy Set Above Ground Pools |
Pool Size |
Cubic Metres |
Sq Feet |
Number Of |
|
8ft Diameter |
3 |
43 |
1 |
|
|
10ft Diameter |
4 |
64 |
1 |
|
|
12ft Diameter |
5.5 |
95 |
1 |
|
|
15ft Diameter |
11 |
140 |
2 |
|
|
18ft Diameter |
20.5 |
200 |
3 |
| Permanent, Steel Wall Above Ground Pools |
Pool Size |
Cubic Metres |
Sq Feet |
Number Of Athena Domes Suggested |
|
15' Diameter |
14.4 |
170 |
2 |
|
|
18' Diameter |
22.5 |
254 |
3 |
|
|
19' x 12' |
19 |
204 |
3 |
|
|
23’ x 12’ |
25 |
252 |
4 |
|
|
28' x 16' |
45 |
409 |
6 |
| Wooden Pools |
Pool Size |
Cubic Metres |
Sq Feet |
Number Of Athena Domes Suggested |
|
4m Octagonal |
14 |
150 |
2 |
|
|
5m Octagonal |
22 |
237 |
3 |
|
|
6m Octagonal |
30 |
323 |
3 |
|
|
Exercise Pool |
10 |
108 |
2 |
|
|
4m x 5.9m Pool |
23 |
248 |
3 |
|
|
4m x 6.9m Pool |
27 |
291 |
4 |
|
|
4.6m x 8.2m Pool |
36 |
388 |
5 |
| Intex Pool |
Pool Size |
Cubic Metres |
Sq Feet |
Number Of |
|
12ft x 20ft |
14.8 |
170 |
2 |
|
|
12ft x 24ft |
19.5 |
210 |
3 |
|
|
12ft x 28ft |
22.4 |
258 |
3 |
|
|
|
|
|
|
| Intex Pool |
Pool Size |
Cubic Metres |
Sq Feet |
Number Of |
|
18ft x 9ft |
14.9 |
160 |
2 |
|
|
24ft x 12ft |
26.8 |
288 |
4 |
|
|
|
|
|
|
|
|
|
|
|
|
| Inground Pools |
Pool Size |
Cubic Metres |
Sq Feet |
Number Of Athena Domes Suggested |
|
20’ x 10’ |
18.6 |
200 |
3 |
|
|
24’ x 12’ |
26.76 |
288 |
4 |
|
|
28’ x 14’ |
36.42 |
392 |
6 |
|
|
30’ x 14’ |
39.20 |
420 |
6 |
- Bromine and pH Hot Tub water Tester
- Comes with 40 tablets
DELIVERY: Bromine test Kit - Delivery will normally take between 1-3 days
RETURNS: Bromine Test Kits can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Bromine test kit will test your hot tub spa water for the correct level of Bromine and the correct level of pH in your Pool or Spa Water
- Intex Size A Filter Cartridge 29000
- Genuine Intex Manufactured Filters
- Change Regularly For Best Performance
- Discounted Prices
- In Stock For Immediate Delivery
DELIVERY: Intex Size A Filters are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Intex Size A Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Intex Size A Filters for Metal Frame Pools & Easy Set Pools should be changed very regularly, in fact Intex suggest every 2 weeks during the Summer. A clean swimming pool filter helps keep your water crystal clear and will mean using fewer chemicals.
Even if an Intex Size A filter is washed out and looks clean the microscopic holes are blocked, making the Intex filter totally useless. A blocked Intex Pool cartridge filter will increase the pressure inside the pump and quickly wear out the motor shortening the lifespan of the pump dramatically.
Replacing the Intex Size A Pool Filters as often as required could be very expensive if you had to buy them at retail prices. At World Of Poolswe can offer Intex Branded Filters at below trade prices and you do not have to buy in bulk.
Intex Size A Filters should be used with the following Intex Pumps:
58604 / 56638 / 56636
- Manufactured in USA
- Strongest Above Ground Pool Cover in UK
- Ratchet & Line Tightening System
- In Stock For Immediate Delivery
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Swimming Pool Winter Debris Covers are vital when closing your above ground pool for the season.
Stop leaves falling into your pool with a quality Debris Cover
You can add winter chemicals into the pool to keep the water free from algae but if leaves are able to get in, sink to the bottom and start to rot you will potentially have a algae issue come spring, which can eventually stain the liner if left over the winter. These round above ground pool debris covers are very simple to take on and off your pool with just a simple ratchet system and nylon cord which secures tightly to the side of the pool. When installing a debris cover, an air pillow would be strongly recommended to keep the weight and strain off the centre of the cover which can build up during the winter.These Round Above Ground Pool Winter Debris Covers are made from a non-porous material which are designed to fit securely over your above ground pool. The round Above Ground Pool Winter Debris Covers securely tighten around the side wall of the pool using a ratchet and nylon cord.Winter Debris Cover
Each Winter Debris Cover when fitted as per the manufacturers instructions will keep out leaves and rubbish during the winter months. Using a chemical winter kit or a Energy Guard Winter & Summer cover underneath the Oval & Round Above Ground Pool Winter Debris Cover will ensure that NO ALGAE grows in your swimming pool over winter.
- Above Ground Pool Oval Debris Covers
- Strongest Above Ground Pool Covers in UK
- Ratchet & Line Tightening System
- In Stock For Immediate Delivery
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.
When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.
PRODUCT INFO:
Debris Covers For Permanant Above Ground Swimming Pools. Highest quality at the lowest prices. We stock a wide range of winter covers for all sizes if swimming pools which are sent out on a next day delivery.
These Oval Above Ground Pool Winter Debris Covers are designed to fit securely over your above ground pool. Oval Above Ground Pool Winter Debris Covers securely tighten around the side wall of the pool using a ratchet and nylon cord. These Winter Debris Covers can be weighted from the eyelets with water filled bottles, to stop the cover rising over the winter
Above Ground Pool Winter Debris Covers when fitted as per the manufacturers instructions will keep out leaves and debris during the winter months. Using a chemical winter kit or an Energy Guard Winter & Summer cover underneath the Oval Above Ground Pool Winter Debris Cover will ensure that NO ALGAE grows in your swimming pool over the winter months.
It is advisable to sing an Air Pillow with the debris cover will reduce the stress on the cover and increase lifespan
- Plastica Premium Swimming Pool Winter Debris Cover
- "Premium" P Anchor & Strap Fixing
- Keeps Pool Clean In Winter
- Green / Black Finish
- UV Stabilised
- Reduces frost damage
- Minimises discolouration caused by leaves and other debris
- Woven polyethylene
- Plugs provided for holes when not in use
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica Premium Winter Debris Covers for Inground Swimming Pools with up to 75% Discount. Buy a UK manufactured Premium Winter Debris Cover for less than you would a "Cheap Import". These Premium Winter Debris Covers Come Complete With All P-Anchor & Strap Fixings. Ideal If Space Is Limited.
