DELIVERY:

Reel systems are long and as such we need to use a specific type of delivery that takes 3 days. We aim to send all products out on a next working day service but given this product please allow upto 5 working days

RETURNS:

This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Quality Solar Cover Reel Inground Swimming Pools. We offer two styles of reel systems that are excellent value for money. Designed for swimming pools up to 6.5m. These solar cover reels have stainless steel end stands and aluminium tubes, to ensure maximum strength with minimum weight.. The tubes are manufactured from aluminium that extend. Complete with straps needed to connect to new or existing covers.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

We offer three kits to allow you to connect your intex or Bestway Pool to a swimming pool heat pump that has a 1.5" BSP Female Thread connection for water in and out.

Intex or Bestway 2" Threaded Hose Connection Kit for Heat Pumps With 1.5" Female Threaded Connection

Content:

• 2 x Threaded Adaptors
• 1 x Intex Hose
• 1 x PTFE Tape

Intex 1.5" / 38mm Flexible Hose Connection Kit for Heat Pumps With 1.5" Female Threaded Connection

Content:

• 2 x Threaded Hosetails
• 1 x 3m 1.5" / 38mm Flexible Hose
• 1 x PTFE Tape
• 2 x Jubilee Clips

Intex 1.25" / 32mm Flexible Hose Connection Kit for Heat Pumps With 1.5" Female Threaded Connection

Content:

• 2 x Threaded Hosetails
• 1 x 3m 1.25" / 32mm Flexible Hose
• 1 x PTFE Tape
• 2 x Jubilee Clips

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The easy set debris cover is design for keeping debris out of your pool however it is NOT a safety cover. The cover has rope teathers allowing you to tie the cover to the pool to sensure it does not blow off in high winds. In addition the cover helps preserve heat overnight, but does not help heat the pool itself.  

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO: Intex Swimming Pool Debris Cover to help avoid debris going into the swimming pool

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Intex PureSpa Spa adjustable Model 28502E for Intex Spas

Brand New Intex PureSpa adjustable Seat. The PureSpa seat allows children and shorter people to sit  safely & comfortably in the spa, raising a persons height with two different height options: 3" (7.5cm) or 5 7/8 (15cm)

Includes

    1 - Intex PureSpa adjustable seat - Model 28502

For all warranty issues on the Intex PureSpa Please call the Intex service centre on 0844 5617129

ONCE THE BOX IS OPENED AND THE SEAL IS BROKEN YOU WILL NOT BE ABLE TO RETURN THIS ITEM FOR A REFUND DUE TO HYGIENE REASONS.

DELIVERY: H Filters from Intex are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Type H Filters can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Intex Size H Filter

Intex Filters for Metal Frame Pools & Easy Set Pools should be changed very regularly, in fact Intex suggest every 2 weeks during the Summer. A clean swimming pool filter helps keep your water crystal clear and will mean using fewer chemicals.

Even if an Intex filter is washed out and looks clean the microscopic holes are blocked, making the Intex filter totally useless. A blocked Intex Pool cartridge filter will increase the pressure inside the pump and quickly wear out the motor shortening the lifespan of the pump dramatically.

Replacing the Intex Pool Filters as often as required could be very expensive if you had to buy them at retail prices. At H2oFun we can offer Intex Branded Filters at below trade prices and you do not have to buy in bulk.

designed for use with Intex filter pump item number: 28601/28602 

PRODUCT INFO:

Inver Warrior Robotic Pool Cleaner M45 with AI-Wireless Technology

Features:

• For all types of pools 
• Cleans Floor only / Floor + Wall + Waterline
• 3.2Lt filter basket
• Navigation -  i-Mapping + Freedrive AI
• Run time 6 hours
• Cleaning Time 0.5 / 1 / 2 hours
• AI Auto Scheduling Every 1/2/3 days
• Soft Rubber treads
• Optimized algorithms for Full Coverage, intelligent obstacle traversing
• Next Day Delivery

F.A.Q: Inver Warrior Robotic Pool Cleaner M45

PDF DOWNLOADS & VIDEOS: 

DELIVERY: We aim to send Warrior M45 on a next working day service

RETURNS: All Warrior M45 Cordless Robotic Pool Cleaners can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Inver Warrior Robotic Pool Cleaner M60 with AI-Wireless Technology

Features:

