DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Pacific Silvermist Steel Walled Swimming Pool with 48" Wall Height. Making It Ideal For A Young Family. Affordable & Fitted With Sand Filter & Pump

Pacific Silvermist Steel Wall Swimming Pools, with subtle curves and smooth lines, with a modern Grey finish, turn your garden into the perfect holiday home, every day of the year.

Pacific Silvermist Above Ground Pools have

• Steel Wall Protected With AntiCorrosion System 
• Galvanised Steel Fasteners
• Interlocking Stabiliser System - Top & Bottom
• Grey Wall
• Easy To Assemble
• Buttress-less Space Saver System On Oval Pacific Silvermist Pools

The Pacific Silvermist Steel Wall Pool range of pools comes in four sizes to suit all gardens

12ft Round Pacific Silvermist Steel Wall Swimming Pool

15ft Round Pacific Silvermist Steel Wall Swimming Pool

16ft x 10ft Oval Pacific Silvermist Steel Wall Swimming Pool

24ft x 12ft Oval Pacific Silvermist Steel Wall Swimming Pool

Add one of our heat pump upgrades to allow you and your family to use your pool all Summer long, not only this year, but for many years to come.

All Pacific Silvermist Above Ground Pool Packages Include:

• Plain Blue Overlap Liner
• Sand Filter & Pump with Sand Media
• Skimmer
• Rigid Pipe Plumb Kit
• Comfort Resin A-Frame Ladder
• Chemical Starter Kit

For advice on what heater will best suit your Pacific Silvermist Above Ground Swimming Pool and your family call us on 01322 554 870

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Patterned 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Patterned 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Patterned 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Patterned 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Pentair Azur Freeflo Pump Filter Combo is a quality package offering a pump and filter system that will provide circulation and clarity to your pool water. The Filter is a one piece blow-moulded non-corrosive tank providing strength and durability. The pump is a quality branded pump that is both efficient and quiet

Pentair have created a one piece unique blow-moulded Swimming Pool filter to partner the already reliable and great performing Pentair Swimming Pump to create a Pentair Swimming Pool Pump/Filter combination. Pentair have been in the industry over 40 years and continue to move with technology and create the best products for you the customer.

The Pentair Azur Filter comes in 3 different sizes 15'',19'' and 22'' which are then partnered by 0.5hp, 0.75hp and 1.00hp. Having the right optimum filter and pump size is key to maintaining the ideal flow rate and pressure for your Swimming Pool filtration system.

The Azur filter comes with a 6 point multiport valve which lets you use Filtration, Re-circulate, Waste, Backwash, Rinse and Closed options when needed. You will have your filter mainly on Filtration when running your Swimming Pool filtration.

If filter media is required we have provided a option to buy the right quantity for each filter combination listed

The pentair filter is a top mounted system that can use both sand or glass

15" 50kg sand / 45kg glass

19" 75kg sand / 65kg glass

22" 100kg sand / 85kg glass

DELIVERY: Pentair Bluestorm is sent out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: Pentair Bluestorm Pool Cleaners can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

PRODUCT INFO: Pentair Bluestorm Pool Cleaners are robotic pool cleaners that work on flat bottom swimming pools. The Pentair Bluestorm is great for small to medium sized swimming pools including above ground pools Like wooden or doughboy pools.

The Pentair Bluestorm has a great navigation system that will make sure the whole pool is cleaned and it will also detect objects in the pool such as steps and ladders or unusual designed pools.

This is a great value cleaner with technology normally seen on more expensive robotic pool cleaners

The Pentair Bluestorm vacuums and scrubs the pool floor. The cleaner comes with a 12m cable and the pool cleaner is extremely light weight - only 6kg

The Pentair Bluestorm has a night light built in for when you run the pool in the evening. the cleaner comes with a large capacity filter bag.