World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.
- 1. The quality is far superior to "cheap imports" that are being offered
- 2. We can offer the best price without import duties and currency fluctuations
- 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters
Call 01322 554 870 and order online for FREE Delivery
Plastica Premium Winter Debris Covers for inground pools are supplied with P-Anchors with a Strap. Ideally suited when space is limited the P-Anchor & Strap ensures that the Premium Winter Debris Cover is securely kept in place all Winter without taking up a lot of room around the pool edge.
Premium Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
Premium Winter Debris Covers come complete with P-Anchors to secure them into the paving around your swimming pool using a 6mm Drill Bit.
- Certikin Maple Swimming Pool Winter Debris Cover
- High Quality Cover Manufactured In The UK
- Keeps Pool water Clean Through The Winter
- Available in Green, Tan, Blue, Grey
- Helps Reduces frost damage
- Reduces discolouration of liner caused by leaves and other debris
- Woven Polyethylene with reinforced corners
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Certikin Maple Debris Cover is a high quality Winter Debris Covers manufactured to the highest standards. The cover has reinforced corners and comes with stainless stell fixings.
The Certikin Winter Debris Cover is available in four colours, Grey, Green, Tan and Blue. We have quoted standard sizes but can have this cover made to fit all size swimming pools.
A 300mm overlap is added to the cover and below sizes are pool size not cover size so the cover will come a full 300mm around the full perimeter of the swimming pool.
The Certikin Maple Debris Covers are are engineered to withstand horrendous winters and keep your swimming pool from leaves and debris over the winter months.
Maple Winter Debris Covers are made in the UK from Woven Polyethelene
When ordering the Certikin Criss Cross Winter Debris Cover add your colour choice in the comments section on the order page.
The Choices Are Grey, Blue, Green or Tan. Colour Chart Below
If you require any help or have any questions please call us on 01322 554 870. We will be happy to help.
- Plastica Deluxe Criss Cross Swimming Pool Winter Debris Cover
- Manufactured In UK By Plastica
- Keeps Pool Clean In Winter
- Straps Run Right Across Cover For Extra Strength
- Green / Black Finish
- UV Stabilised
- Reduces frost damage
- Minimises discolouration caused by leaves and other debris
- Woven polyethylene
- Plugs provided for holes when not in use
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica Criss Cross Winter Swimming Pool Debris Cover for inground swiiming pools with a Criss Cross finish offering improved strength and durability over the Deluxe Winter Debris Covers. Very tough webbing which is stitched down the full length of a cover and across its width, spaced at approximately 5' to 6' intervals. Ideal For Windy Positions Or Where A More Durable Winter Debris Cover Is Needed.
The Plastica Criss Cross Winter Debris Cover is ideal for swimming pool owners with an outdoor pool. When the summer is over it is time to close down your pool until spring, if you don't fit a pool cover at this time then your pool is likely to fill with garden debris, leaves, and other damaging objects which may well clog up the filtration system and stain the lining of the pool. Our Criss Cross Winter Debris covers are made by in the UK by Plastica and will help protect your Swimming Pool from the elements.
Call 01322 554 870 and order over the phone for FREE Delivery
Made from Woven Polyethylene and UV stabalised these covers have the added strength as the webbing is stitched down the length of the cover and across the width providing you with a very tough winter debris cover for your swimming pool.
Please contact us if you require a quote on a size that is not listed below.
If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.
Please contact us if you require a quote on a size that is not listed below.
Plastica Deluxe Criss Cross Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
- Plastica Flush Fix Swimming Pool Winter Debris Cover
- Manufactured In UK To Order
- Keeps Pool Clean In Winter
- Flush Fix Fittings For More Attractive Look
- Green / Black Finish
- UV Stabilised
- Reduces frost damage
- Minimises discolouration caused by leaves and other debris
- Woven polyethylene
- Plugs provided for holes when not in use
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica Flush Fix Winter Debris Covers are supplied with a floor fitting that sits much lower than the level of the sprung anchor holding the Winter Debris Cover. Requiring a little bit more time on installation the Flush Fix Winter Debris Covers are quite often installed on Decking as the fixings have a Brass Flush Fix Anchor Point, which is less prone to splitting wood.
The swimming pool winter debris covers supplied by World Of Pools are all UK manufactured . This is for three main reasons.
- 1. The quality is far superior to "cheap imports" that are being offered
- 2. We can offer the best price without import duties and currency fluctuations
- 3. Each Winter Debris Cover is manufactured to withstand our ever changing Winters
Call 01322 554 870 and order over the phone for FREE delivery
Flush Fix Winter Debris Covers for inground pools are supplied with Brass Flush Fix Anchors. Ideally suited when space is at a premium or on wooden decking the Brass Flush Fix Anchor & Sprung Mechanism ensures that the Flush Fix Winter Debris Cover is securely kept in place all Winter.
Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
Our Flush Fix Winter Debris Covers are made in the UK from a UV Stabilised Woven Polyethelene with a Green/Black finish. Our Debris Cover sizes relate to pool sizes but they wiil be produced 2 foot larger on the pool length and width, so when ordering just order your swimming pool size.
The Flush Fix Winter Debris Cover will also help reduce frost damage to the swimming pool and will dramatically reduce any staining from leaves and other winter debris would normally enter into the pool not only saving you money in repairs and stain removal in the Spring but will potentially prolong the life of your liner.
- Solar Pod & Solar Pod Plus Swimming Pool Heaters
- Heats Your Pool For Free
- Call Us On 01322 554 870 For Advice On How Many Needed
- Less Space Than Solar Matting
- Great On Above Ground Pools
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.
.
When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..
PRODUCT INFO:
Solar Pods & Solar Pod Plus are an ideal solar heating solution for your above or in-ground swimming pool. Solar heating using a Solar Pod is one of the most cost effective methods of heating your pool. Once you have purchased this Solar Heating System every Kilowatt of heat produced for your water is totally free. Whether you use the Solar Pods as a top up for your existing pool heater or as the only form of Heating it makes economical & environmental sense to use for your Swimming Pool. The Solar Pod Plus are an extra large, stronger and more robust system for increased performance. Please see the specification chart to calculate how many you will need for your swimming pool.
The Solar Pod Plus are 31" (780mm) square, but due to the design offer more than twice the heating capabilities of a standard solar pod. The Solar Pod Plus also has a reflective base to increase heat gain to the absolute maximum. Installing the desired number of Solar Pod Plus into a small space is very achievable. Each Solar Pod Plus has two tilting legs to help achieve the perfect angle to the Sun. Solar Pods, as with any swimming pool solar collector heating system, should be faced due South.