• For all types of pools 
• Cleans Floor only / Floor + Wall + Waterline
• 3.2Lt filter basket
• Navigation -  i-Mapping + Freedrive AI
• Run time 6 hours
• Cleaning Time 0.5 / 1 / 2 hours
• AI Auto Scheduling Every 1/2/3 days
• Soft Rubber treads
• Optimized algorithms for Full Coverage, intelligent obstacle traversing
• Next Day Delivery

F.A.Q: Inver Warrior Robotic Pool Cleaner M60

PDF DOWNLOADS & VIDEOS: 

DELIVERY: We aim to send Warrior M60 on a next working day service

RETURNS: All Warrior M60 Cordless Robotic Pool Cleaners can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Inver Warrior Robotic Pool Cleaner M80 with AI-Wireless Technology

Features:

• For all types of pools 
• Cleans Floor only / Floor + Wall + Waterline
• 3.21L filter basket
• Navigation -  i-Mapping + Freedrive AI
• Run time 8 hours
• Cleaning Time 0.5 / 1 / 2 hours
• AI Auto Scheduling Every 1/2/3 days
• Soft Rubber treads
• Optimized algorithms for Full Coverage, intelligent obstacle traversing

F.A.Q: Inver Warrior Robotic Pool Cleaner M80

PDF DOWNLOADS & VIDEOS: 

DELIVERY: We aim to send Warrior M80 on a next working day service

RETURNS: All Warrior M80 Cordless Robotic Pool Cleaners can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

InverPro 25 Inverter Variable Speed Swimming Pool Pump 1.1kw

If you are looking for the Quietest Pool Pump that uses the least amount of energy we have the InverPro IP25 Inverter Swimming Pool Pump 

InverSilence technology is self-developed by Aquagem for the most silent and energy saving pump solutions. It combines full inverter technology, volute hydraulic system and DC brushless motor and thus reduces the sound level more than 30 times and saves energy by up to 90%

Full Inverter technology

The inverter drive can precisely control the pump speed. It allows the running capacity to be automatically adjusted between 20~100%, which is the most energy saving and silent.

Volute hydraulic system

The noise is isolated by the volute structure which makes more turbulence-free flow at less noise compared with the traditional diffuser type.

DC brushless motor

DC brushless motor ensures the pump creates much less noise, higher efficiency and more durability.

How does it work?

• Auto Inverter mode: After setting the water flow, the pump can automatically detect the system pressure and adjust the running capacity to ensure constant flow.
• Manual Inverter mode: The running capacity can be set manually according to different application needs.
• Power consumption reading
• Flow reading
• External control-RS485 modbus
• Soft start protection

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

If you are looking for the Quietest Pool Pump that uses the least amount of energy we have the InverPro IP30 Inverter Swimming Pool Pump 1.4kw

InverSilence technology is self-developed by Aquagem for the most silent and energy saving pump solutions. It combines full inverter technology, volute hydraulic system and DC brushless motor and thus reduces the sound level more than 30 times and saves energy by up to 90%

Full Inverter technology

The inverter drive can precisely control the pump speed. It allows the running capacity to be automatically adjusted between 20~100%, which is the most energy saving and silent.

Volute hydraulic system

The noise is isolated by the volute structure which makes more turbulence-free flow at less noise compared with the traditional diffuser type.

DC brushless motor

DC brushless motor ensures the pump creates much less noise, higher efficiency and more durability.

How does it work?

• Auto Inverter mode: After setting the water flow, the pump can automatically detect the system pressure and adjust the running capacity to ensure constant flow.
• Manual Inverter mode: The running capacity can be set manually according to different application needs.
• Power consumption reading
• Flow reading
• External control-RS485 modbus
• Soft start protection

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

InverPro 40 Inverter Variable Speed Swimming Pool Pump 1.75kw

If you are looking for the Quietest Pool Pump that uses the least amount of energy we have the InverPro range available. The IP40 Inverter Swimming Pool Pump 1.75kw Pump so can provide significant flow and also run at much lower rate providing significant cost savings compared to traditional pumps

InverSilence technology is self-developed by Aquagem for the most silent and energy saving pump solutions. It combines full inverter technology, volute hydraulic system and DC brushless motor and thus reduces the sound level more than 30 times and saves energy by up to 90%

Full Inverter technology on Inverpro 40 1.75kw

The inverter drive on the Inverpro range can precisely control the pump speed. It allows the running capacity to be automatically adjusted between 20~100%, which is the most energy saving and silent.

Volute hydraulic system

The noise is isolated by the volute structure which makes more turbulence-free flow at less noise compared with the traditional diffuser type.