PRODUCT INFO:

Pentair Boost-Rite Evo Booster Pump For Polaris Pool Cleaners

The Pentair Boost-Rite Evo Booster Pump was built especially for the requirements of Polaris Swimming Pool Pressure Cleaners, but was discovred to be better for other pressure cleaners, too. Also, they work so effectively just as a booster pump for water features and solar collectors, too.

Available two Hp sizes. 1HP and 1.5HP to suit most UK swimming pools. 

This is a great retro-fit or replacement booster pump for your swimming pool pressure cleaner.

Quick Summary: Pentair Boost-Rite Evo Booster Pumps help pool owners replace their existing booster pumps for a cheaper model without having to lose any quality or effectiveness.

F.A.Q: Pentair Boost-Rite Evo Booster Pump For Polaris Pool Cleaners

PDF DOWNLOADS & VIDEOS: 

CLICK HERE FOR PENTAIR BOOST-RITE EVO BOOSTER PUMP LEAFLET

DELIVERY: We aim to send Boost-Rite Evo Booster Pumps within 1 day. Stock items are normally sent same day, and delivery made between 2-3 days

RETURNS: 

Boost-Rite Evo Booster Pumps can be returned in original packaging, suitable for resale, within 14 days from date of delivery. When we receive the (product), our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

DELIVERY: Pentair Freeflo Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Pentair Freeflo Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

The Pentair Freeflo is a drop in replacement for the Sta-Rite Swimmey Pump that is now no longer available. The Pentair Freeflo is a great quality pump that comes in 5 sizes, so is suitable for most domestic swimming pools from small above ground to larger inground pools that require upto 18 cubic meters p/h flow rate.

The Pentair Freeflo has a thick walled body, transparent lid and has highly engineered hydraulics that make this rugged and tested design perfect for any pool. The new Pentair FreeFlo / Swimmey swimming pool pump is quiet running.

FreeFlo is a drop-in replacement for the Pentair Swimmey Swimming Pool Pump series. The Freeflo is self-priming and offers great value for money and normally held in stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The FreeFlo .33hp is the ideal pump for above-ground and small in-ground pools. The pump has thick walled body parts, a heavy-duty motor, and highly engineered hydraulics make this rugged and tested design perfect for any pool. The new FreeFlo is a mono-block design allowing it to run more silent and requiring less footprint space.

FreeFlo is a drop-in replacement for the Swimmy Pump series. Self-priming pump with prefilter for swimming pools, mono Block design for silent operation. The pump has a single Piece, see-through Cam and Ramp™ lid for inspection of strainer basket and easy cleaning and maintenance access. The large long life HDPE basket to hold debris, easy to clean. The pump has a heavy duty, thermally protected TEFC (TEFC : Totally Enclosed Fan Covered) motor IP5550mm ID (ID is Inner Diameter). Swivel unions are included for better sealing and more flexibility at installations

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The FreeFlo .50hp is the ideal pump for above-ground and small in-ground pools. The pump has thick walled body parts, a heavy-duty motor, and highly engineered hydraulics make this rugged and tested design perfect for any pool. The new FreeFlo is a mono-block design allowing it to run more silent and requiring less footprint space.

FreeFlo is a drop-in replacement for the Swimmy Pump series. Self-priming pump with prefilter for swimming pools, mono Block design for silent operation. The pump has a single Piece, see-through Cam and Ramp™ lid for inspection of strainer basket and easy cleaning and maintenance access. The large long life HDPE basket to hold debris, easy to clean. The pump has a heavy duty, thermally protected TEFC (TEFC : Totally Enclosed Fan Covered) motor IP5550mm ID (ID is Inner Diameter). Swivel unions are included for better sealing and more flexibility at installations

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The FreeFlo .75hp is the ideal pump for above-ground and small in-ground pools. The pump has thick walled body parts, a heavy-duty motor, and highly engineered hydraulics make this rugged and tested design perfect for any pool. The new FreeFlo is a mono-block design allowing it to run more silent and requiring less footprint space.