Each Solar Pod Plus Kit Contains:
Main Solar Pod Plus Base & Stand
Reflective Underside For Optimum Heat Gain
1.25" to 1.5" Hose Reducer
Collared Tube Adapters & Gaskets (For Larger Intex Pools)
Hose Clamps
1 x 1m Hose & 1 x 380mm Hose
Side Hose Connectors
Clear Dome
Solar Protection Cover
Solar Pod, Solar Pods Plus and Athena Sun Domes have become one of the most popular heating systems for swimming pool over the past few years as they are a quick, inexpensive and effective method for heating of your water. Each Solar Pod measures 580mm sq, Solar Pod Plus measure 780mm sq, both are easy to connect to any filtration system.
Solar Pod Plus are capable of heating 9,000 litres of water and are designed to perform to a higher standard than the Solar Pods which are capable of heating 4,500 litres of water. Solar Pod Plus are larger in size, are double skinned and contain far more internal coil to produce more heat for your Swimming Pool. We also stock Athena Sum Domes which are a very similar, but more efficient product that can heat 7,500 litres per dome.
This Solar Heating System is suitable for all styles of pools, from the summer fun Intex style pools up to Inground tiled pools. Every Pod connects to each other in a series offering the most effective Solar Heating style. Use our sizing chart on the Specification page to decide how many you will need for your swimming pool.
Specification:
- Suitable for above ground and in-ground swimming pools
- each Solar Pod is 580mm x 580mm Solar Pod Plus are 780mm x 780mm
- Coil made of strong polypropylene
- Solar Pod Dome made of strong transparent polycarbonate ( Greenhouse Effect )
- Easy Connections
- Connect multiple units for larger swimming pools
- Solar Pods Works with existing pool pumps
- Minimal tools required (Philips screwdriver and silicon lubricant)
- Solar Pods Tilt to give you more direct sunlight
- No servicing required (only when closing your pool)
- Silver base on Solar Pod Plus to generate more heat
As with all swimming pool solar heaters, sizing is an estimation and can alter depending on local climate and strength of sun.
- Tests for Free Bromine, Total Hardness, pH and Total Alkalinity
- In Stock For Immediate Delivery
- Results In Only 15 Seconds
- 50 Strips Per Bottle
- Simple To Use With Accurate Results
- Made In Canada To The Highest Specification
- Our Best Selling Test Strip
PRODUCT INFO:
Aquachek BromineTest Strips test for not only Free Bromine but also Total Hardness, pH and Total Alkalinity.
Immerse the AquaChek test strip into the hot tub or pool water then remove it immediately. After 15 seconds the reading showing are the levels of your hot tub or pool.
Ensure that you test your spa before each use and your pool at least once a week. When checking your pool test twice, from two points furthest apart. Keeping a log will assist you in understanding how your water reacts to bather loads and weather.
Each bottle has full instructions.
Testing Capabilities
pH - range of 6.2 - 8.4. Hot tub & pool water should be between 7.2 - 7.6
Free Bromine- range of 0 - 10. Hot Tub water needs to be kept between 3ppm - 5ppm & pool water between 1ppm - 3ppm
Total Alkalinity - range of 0 - 240 ppm. Hot Tub & Pool water should be between 80 - 120.
Total Hardness - Monitor hardness levels to protect against corrosion, scale formation, cloudy water or excess foam.
Aquachek BromineTest Strip Application Instructions
1. Dip strip into pool or hot tub water and remove immediately.
2. Hold strip level for 15 seconds, but do not shake the excess water from strip.
3. Compare Free Chlorine, pH, Total Alkalinity and total Hardness results to the colour chart on the back of the bottle.
4. Adjust water levels accordingly using appropriate chemicals.
5. Store at room temperature and remember to ensure the cap is put back on tight.
- No More Guessing Test Readings
- Chlorine, Bromine, pH & Total Alkalinity Tested
- Uses standard Lovibond Photometer Reagents
- Accurate Reading Every Time
- Waterproof Housing
- In Stock For Immediate Delivery
DELIVERY: Delivery for Scube 11 will normally take between 1-3 days
RETURNS: Scuba 11 can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service. . When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
The Lovibond Scuba 2 Digital tester uses standard Lovibond photometer reagents.
Test Chlorine 0-6ppm, pH 6.5-8.4, TA 0-500ppm, Cyanuric 0-160ppm.
Swimming pool owners can now benefit from Lovibond technology used in public pools but at an affordable price. The Scuba II is a small, compact, easy-to-use digital water tester for the 5 most important tests: Free Chlorine, Total Chlorine, pH, Alkalinity and Cyanuric Acid. This buoyant, watertight instrument is ideal for quick home testing (results displayed in a large viewing area within 1 minute). Supplied with sufficient tablets for a normal season’s testing, it is the ideal solution for domestic users looking for accurate, digital results.
-
- Winterizing Swimming Pool Kit for Small, Medium and Large Pools
- Copper Based Concentrate Winterlong Algicide
- Premium Pool Chemicals to keep your pool clean over Winter
DELIVERY: Winter Closing Kit will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Winter Closing Kit can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Winter Pool Chemical Kits will provide you with the essential water treatment products to keep your swimming pool clean throughout the winter months. Winterise you pool correctly will help avoid costly repair bills and leave you with a clean pool to start the new season. Our Relax and Champion Brand Winter Swimming Pool Chemicals have been packaged to suit all styles of swimming pool.
Should you shock pool before closing?
Quick answer is Yes. It is important to balance the pH and shock the pool prior to adding winter algicides. Make sure you shock the pool one day prior to adding the winter algicide
Swimming Pool Winter Closing Kits for Closing Small, Medium and Large Pools
When closing your swimming pool for winter it is vital you protect the swimming pool as much as you can, large scale units such as heat pumps and pumps have their own manufactures guidelines you should followed for winterising. But keeping the water intact and protecting your pool liner from staining is the same across the board. The pool should be shock treated first with a powerful oxidizing agent that helps burn off any remaining impurities and leaves your pool clean and clear before you add the Winter algaecide.
Relax and Champion Granular Shock – An easy method for shock dosing your swimming pool water. An effective way to deal with water problems and restore clear sparkling water. To ensure safe to use of your pool, maintain a free level between 1-3 ppm and a pH level of between 7.2 and 7.6
Small - Closing Pools For Winter up to 35 cubic metres - Max Pool Size 24ft x 12ft - 1kg Relax Power Shock Granules & 2 x 1 Litre Relax Concentrated Winterlong Copper Algicide
Medium - Closing Pools For Winter up to 50 cubic metres - Max Pool Size 28ft x 14ft - 2kg Relax Power Shock Granules & 3 x 1 Litre Relax Concentrated Winterlong Copper Algicide
Large - Closing Pools For Winter up to 100 cubic metres - Max Pool Size 40ft x 20ft - 5kg Champion Power Shock Granules & 6 x 1 Litres Relax Concentrated Winterlong Copper Algicide
Please Call or email us if you need help or advice on closing your pool for the winter
- 6 Person Hot Tub - 85" in diameter
- Reliable Heater and Powerful Pump
- Heat Retention Cover
- 140 High Powered Bubble Jets
DELIVERY: We aim to send all products out on a next working day service and hold these Purespa's in stock but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
The Purespa Bubble 6 Person Hot Tub is a great value large hot tub from Intex. This is an Inflatable Hot Tub that is reliable, efficient, strong and easy-to-use.