DC brushless motor

DC brushless motor ensures the pump creates much less noise, higher efficiency and more durability.

How does it work?

• Auto Inverter mode: After setting the water flow, the pump can automatically detect the system pressure and adjust the running capacity to ensure constant flow.
• Manual Inverter mode: The running capacity can be set manually according to different application needs.
• Power consumption reading
• Flow reading
• External control-RS485 modbus
• Soft start protection

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

If you are looking for the Quietest Pool Pump that uses the least amount of energy we have the InverPro IP32 Inverter Swimming Pool Pump 1.4kw

InverSilence technology is self-developed by Aquagem for the most silent and energy saving pump solutions. It combines full inverter technology, volute hydraulic system and DC brushless motor and thus reduces the sound level more than 30 times and saves energy by up to 90%

Full Inverter technology

The inverter drive can precisely control the pump speed. It allows the running capacity to be automatically adjusted between 20~100%, which is the most energy saving and silent.

Volute hydraulic system

The noise is isolated by the volute structure which makes more turbulence-free flow at less noise compared with the traditional diffuser type.

DC brushless motor

DC brushless motor ensures the pump creates much less noise, higher efficiency and more durability.

How does it work?

• Auto Inverter mode: After setting the water flow, the pump can automatically detect the system pressure and adjust the running capacity to ensure constant flow.
• Manual Inverter mode: The running capacity can be set manually according to different application needs.
• Power consumption reading
• Flow reading
• External control-RS485 modbus
• Soft start protection

DELIVERY: InverSmart 13kw Swimming Pool Heat Pumps are delivered by specialist hauliers and can take between 1-3 days for delivery

RETURNS: InverSmart 13kw Swimming Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

InverSmart 13kw Swimming Pool Heat Pumps are Full Inverter Heat Pumps, unlike some other Inverter heat pumps which are part Stepped Inverters offering only three settings.

InverSmart 13kw Swimming Pool Heat Pump uses Step less DC Full Inverter technology in the Mitsubishi Compressor. Brushless DC Fan Motor allows for energy savings when put up against other heat pump brands or types of pool heating.

Heating pools can be expensive with energy prices on the rise. Heat pumps can reduce heating bills by 70% with An InverSmart 13kw Step less Inverter Heat Pump

The 13kw InverSmart Swimming Pool Heat Pump can weather permitting provide a high C.O.P. of up to 13, which means that it only requires between 8% - 20% of the power output provided to power the compressor and fan. This converts in the main Summer months at an input of only 1kw whilst outputting an amazing 13kw.

InverSmart Swimming Pool Heat Pump uses the latest environmentally friendly R32 Refrigerant gas 

InverSmart Swimming Pool Heat Pump Features & Improvements

• High C.O.P. of 13
• Step less Full DC Inverter
• Whisper Quiet
• Wi-Fi App Controlled
• Mitsubishi Compressor
• Twisted Titanium Heat Exchanger
• Patented Air-Stream Design
• Anti Rust ABS & Aluminium Alloy Casing
• R32 Gas
• Electronic Expansion Valve
• Hot Gas Defrost

Low running costs are achieved with the InverSmart Heat Pump. The heat pump has three types of settings, "Standard", the same as an On 'Off heat pump, used when opening your pool and for the colder periods, "Smart" mode where the inverter will change between three available options to maintain pool temperature and "Silent" mode which is used during warmer Summer days and is the most economical mode. The InverSmart Swimming Pool Heat Pump will change between all of these settings seamlessly providing the maximum heat output at the lowest possible cost.

Please contact us on 01322554870 when deciding how To Choose The Right Size Heat Pump For Your Swimming Pool inground and if it is insulated. running our heat pumps on their pools, so we are extremely proficient in helping you choose the ideal heat pump for your swimming pool.

If you would like help or advice sizing your heat pump for your pool please call us on 01322 554 870

DELIVERY: InverSmart 16kw Swimming Pool Heat Pumps are delivered by specialist hauliers and can take between 1-3 days for delivery

RETURNS: InverSmart 16kw Swimming Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

InverSmart 16kw Swimming Pool Heat Pumps are Stepless Full Inverter Heat Pumps, unlike other Inverter heat pumps available in the UK, which are part Stepped Inverters offering only three settings.

The InverSmart 16kw Swimming Pool Heat Pump uses Stepless DC Full Inverter technology in the Mitsubishi Compressor as well as a Brushless DC Fan Motor that allows for incomparable energy savings when put up against other heat pump brands.