FreeFlo is a drop-in replacement for the Swimmy Pump series. Self-priming pump with prefilter for swimming pools, mono Block design for silent operation. The pump has a single Piece, see-through Cam and Ramp™ lid for inspection of strainer basket and easy cleaning and maintenance access. The large long life HDPE basket to hold debris, easy to clean. The pump has a heavy duty, thermally protected TEFC (TEFC : Totally Enclosed Fan Covered) motor IP5550mm ID (ID is Inner Diameter). Swivel unions are included for better sealing and more flexibility at installations

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The FreeFlo 1.5hp is the ideal pump for above-ground and small in-ground pools. The pump has thick walled body parts, a heavy-duty motor, and highly engineered hydraulics make this rugged and tested design perfect for any pool. The new FreeFlo is a mono-block design allowing it to run more silent and requiring less footprint space.

FreeFlo is a drop-in replacement for the Swimmy Pump series. Self-priming pump with prefilter for swimming pools, mono Block design for silent operation. The pump has a single Piece, see-through Cam and Ramp™ lid for inspection of strainer basket and easy cleaning and maintenance access. The large long life HDPE basket to hold debris, easy to clean. The pump has a heavy duty, thermally protected TEFC (TEFC : Totally Enclosed Fan Covered) motor IP5550mm ID (ID is Inner Diameter). Swivel unions are included for better sealing and more flexibility at installations

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The FreeFlo 1hp is the ideal pump for above-ground and small in-ground pools. The pump has thick walled body parts, a heavy-duty motor, and highly engineered hydraulics make this rugged and tested design perfect for any pool. The new FreeFlo is a mono-block design allowing it to run more silent and requiring less footprint space.

FreeFlo is a drop-in replacement for the Swimmy Pump series. Self-priming pump with prefilter for swimming pools, mono Block design for silent operation. The pump has a single Piece, see-through Cam and Ramp™ lid for inspection of strainer basket and easy cleaning and maintenance access. The large long life HDPE basket to hold debris, easy to clean. The pump has a heavy duty, thermally protected TEFC (TEFC : Totally Enclosed Fan Covered) motor IP5550mm ID (ID is Inner Diameter). Swivel unions are included for better sealing and more flexibility at installations

DELIVERY: Pentair Intelliflo Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Pentair Intelliflo Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Pentair Intelliflo VSD built with Sta-Rite 5P6R wet end, reduces your running costs offering payback in first two years. Dramatic reduction in noise and the fact that the Pentair Intelliflo reduces your running cost so much, paying for itself in less than 3 years on a standard extended summer pool to less than 2 years if used on a small commercial, public pool or frequently used domestic in-door pool. Pentair Intelliflo has an extremely low operation noise and high indirect impact in the reduction of CO2 emissions.

Pentair have added built-in features to protect the Intelliflo from prime flow impedance, over heating, freezing and under or over voltage. Pentair Intelliflo is an Eco Efficent pump that will slash you electricity bills by 30 - 90%. Manufactured to be multi-purpose it can be used on several applications, the first being pool filtration, another being used to boost power for cleaning as well as creating water features or waterfalls in the pool and also reducing the maintenance cost of your swimming pool.

Pentair Intelliflo is the new standard of Swimming Pool Pumps. Pentair Intelliflo monitors and controls and adjusts to a range of demands and different pool conditions. The Intelliflo is a variable speed pump which Watts/Amps varie according to the pressure and flow of your swimming pool. Pentair have made built-in protections to the Interlliflo being loss of prime flow impedance, thermal overload, freezing protection and under and over voltage. Pentair Intelliflo is a Eco Efficent product that will reduce energy consumption by 30 - 90%. Intelliflo is manifactured to be versatile, on its own Pentair Intelliflo can be used for several applications (filtration, cleaning, waterfalls, etc.) reducing the maintenance cost of your swimming pool. The noise level on the Pentair Intelliflo is unnoticed when operating, it is quiet as human whisper. 