Intex Purespa Bubble tub is one of the best entry level portable spas available.
The Purespa Bubble has 140 high performance bubble-jets will at the base of the superior 3-ply laminated Fibre-Tech construction walls will provide you and your family with a refreshing and invigorating spa experience. The simple to use controls and easy to change cartridge filter makes keeping the water warm and clean a simple process
We can normally deliver the Purespa's on a next working day
- AquaChek Trutest Test Strips - 50 strips per bottle
- To Be Used With TruTest Analyser
- Accurate reading, With Digitised Numbered Levels
DELIVERY: Trutest Strips - Delivery will normally take between 1-3 days
RETURNS: Trutest Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur..
PRODUCT INFO:
Aquachek Trutest Refill Test Strips - 50 strips in a bottle - We offer Fast next day delivery - Lowest price and quick delivery on the Aquachek Refill test strips. The TruTest strip reader from Aquachek is one of the most accurate ways to test your swimming pool or spa water.
- Premium Inground Pool Solar Cover Reel
- Manufactured By Plastica
- Made From Aluminium
- Anti-Spin Locking Device
- In Stock For Immediate Delivery
DELIVERY:
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Premium Inground Solar Cover Reel. Suitable roller for all Domestic swimming pools with a Solar Cover from 12t wide up to 23ft wide
Solar Cover Rollers & Reels allow the easy placing and removal of swimming pool solar covers. The plastica premium solar cover reel will give you years of trouble free service.
Suitable for inground domestic pools up to 18ft wide.
The Premium Inground Solar Cover Reel has wheels to allow it to be moved away from the pool edge when not in use.
- Reel system for domestic use
- Anti-spin locking device on wheels
- Smooth action with sturdy telescopic tube
- Reel comes complete with connectors for new or existing covers
- Tubes extends from 3.66m to 5.49m
- Maximum area of cover 50 sq.m
- 2 fixed stands
- Height adjustable
- Fixed to the pool side
A swimming pool solar cover can be folded and stored but this is awkward and can damage the cover,. Most solar covers are removed and stored using a Pool reel system that is used to help manually roll up the pool cover. The reel, usually on wheels, can be rolled in or out of place. The premium Reel is ideal for most size swimming pool solar covers. held in stock for quick delivery
- Inground Swimming Pool Solar Cover Reel
- Quality, Budget Wheeled Bubble Cover Reel
- Suitable For Covers up to 6.5m
- Roll Away Solar Cover Reel System
- Ideal For Small to Medium Sized Pools
DELIVERY:
Reel systems are long and as such we need to use a specific type of delivery that takes 3 days. We aim to send all products out on a next working day service but given this product please allow upto 5 working days
RETURNS:
This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Solar Cover Reel / Roller for Inground Swimming Pools. These solar cover reels have stainless steel end stands and aluminium tubes, to ensure maximum strength with minimum weight.. The tubes are manufactured from aluminium that extend
Complete with straps needed to connect to new or existing covers.
- Above Ground Swimming Pool Solar Cover Reel
- Fits Intex, Wooden Pools, Doughboy & Bestway Pools
- Reel Extends To 18ft
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Solar Cover Reel Roller System Especially Designed For Intex, Bextway & Other Above Ground Soft Sided Metal Frame Pools.Solaris reel for above ground pools - Fitting a solar cover reel roller system on an Intex Rectangular Pool has not been an easy task in the past. Well now fitting a solar cover reel roller to an Intex Metal Frame Pool can not be easier.
The Solaris Solar Cover Reel Roller System is large enough for Intex, Bestway & similar pools 20ft Diameter. Although this reel system can accomidate fit on large pools it will not work if you use heavier 500 micron covers. If you are unsure please call to discuss
The Solaris Intex, Bestway Solar Cover Reel Roller System comes complete with straps to attach to your solar cover.
Save 48%
Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings
from £561.00
from £293.00
Plastica Replacement Swimming Pool Winter Debris Cover - No Fixings
by Plastica
Save 48%
£561.00
£293.00
- Plastica Replacement Winter Debris Covers
- No Fixings - 25% Cheaper Way To Replace Your Old Cover
- Manufactured In UK By Plastica
- Keeps Pool Clean In Winter
- Green / Black Finish
- UV Stabilised
- Reduces frost damage
- Minimises discolouration caused by leaves and other debris
- Woven polyethylene
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
The Plastica Replacement Winter Debris Covers are manufactured by Plastica from the same woven polyethylene as their standard Covers.
Plastica Replacement Winter Debris Cover For Deluxe, Flush-Fix Or Premium Inground Winter Debris Covers. These Swimming Pool Winter Debris Covers Come With STRAPS ONLY And Are Perfect If You Need To Replace Your Existing Winter Debris Cover But Have All The Fixings Already.
The Plastica Replacement Winter Debris Cover is made from the same material as the Deluxe, Premium & Flush-Fix Winter Debris Cover. The only difference is that they come with STRAPS ONLY and have NO FIXINGS.
Call 01322 554 870 and order over the phone for FREE Delivery
If your Winter Debris Cover has been damaged but you still have the fixings this option will save you up to 25% on our already discounted prices.
The Sizes for the Plastica Replacement Winter Debris Covers shown are pool sizes and the covers will be 1ft larger on all sides.
If your pool size is not shown please call 01322 554 870 for a quote.
Once you place your order you will be contacted to find out what spacing your current straps are so that the Replacement Winter Debris Cover can match exactly.
Strap spacing is normally between 1m - 1.5m on the width and 1.2m - 1.5m along the length. If you need straps spaced closer there will be a surcharge. Please call 01322 554 870 for a quote.
- Leading Edge Solar Cover Towing Kit
- Allows One Person To Easily Pull Solar Cover Onto Pool
- Manufactured In The UK
- Easy To DIY Install
- Choose Factory Fitted Option When Ordering A New Cover
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
A Leading Edge can easily be added to your solar cover. This upgrade will enable you to pull the solar cover off your pool without needing more than one person. It is essential that a solar cover is used to its maximum but when it becomes a problem to pull the cover on and off, it is sometimes left off for convienence. Using a leading edge takes away the hassel and will improve the life span of the your solar cover.