Heat Your Pool From Only 18p Per Hour With An InverSmart 16kw Stepless Inverter Heat Pump

The 16kw InverSmart Swimming Pool Heat Pump has an extremely high C.O.P. of up to 13, which means that it only requires between 8% - 20% of the power output provided to power the compressor and fan, meaning that in the main Summer months the InverSmart Heat Pump could be running at an input of only 1.2kw whilst outputting an amazing 16kw. This means running costs can be less than 18p per hour to heat a 30ft x 15ft swimming pool, which means the InverSmart Heat Pump is the cheapest way to heat a swimming pool.

Environmentally Friendly Swimming Pool Heating

The 16kw InverSmart Swimming Pool Heat Pump uses the more environmentally friendly R32 Refrigerant gas rather than the older R410A gas used by other heat pumps. Not only is this better for the environment, but also provides a higher energy output and heat production whilst using less gas. It costs more than the cheaper R410A gas, but the R32 gas allows the 16kw InverSmart Swimming Pool Heat Pump to achieve its amazing output.

InverSmart Swimming Pool Heat Pump Features & Improvements

• High C.O.P. of 13
• Stepless Full DC Inverter
• As Quiet As A Fridge
• As Litle As 15p Per Hour To Run
• Wi-Fi App Controlled
• Mitsubishi Compressor
• Twisted Titanium Heat Exchanger
• Patented Air-Stream Design
• Anti Rust ABS & Aluminium Alloy Casing
• R32 Gas
• Electronic Expansion Valve
• Hot Gas Defrost

Cheaper & Quieter Swimming Pool Heating With An Inversmart Heat Pump

One of the advantages that the Inversmart 16kw Swimming Pool Inverter Heat Pump has over its competition is the extremely low running costs and the ultra-quiet operation, as quiet as a fridge in the ultra-efficient mode. This is because it has a Full, Stepless Inverter. There are three types of Swimming Pool Heat Pump, an On/Off model, which as you would expect, can only be turned on and off with the compressor and fan only running at one fixed speed. These are the noisiest and also the most expensive heat pump to run. The next option available on swimming pool heat pumps is a "Stepped Inverter". This is where the inverter has Three available settings, "Standard", the same as an On'Off heat pump, used when opening your pool and for the colder periods, "Smart" mode where the inverter will change between three available options to maintain pool temperature and "Silent" mode which is used during warmer Summer days and is the most economical mode. These modes have to be chosen manually so the heat pump may not be functioning at its optimum level for the ambient air temperature.

The "Full Stepless Inverter" on the InverSmart Inverter Swimming Pool Heat Pump will change between all of these settings seamlessly always providing the maximum heat output at the lowest possible cost.

Highest Quality Components In A Heat Pump For Pools

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For DAB Commercial Pool Pumps, from 3HP upwards but below 5.5HP, is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For DAB Commercial Pool Pumps Up To (but not including) 5.5HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

We Have Inverter Variable Speed Drives Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Just search our website to find yours or call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 5.5HP (4.1kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £12,178 per year running costs

Cost of unit £972.00

Suggested Cost of installation £350.00

Total cost £1322.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £8914 Per Annum.

Cost saving is £272 per month and 5 months payback on purchase & installation.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For Hayward Commercial Pool Pumps, from 3HP upwards but below 5.5HP, is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For Hayward Commercial Pool Pumps Up To (but not including) 5.5HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

We Have Inverter Variable Speed Drives Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Just search our website to find yours or call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 5.5HP (4.1kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £12,178 per year running costs

Cost of unit £972.00

Suggested Cost of installation £350.00

Total cost £1322.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £8914 Per Annum.

Cost saving is £272 per month and 5 months payback on purchase & installation.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For Speck Commercial Pool Pumps, from 3HP upwards but below 5.5HP, is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For Speck Commercial Pool Pumps Up To (but not including) 5.5HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

We Have Inverter Variable Speed Drives Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Just search our website to find yours or call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 5.5HP (4.1kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £12,178 per year running costs

Cost of unit £972.00

Suggested Cost of installation £350.00

Total cost £1322.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £8914 Per Annum.

Cost saving is £272 per month and 5 months payback on purchase & installation.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For Starite Commercial Pool Pumps, from 3HP upwards but below 5.5HP, is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For Starite Commercial Pool Pumps Up To (but not including) 5.5HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

We Have Inverter Variable Speed Drives Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Just search our website to find yours or call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 5.5HP (4.1kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £12,178 per year running costs

Cost of unit £972.00

Suggested Cost of installation £350.00

Total cost £1322.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £8914 Per Annum.