Pentair Intelliflo Advantages Add More Value For Money!

• Thanks to its permanent magnet motor and the fact that it is totally enclosed fan cooled (TEFC) design, which means there are no touching parts rubbing against each other. This means the pentair pump is the quietest pump on the planetever made. At typical speeds you can hardly hear it's operating
• IntelliFlo permanent magnet motor produces far less heat and vibration that the standard self priming induction motor pumps. This not only results in less strain & wear on the components of the pump, but also on other equipment. Furthermore on investigating the main faults we regular hear with the induction pump it would be overheating, freezing and voltage irregularities. The intelliflo pumps has a motor that protects itself from damage by adjusting it's voltage variations as well as reducing its speed to prevent motor over heating. The result is you can expect a dramatically longer life and even greatre return on your investment.   
• The Intelliflo can also adjust to new features and equipment without changing the pump. You can add a solar system or water feature or even change your filter by simply pushing a button to set the optimum speed to operate at the lowest energy use. Your savings are maintained even as your swimming pool system changes
• The Intelliflo has the ability to manage water features by altering the performance of the pump. Want to add height to deck jets or fountains? want to increase the water flow to waterfalls or avanishing edge you simply increase or decrease pump speed with a touch of a button to adjust the demand. You manage the sights and sounds of your back garden retreat while driving energy cost down to new lows

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Tagelus Top Mount Sand Filter - Complete  with sand and pea gravel

The Tagelus Top mount Sand filter is a unique fibreglass reinforced tank with superior strength and durability. Tagelus Top Mount Sand Filter are also equipped with a multiport valve with six positions and a clamp to give it durability.

The Tagelus is a high rate sand filter which is designed to operate for years with minimum amount of maintenance work to do. If installed correctly to the instruction supplied, it will provide years of trouble free operation. Dirt is collected in the filter as the water flows through the control valve at the top of the filter and is directed downwards onto the top surface of the filter media bed. The dirt is collected in the media bed and the clean water flows through the lower piping at the bottom of the filter up through the centre pipe into the control valve at the top of the filter.

• Special Lateral design provides superior flow characteristics and long filter cycles for economical operation
• Maximum Operating Pressure 50 psi
• Combination water and media drain makes servicing and winterising fast and easy

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

The Sta Rite WhisperPro is the quietest pump available on the swimming pool market. Great for both above ground and in ground Swimming Pools. Reliable and great performing pump ranging from 0.75hp to 3hp

The whisperpro is a direct replacement for the whisperflo. This is a self priming sta-rite pump that has been made for quiet operation.

Sta-Rite WhisperPro is the making of a proprietary hydraulic design which has been refined for over 40years. The Whisperflo is engineered to move the water more efficiently and quietly then other competitive Swimming Pool Pumps. Thanks to the unique design of the FunnelFlo diffuser and a high efficiency impeller that maximizes water flow and energy efficiency. This ensures the quietest of operations. The pre filter comes with an oversized strainer basket which reduces cleaning frequency. The pre filter lid is clear which allows instant inspection. The Whisperflo also delivers the power needed for suction side, pressure side and in floor cleaning systems.

The WhisperPro also comes in Three Phase for this design, please call for this option 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Plain & Threaded Hose Tail For Swimming Pools

Plain or Threaded Hosetails are used for connecting flexible pipe onto a rigid fitting. We provide heavy duty ABS, Plain and Threaded horsetails in 1.5". Available for next working day delivery.