Solar Cover Leading Edge Towing Kits make placing and removing your Swimming Pool Solar Cover a simple one person job. The tow kit can be added to new covers or retro fitted to exsisting solar covers. We offer this as a DIY or with new solar cover orders we can also have this factory fitted. Lead times for orders with a factory fitted tow bar will take 5 working days from when the order is placed.
We can also offer the leading edge in black for those pool owners with an energyguard cover
Easy to fit using plastic connectors (poppers) for our DIY option or if you are ordering the leading edge with a new Solar Cover you can choose to have it fitted at the factory
Range of Swimming Pool Fixings for Debris Covers
Deluxe Spring & P Anchor
Flush Fix Spring
Flush Fix Brass Anchor
Installation Tool For Flush Fix
Premium P Anchor
Red Plastic Plugs
4 Bar Buckle
D Ring
- S1 Intex Purespa Filter
- 7.3cm high x 10.8cm wide
- Fits Massage & Bubble Purespa Hot Tubs
- Change Every Two Weeks For Optimum Performance
- Cheaper In Box Of 6 Twinpacks
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Intex Pure Spa Filters For The Intex PureSpa Bubble or Jet Massage Hot Tubs. S1 / 29001 E
The cheapest way to buy the filters is in a box of 6 x twinpacks
7.3cm high x 10.8cm wide
Intex recommend changing the filters every two weeks to ensure correct filtration.Intex Purespa Hot Tub
Suitable for both the Intex Purespa Bubble Hot Tub and Intex Pure spa Jet Therapy Hot Tub
- Intelliflo VS2-HR1 - PAC-100-0353 Measured in speed RPM's
- Intelliflo SW5P6R VS-HR1 - For Salt water pools measured in RPM's
- Lower Speeds = Less Noise
- Variable Speeds - 0.5HP up to 3HP (400 - 3450RPM)
- Reduced energy consumption of up to 90%
- Eas to Program and Operate
- Energy saving, lower electricity bill and fast payback (1-3 years)
- Shorter filter back washes = Less Money Spent On Heating Fresh Water
- Longer Pump life expectancy - More Savings
DELIVERY: Pentair Intelliflo Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Pentair Intelliflo Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.
PRODUCT INFO:
Pentair Intelliflo VSD built with Sta-Rite 5P6R wet end, reduces your running costs offering payback in first two years. Dramatic reduction in noise and the fact that the Pentair Intelliflo reduces your running cost so much, paying for itself in less than 3 years on a standard extended summer pool to less than 2 years if used on a small commercial, public pool or frequently used domestic in-door pool. Pentair Intelliflo has an extremely low operation noise and high indirect impact in the reduction of CO2 emissions.
Pentair have added built-in features to protect the Intelliflo from prime flow impedance, over heating, freezing and under or over voltage. Pentair Intelliflo is an Eco Efficent pump that will slash you electricity bills by 30 - 90%. Manufactured to be multi-purpose it can be used on several applications, the first being pool filtration, another being used to boost power for cleaning as well as creating water features or waterfalls in the pool and also reducing the maintenance cost of your swimming pool.
Pentair Intelliflo is the new standard of Swimming Pool Pumps. Pentair Intelliflo monitors and controls and adjusts to a range of demands and different pool conditions. The Intelliflo is a variable speed pump which Watts/Amps varie according to the pressure and flow of your swimming pool. Pentair have made built-in protections to the Interlliflo being loss of prime flow impedance, thermal overload, freezing protection and under and over voltage. Pentair Intelliflo is a Eco Efficent product that will reduce energy consumption by 30 - 90%. Intelliflo is manifactured to be versatile, on its own Pentair Intelliflo can be used for several applications (filtration, cleaning, waterfalls, etc.) reducing the maintenance cost of your swimming pool. The noise level on the Pentair Intelliflo is unnoticed when operating, it is quiet as human whisper.
Pentair Intelliflo Advantages Add More Value For Money!
- Thanks to its permanent magnet motor and the fact that it is totally enclosed fan cooled (TEFC) design, which means there are no touching parts rubbing against each other. This means the pentair pump is the quietest pump on the planetever made. At typical speeds you can hardly hear it's operating
- IntelliFlo permanent magnet motor produces far less heat and vibration that the standard self priming induction motor pumps. This not only results in less strain & wear on the components of the pump, but also on other equipment. Furthermore on investigating the main faults we regular hear with the induction pump it would be overheating, freezing and voltage irregularities. The intelliflo pumps has a motor that protects itself from damage by adjusting it's voltage variations as well as reducing its speed to prevent motor over heating. The result is you can expect a dramatically longer life and even greatre return on your investment.
- The Intelliflo can also adjust to new features and equipment without changing the pump. You can add a solar system or water feature or even change your filter by simply pushing a button to set the optimum speed to operate at the lowest energy use. Your savings are maintained even as your swimming pool system changes
- The Intelliflo has the ability to manage water features by altering the performance of the pump. Want to add height to deck jets or fountains? want to increase the water flow to waterfalls or avanishing edge you simply increase or decrease pump speed with a touch of a button to adjust the demand. You manage the sights and sounds of your back garden retreat while driving energy cost down to new lows
- Certikin Aquaspeed Swimming Pool Pump
- Ideal For Salt Water Pools, 316 High Grade Steel
- Clear lid for easy inspection of the pump basket.
- 2" quick connect unions
- Hydraulically efficient impellor and diffuser design reduces Running Costs
DELIVERY: Aquaspeed New Generation Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases
RETURNS:
Aquaspeed Swimming Pool New Generation Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Certikin Aquaspeed Swimming Pool Pumps
Certikin Aquaspeed New Generation Swimming Pool Pumps are suitable for both Pools and Spa filtration systems. The Aquaspeed Pump is self priming and is available in 11 sizes ranging from .5hp (.25kw) through to 3hp (2.2kw). This is a quiet running and energy efficient pump that will work with your filtration system. We can assist in making sure you have the correct size to match your filter. In Stock and available for next working day delivery
Certikin Aquaspeed Pumps have a large capacity strainer basket that has a high pressure clear screw on lid for ease of use when servicing or inspecting. These pumps are available in single or 3 phase and can be used in salt chlorine pools
There is also a 2 speed 1.5HP (1.1kW) single phase version available.
Features:
- Solid clear pump lid for easy inspection of the pump basket.
- Secondary seal for added pump motor protection.
- Comes complete with 2" quick connect unions for ease of installation.