Cost saving is £272 per month and 5 months payback on purchase & installation.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For Waterco Commercial Pool Pumps, from 3HP upwards but below 5.5HP, is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For Waterco Commercial Pool Pumps Up To (but not including) 5.5HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

We Have Inverter Variable Speed Drives Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Just search our website to find yours or call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 5.5HP (4.1kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £12,178 per year running costs

Cost of unit £972.00

Suggested Cost of installation £350.00

Total cost £1322.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £8914 Per Annum.

Cost saving is £272 per month and 5 months payback on purchase & installation.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.


When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For Commercial Pool Pumps below 5.5HP is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For Commercial Pool Pumps Up To 5.5HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

This Inverter Variable Speed Drive is Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 5.5HP (4.1kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £12,178 per year running costs

Cost of unit £972.00

Suggested Cost of installation £350.00

Total cost £1322.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £8914 Per Annum.

Cost saving is £272 per month and 5 months payback on purchase & installation costs.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Inverter Variable Speed Drive For 3 Phase Commercial Pool Pumps below 10HP is a solution designed to greatly reduce the running costs of commercial pool circulation pumps and improve the efficiency of swimming pool filtration.

Swimming pool pumps invariably run at higher flow rates than necessary, to allow for the power needed when backwashing. Inverter Variable Speed Drive For 3 Phase Commercial Pool Pumps Up To (but not including) 10HP Inverter technology enables you to control pump flow-rates during the filtration period, which is over 95% of the time.

Swimming pool pump energy conservation is evolving, it’s now possible to reduce the running costs of your commercial pool pump by as much as 33% simply by reducing your pump speed to 80% for 95% of the time and the running it at 100% power while backwashing for the remaining 5% of the time.

We Have Inverter Variable Speed Drives Suitable For The Following Pumps:

BP Range, BPH Range, Calpeda, Modern, Hurricane, Giant, Great Giant, Hydrostar, Columbia, Aral, Maxim, Shark, Speck, Hayward, Waterco, Starite and DAB

Just search our website to find yours or call us on 01322 554 870 for us to assist choosing the correct model.

How does it work?

Example of cost saving Pump size 10HP (7.46kW) 3 phase pump.

Operating time 24 hours / 7 days a week / 52 weeks- £22,158 per year running costs

Cost of unit £1764.00

Suggested Cost of installation £350.00

Total cost £2,114.00

Based on electricity at 34p per kWh

The cost of running the pump at 80% of the speed for 95% of time and 100% of speed for 5% (backwash) is £16,220 Per Annum.

Cost saving of £5938 Per Annum is £494 per month saving and just over 4 months for return on investment and payback on purchase & installation cost.

Understanding Pump Affinity Laws

Understanding pump affinity laws will allow you to explain, demonstrate and calculate how a change in motor speed impacts;

• flow rates against resistance

• power consumption

• operating costs

1. The change in flow is proportionate (equal) to the change in speed. If we halve the speed we halve the flow

2. The change in pressure is equal to the speed change factor squared. Operating pressure will be 1/4 of the original pressure

3. The change in power consumption is equal to the speed change factor cubed. Power consumption will be 1/8 the original consumption

As an example, if we take a pump with the following characteristics:

• Motor speed: 2850 rpm

• Flow rate: 302 lpm

• Pressure: 8 metres head

• Power input: 983 Watts

We set the low speed at 1900 rpm – a reduction factor of 0.67 - 1900 ÷ 2850 = 0.67 Applying the factor 0.67 to all pump affinity laws we can determine the pumps operating characteristics at the new speed on 1900 rpm.

1. The change in flow is proportionate (equal) to the change in speed. 302 x 0.67 = 202 lpm

2. The change in pressure is equal to the speed change factor squared. 8 x 0.67 x 0.67 = 3.6 metres head

3. The change in power consumption is equal to the speed change factor cubed. 983 x 0.67 x 0.67 x 0.67 = 295 watts

Therefore, the pump has these new low speed operating characteristics:

• Motor speed: 1900 rpm

• Flow rate: 202 lpm

• Pressure: 3.6 metres head

• Power input: 295 watts

If you would like help choosing the correct Inverter Variable Speed Drive For Your Pool, Please Call Us On 01322 554 870

In stock for fast delivery