DELIVERY: Swimming Pool Liners are made to order so lead times for pool liners are approx 2 to 3 weeks

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Swimming Pool 30 thou Plain Liners, available in a range of colours. We can also offer an installation service. UK made liners of the highest quality. Foam, felt and other liner installation products available. Please contact us if you have any questions or would like to discuss the liners in more detail    

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain Blue 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain Blue 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Replacement Plain Blue Overlap Liners by Swimline are 16 thou on the floor & walls, to ensure a professional installation only install the liner on a warm and dry day as these are stretched into place to prevent creases. These liners are suitable for 48” and 52” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

The Overlap liner is probably the least expensive liner you can buy on the market but if installed correctly can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. Here are a few liner installation guidelines that we would strongly suggest following 

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. Always form a cove or install your Easy Cove at the bottom of the pool wall. The coving is a vital part in ensuring a lock is formed at the bottom of your pool. An inadequate cove will result in liner pushing underneath the wall causing the liner to fail.

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

When overlapping your liner be careful not to drag it over any sharp edges to puncture the liner and make sure the overlap is even all the way round. Once you have overlapped it so much aim to have the liner 3” to 6” off the ground before filling and clamp down with heavy duty pegs. 

Start filling the pool, at this stage there should be 1 person inside the pool trying to move out any excess liner material to the edges and ensuring they control the helpers outside the pool to release or hold the liner as necessary.

Whilst filling do not be tempted to drop to much liner in at once as creases will not be able to be pulled out due to the weight of the water. Drop liner in small and even quantities until water level has reached pools walls, at this stage you should not have to drop any more liner in.

These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
Doughboy, Vouge, Teakwood Discovery, Equinox , Regatta & Regatta II, Topaz, Reprieve, Oracle, Trevi 205, Summer Days.

These liners have a material thickness of:
Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain with Tileband 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain with Tileband 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

DELIVERY: Plastica AG Mini Above Ground Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.

RETURNS: Plastica AG Mini Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Plastica AG Mini Heat Pump For Above Ground Pools is the newest Plug & Play heat pump for above ground pools in the UK. The AG Mini Heat Pump is especially suited to heat small to medium above ground pools up to 18m3. This makes it ideal for a 12ft x 48" Intex or Bestway Pool or a 15ft x 36" Intex or Bestway Pool

If you are looking for a larger Plug & Play Heat Pump for your above ground pool, we can offer two other choices the Poolstyle Mini Plug & Play Heat Pump For Intex Pools or the Flotide A10 9.6kw Plug & Play Above Ground Pool Heat Pump. Complete with UK 3 Pin Plug and an RCD pack, too.

You will need a conversion kit to connect to Intex or Bestway 1.5" Flexible Pool Hose

These can be ordered at the same time as the AG Mini Heat Pump

The Plastica AG Mini Heat Pump has an inline RCD Breaker connected to a UK 3-Pin plug. and weighing only 23kg allows it to be positioned anywhere in the garden.

With a start up rate of less than 1kw and a running current of only 590w the AG Mini Heat Pump will only cost around 8p per hour to run. Less than £1 per day. When compared to a normal electric heater that costs around £5 per day, you could save enough money in the first year to pay back the initial outlay.

Minimum Flow rate required on AG Mini Heat Pump For Above Ground Pools is 1.3m3/hr

No ByPass Required

A Good Quality Solar Cover Must be Used With This Heat Pump to help during the day and to preserve as much heat as possible at night. 

The AG Mini Above Ground Pool Heat Pump is suitable for pools up to 18m3

Below are suggestions for above ground Intex or Bestway pool sizes that the Plastica AG Mini Above Ground Pool Heat Pump is suitable for

Metal Frame Pools

Easy Set Pools

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

PRODUCT INFO: ITT Argonaut Pumps are UK made. The Argonaut Pumo is a  top quality swimming pool pumps which is perfect for domestic swimming pool of all sizes. The Argonaut pump is are available in single and 3 phase and comes in 1 1/2" 50mm and 63mm 2" fittings.

The Itt Argonaut pump has some great features, large 1.75 ltr basket, very quiet running, just 60db motor and high grade stainless steel motor shaft.

The ITT Argonaut Pump is ideal for salt water systems and can take high salt water concentration

Single and 3 phase pumps are In Stock for fast delivery. Please contact us on 01322554870 for more information and for details on the 3 phase price