- 316 high grade mechanical seal
- Suitable for salt chlorinated swimming pools
- Hydraulically effcient impellor and diffuser design for maxium hydraulic output whilst minimising turbulence
- Single piece fibreglass filled pump body to ensure maximum strength and durability
- UV stabilised and corrosion resistant pump body
- TUV Approved
|
MODEL |
PHASE |
WEIGHT kg |
PORT SIZE |
|
AQUASPEED 0.50 HP |
1 |
13 |
2" (63MM) |
|
AQUASPEED 0.75 HP |
1 |
14 |
2" (63MM) |
|
AQUASPEED 1.00 HP |
1 |
16 |
2" (63MM) |
|
AQUASPEED 1.50 HP |
1 |
17 |
2" (63MM) |
|
AQUASPEED 2.00 HP |
3 |
20.5 |
2" (63MM) |
|
AQUASPEED 3.00 HP |
3 |
20.5 |
2" (63MM) |
- Intex Pump & Cartridge Filter #28604, #28638 & #28636
- 530 Gallon / Hour, 1000 Gallon / Hour & 1500 Gallon / Hour
- Best Made Above Ground Pool Cartridge Filter
- Suits Intex & Other Above Ground Pools
- In Stock For Immediate Delivery
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Intex Pumps & Filters can be used with any wet set above ground swimming pool. Intex Pumps are very easy to install, just simply hook up water inlet and outlet and plug in. The Intex Pumps are held in stock and can be shipped next day, they also come with a 1 year warranty with intex themselves.
Intex Filter Pumps #28638, #28636, #28604 can be used with Intex Wet Set, Easy Set, Metal Frame and Intex Ellipse Pools. The Intex Pumps come with a limited 1 year warranty.
Upgrading your intex filter pump to a higher spec or even to an Intex Sand Filter is especially important if you are looking to add a heat pump or solar domes.
Research shows that intex filter pumps may need replacing 2 or 3 times on an intex pool life time, so therefore we can offer intex branded replacement filter pumps for a fraction of the retail price. Intex Filter Pump does not keep the floor or walls clean, they will only keep the water clean from suspended water particles and circulate the water for the chemical to work. To clean the floor and walls a vacuum is needed.
Glass Media Benefits
- Has a much longer life than sand, which needs to be replaced every 4-5 years.
- Sand incubates bacteria whereas Glass media eliminates bacteria.
- Better filtration performance than with Sand
- Can be used in all standard Sand Filters
DELIVERY: We hold glass media in-stock so offer fast next working day delivery if ordered before 1pm. We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
20kg Bags of quality Swimming Pool Glass Media. Glass Media outlasts traditional sand media providing better filtration and longer lasting so reducing media change. Grade 1 Glass .5 - 1mm. Fast next working day delivery on this product
- Aquachek Chlorine Test Strips For Swimming Pools & Hot Tubs
- Tests for Free Chlorine, Cyanuric Acid, pH and Total Alkalinity
- Aquachek The Best Dip Test Strip For Hot Tubs
- In Stock For Immediate Delivery
- Results In Only 15 Seconds
- 50 Strips Per Bottle
- Simple To Use With Accurate Results
- Our Best & Most Accurate Dip Test Strip
PRODUCT INFO:
Aquachek Chlorine Test Strips are the best and most accurate dip test strip for swimming pools & Hot Tubs
Aquachek dip test for not only Free Chlorine but also Cyanuric Acid, pH and Total Alkalinity.
The Best Dip Test Strip For Intex Pools Is Aquachek Chlorine Test Stips
Immerse the AquaChek test strip into the hot tub or pool water then remove it immediately. After 15 seconds the reading showing are the levels of your hot tub or pool.
Aquacheck Are The Best Dip Test Strip For Hot Tubs
Ensure that you test your spa before each use and your pool at least once a week. When checking your pool test twice, from two points furthest apart. Keeping a log will assist you in understanding how your water reacts to bather loads and weather.
Each bottle has full instructions.
Testing Capabilities
pH - range of 6.2 - 8.4. Hot tub & pool water should be between 7.2 - 7.6
Free Chlorine - range of 0 - 10. Hot Tub water needs to be kept between 3ppm - 5ppm & pool water between 1ppm - 3ppm
Total Alkalinity - range of 0 - 240 ppm. Hot Tub & Pool water should be between 80 - 120.
Cyanuric Acid - range of 0 - 300 ppm. Cyanuric Acid, also called stabiliser or conditioner, helps reduce chlorine loss, but too much will cause "chlorine lock" and stop chlorine sanitising correctly. Pool & Hot Tub water should be kept between 30 - 50.
F.A.Q: Aquacheck Pool & Hot Tub Dip Test Strips
Q: How do I use Aquachek chlorine test strips
A:To use Aquachek chlorine test strips, dip the strip into your pool or spa water for 15 seconds. DO NOT Shake off any excess water and compare the color of the strip to the color chart on the bottle to determine the chlorine and other levels.
Q: How accurate are Aquachek chlorine test strips?
A:Aquachek chlorine test strips are highly accurate and are designed to provide a quick and easy way to test chlorine levels in swimming pool and hot tub spa water. They are a reliable and cost-effective solution for monitoring chlorine levels and are especially good for Intex Pools andHot Tubs?
Q: How often should I test my pool or spa water with Aquachek chlorine test strips?
A: It is recommended to test your pool or hot tub water at least once or twice a week, or more frequently when the swimming pool or hot tub is being used a lot, such as in the main Summer months, or if you notice a change in the water's appearance or smell.
Q: Can Aquachek chlorine test strips be used in saltwater pools?
A: Yes, Aquachek chlorine test strips can be used in both saltwater and chlorine pools.
Q: How do I store Aquachek chlorine test strips?
A: It is important to store Aquachek chlorine test strips in a cool, dry place to ensure accuracy and longevity. Keep the bottle tightly sealed to prevent the strips from drying out or becoming contaminated.
DIP TEST INTRUCTRUCTIONS:
Aquachek Chlorine Test Strip Application Instructions
1. Dip strip into pool or hot tub water and remove immediately.
2. Hold strip level for 15 seconds, but do not shake the excess water from strip.
3. Compare Free Chlorine, pH, Total Alkalinity and Cyanuric Acid results to the colour chart on the back of the bottle.
4. Adjust water levels accordingly using appropriate chemicals.
5. Store at room temperature and remember to ensure the cap is put back on tight.
DELIVERY: We aim to send& Aquacheck dip test strips within 1-2 days. Stock items are normally sent same day, and delivery made between 2-3 days
RETURNS:
Aquacheck Dip Test Strips can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
When we receive the Wooden Pool, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.
- Aquachek Pool & Spa Refill Strips
- Only For use With Trutest Test Strip Reader
- 50 Strips in a Packs
- In Stock For Immediate Delivery
DELIVERY: Trutest Test Strips normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Trutest Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Trutest Test Strips are refil strips to be used with the Trutest Reader.
50 strips in a container These are Pool and Spa Test Strips by Aquachek
- Relax Energize Sachet for Spas and Above Ground Pools
- 5 X 30g One Dose Sachet to Restore Water Clarity
- Oxygen Sanitiser Without Shock Chlorination
- Also Suitable for Small Pools
DELIVERY: Relax Energize Sachet will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Relax 30g Energize sachel can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Relax Energize Sachets in a small one dose 30g sachet. The Energize sachet will help provide water clarity without shock-chlorinantion.
The Relax Energize Sachet is an Oxygen based shock treatment that helps eliminate water contaminants
Oxygen based sanitisers also restore dull & cloudy water. One 30g Sachet will give a single dose to a 1,500 litre Spa or Small Pool
10 Piece Total Hot Tub Starter Kit Contains:
- 1kg Small Chlorine Tablets
- 1.5kg pH Minus
- 1kg pH Plus
- 0.5 litre Filter & Cartridge Cleaner
- 0.5 Litre Spa Clarifier
- 0.5 Litre Spa No Foam
- 2 x 30g Energize Sachets
- Floating Tablet Dispenser
- Test Strips
- Hot Tub Care Guide
Lasts 3-6 Months
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
- Fi-Clor Total Alkalinity in your swimming pool use TA or Total Alkalinity Plus whilst the swimming pool pump is running.
- To REDUCE Total Alkalinity in your swimming pool use pH Minus when the filtration pump is turned off.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Fi-Clor Alkalinity Increaser. Swimming Pool water needs to be maintained at a Total Alkalinity of between 80 - 140ppm,this figure can easily tested using Aquachek Test Strips.
Keeping your Swimming Pool Total Alkalinity within these limits will prevent damage to your swimming equipment and ensure that the Chlorine in your swimming pool is working effectively, whilst working as a buffer for the pH level
- Intex 2.2kw Electric Heater
- Not To Be Used With Extension Lead
- Safety Internal Flow Switch
- Anti-Tilt Cut Out Switch
- 2.2 kW Heating Element
- Plugs Straight Into An RCD Protected Socket
- Connects Inline To Intex Or Bestway Pools
- Multi Selection Controls
- Easy To Install
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Not To Be Used With Extension Lead
Swimming Pool Heaters can be a big expense, but they do work out great value as it allows the family to use the pool so much more, even on days when it is not so warm. With an Intex Swimming Pool Heater you will be paying a fraction of the cost of a regular swimming pool heater but will be getting a product that is just as well made.
Intex swimming pool heaters are specifically designed for the Intex & Bestway style of pools and run off an RCD protected 13-amp standard household socket. The big difference between the Intex pool heater and other cheaper pool heaters are the higher quality components used in the Intex Swimming Pool Heater and the greater safety functions that are inside.
Swimming Pool Heaters should be safe, functional, reliable and easy to use; sadly some of the cheaper models on the market are not. The Intex 2.2kw Swimming Pool Heater has safety features that would normally only be found on heaters that cost £100s of pounds more. We think they are so good that we would recommend it to anybody who has an 8ft, 10ft or 12ft pool. You will not regret buying an Intex 3kw Swimming Pool Heater.
- Hayward Whaly Automatic Suction Swimming Pool Cleaner
- Works On Above Ground Pools & Flat Bottomed Pools
- Requires 0.75hp Pump
- Easy To Install
- Works On All Pool Finishes
- 2 Year Warranty
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Hayward Whaly Pool Cleaner will automatically clean your swimming pool and looks fun while doing so too.
Hayward Whaly Automatic pool cleaner is designed to efficiently clean your swimming pool while still looking fun. It is one of our most popular and best selling automatic pool vacuums and cleaners.
With all Automatic Cleaners they work off your filtration system creating suction to clean your pool, Hayward have designed the suction to enable a motor to create the cleaner to move around your Swimming Pool surface so it can do the job for you.
2 Year Warranty
- Triangular Vacuum Head Designed For Liner Pools
- Bristles Move Dirt On Liner
- Large Triangular Head Picks Up Lots In One Pass
- Cleans You Pool Floor Quickly
- Triangular Shapes Aides Corner Cleaning
DELIVERY: Swimming Pool Vac Heads are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Swimming Pool Vac Heads can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Deluxe contoured liner vacuum head is ideal when cleaning your Swimming Pool manually. This vac head fits to standard telescopic pole and can use with ease. The Mega Triangular Vacuum Head is a simple design which works great not only in the middle of your pool has specifically designed to tackle the corners where debris sometimes collect.
Deluxe Mega Triangular Vacuum Head is used for cleaning and vacuuming your Swimming Pool floor it's triangular contoured shape makes it easier to reach in your pools corners and fantastic for people who have a hopper shape floor. On the underneath Mega have produced the vacuum with brushes to help clean your Swimming Pool surfaces.
- Hayward Magic Clean Automatic Suction Pool Cleaner
- Works On Above Ground Pools & Flat Bottomed Pools
- Requires 0.75hp Pump
- Easy To Install
- Works On All Pool Finishes
- 2 Year Warranty
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Magic Clean ladybird Automatic Pool Cleaner from Hayward. Pretty, but very efficient. Cleaning the pool does not have to be boring. The Pool Pump needed to drive Automatic Pool Cleaners should be a minimum of 0.75hp. These Hayward Cleaners are well made and come from a top pool cleaner manufacturer. If you are looking for a well made cleaner just above the budget range then these Hayward Cleaners are ideal. This is suitable for flat bottom pools only.
Hayward Magic Clean Ladybird automatic swimming pool cleaner is simple to use but exceptionally efficient.
The Magic Clean Ladybird automatic pool cleaner attaches to your swimming pool skimmer or vacuum point creating suction for it to be able to hoover your Swimming Pool surface.
- Vacuum Head Designed For Concrete & Tiled Pools
- Flexible 12 inch Body
- Allows You To Cover Huge Areas Quickly
- Clear You Pool Floor Perfectly
- Flexible Body For Curved Floors
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
The 12” vacuum head is flexible in design allows it to mold easily to the shape of your pool meaning the you can clean right into the tightest corners, while the wheels allow it to glide easily over the pool floor with minimal effort. Ideal for tiled and concrete swimming pools.
Some tiled or concrete swimming pools have curved wall and sloping floors, the deluxe vac head is ideal for these types of swimming pools. The flexible vacuum head allows it to flex and take shape of any bend and then is further complemented with free flowing wheels which enables it to be pushed effortlessly across the swimming pool. The vacuum head has no issues in climbing slopes or reaching in between the angles which run between the floor and walls on a Hopper shape swimming pool
- Swimming Pool Vacuum Yoke Head Assembly For Telescopic Pole
- Connects To 95% Of Swimming Pool Vacuum Heads
- Fits Into Standard UK Telescopic Pole
- Cheaper Than Buying New Vac Head
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Replacement handle for a vacuum head. When cleaning you Swimming Pool you connect your Vaccum Head to your Complock Pole to be able to clean you pool floor.
Cleaning your Swimming Pool is important and when you use a Vaccum Head you will need a 'Yoke Assembley' to attach your pole to you vaccum. Many vaccums have a 'Yoke Assembley' included in the purchase of a new vaccum but these are a key essential that made need replacing instead of purchasing a brand new Vaccum Head.
- Swimming Pool Vacuum Head For Liner & Tiled Pools
- Adjustable Suction rate
- Great For Collecting Stubborn Debris
- Allows You To Cover Huge Areas Quickly
- Clear You Pool Floor Perfectly
- Good On All Sized Pumps
DELIVERY: Deluxe vac heads are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Deluxe Vac Head can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
The deluxe vacuum head is used for cleaning and vacuuming the pool floor, it has adjustable suction dials that allow you to change the suction and force of the head.
The Deluxe Vacuum Head has a special design for fast and easy cleaning, with it's long-wearing brushes being able to quickly loosen tough algae spots from the pool. The shape of the head allows deeper cleaning and gives you a much easier experience when cleaning your pool.
- Heavy Duty Shallow Leaf Net
- Fits All Telescopic Poles
- Used For Skimming Leaves FromThe Pools Surface
- Easier To Use Than Deeper Nets When Skimming Surface
DELIVERY: Shallow Leaf Nets are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Shallow Leaf Nets can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Heavy Duty Shallow Leaf Net, ideal for collecting leaves and floating debris from Swimming Pool's water surface.
The Heavy Duty Shallow Leaf Net skims across your water surface picking up leafs and laying debris. Fantastic to remove debris before the use of your Swimming Pool.
- Heavy Duty Leaf Net
- Fits All Complock Poles
- Has A BladeTo Scoop Leaves Off Pool Floor
- Massive Bag Holds Huge Amount Of Debris
DELIVERY: Swimming Pool Nets are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Swimming Pool Nets can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur..
PRODUCT INFO:
The Heavy Duty Deep Leaf Net is suitable for collecting leaves and debris from the bottom, top and even sinking debris in a swimming pool. Using a heavy Duty Leaf Net will make clearing the water easier and the leaf net should last longer. By using a Leaf net you will reduce the amount of leaves clogging up the strainer basket and leaves can sometimes leave a stain on the swimming pool liner
Heavy Duty Deep Leaf Nets are perfect for gathering leaves and debris from the bottom of all types of Swimming Pools. No matter what your pool floor is whether it is a contant depth or hopper shape this Deep Leaf Net will be fantastic for gathering and removing all unwanted debris. Its designed with a lip to help flick debris and leafs into the net while just pushing the telescopic pole along the floor.
- Aluminium Backed Swimming Pool 18" Wall Brush
- For Use In Liner & Tiled Pools
- Fits All Telescopic Poles
- Curved Design Suits All Pools
- Sturdy Bristles
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Swimming pool wall brush with aluminium back. The brush is 18" long so ideal for brushing the pool walls and floor and has the aluminium backing for added strength
- Swimming Pool Metal Rimmed Deep Leaf Net
- For Use In Tiled Pools
- Fits All Telescopic Poles
- Deep Bag Picking Debris Off The Pool Floor
- Very Heavy Duty
DELIVERY: Swimming Pool Deep Leaf Nets are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Metal Rimmed Deep Leaf Nets can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
.
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
PRODUCT INFO:
Metal Rimmed Deep Leaf Net is ideal for collecting debris from the bottom of any domestic swimming pool. The locking device is a standard fit which is compatible through out the industry for any complock or telescopic pole.
Metal Rimmed Deep Leaf Net is ideal for collecting debris from the bottom, top and even sinking items of any domestic swimming pool. The locking device is a standard fit whish is compatible through out the industry for any complock or telescopic pole.
Pole is not included!
- For Use In Liner & Tiled Pools
- Fits All Telescopic Poles
- Curved Design Suits All Pools
- Sturdy Bristles
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Curved Wall Brushes are ideal for cleaning the floor and walls of all dirt and marks, which your filtration does not remove.
The Curved wall Brush will fit all telescopic poles
- Lightweight, But Strong Ribbed Aluminium
- 3 Piece 1.5m to 4.57m Pole
- Standard End Fittings
- Will Fit All Standard Brushes & Nets
- Two Lengths To Suit All Pools
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Quality aluminium telescopic pole for swimming pool maintenance. The telescopic pole will fit to your pool brush, net or vacuum head enabling you to maintain your pool. We stock a 3 piece pole that extends from 1.5m or 5ft to 4.57m or 15ft. This is ideal for small pools to medium sized pools
- Intex Deluxe Maintenance Kit 28003 2022 Model
- Requires an Intex filter pump with a minimum flow rate of 800 gph
- Vacuum sucks debris off the pool floor and through the filter
- Attaches to the outlet connector in the pool with a 7.5m hose
- Durable and deep mesh skimmer net
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Intex Deluxe Maintenance Kit 28003
Intex deluxe maintenance 29003 kit contains a telescopic pole for pools with higher sidewalls and larger diameters. In addition, the kit contains a vacuum that attaches to your suction inlet or skimmer. The vacuum collects all the debris you have on the surface of your pool or the bottom. Furthermore, the kit contains a deep polyester mesh net.
- Hayward Tiger Shark Robotic Swimming Pool Cleaner Quick Clean
- Fast Clean Robotic Pool Cleaner, Cleans Pool Floor & Walls
- Recommended pool size: up to 80 Square Metres
- Cleaning Speed: 18meter/minute
- Work Cycle: 2 hours
- Filter Porosity: 5 microns
- Dimensions: 410 x 410 x 280mm
- Floating Cord Length: 18Meters
- Warranty: 2 Years
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.
RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Tiger Shark QC Robotic Pool Cleaner is a fast powerful robotic pool cleaner that will clean your pool in a matter of hours, climbing the pool slope, walls and collecting all the debris from the pool floor.The tiger Shark is lightweight, even though it has two very strong and efficient motors, as only the top robotic pool cleaners do.
The QC Tiger Shark is similar in all aspects the standard Tiger Shark but will clean your pool in two hours. To make the cleaning process even easier the Tiger Shark uses removable cartridges. The two powerful motors, one for the tracks and one for the powering the suction, allow it to clean your pool efficiently and quickly. The robot can be equipped with PVC gel rollers for liner swimming pools or with high grip foam rollers for tiled swimming pools. The Tiger Shark cleans the pool floor and the pool walls.
Please choose the correct Tiger Shark for your Pool. Standard PVC Rollers can be used on most pools and are more hard wearing. Foam Rollers are more suited to Ceramic, Tilled & Concrete Pools
- Threaded Socket MT/P
- White PVC
- Socket Accepts 1.5 Inch Pipe
- Male Thread 1.5" BSP
- In Stock For Immediate Delivery