DELIVERY: In-stock items are sent out on a next working day service
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.
When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..
PRODUCT INFO:
The Black 400 Micron Heat Retention Bubble Cover will not only reduce your running costs it will also stop algae growth, cutting your chemical costs dramatically.
made to order, so please allow 5 days for delivery
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect
PRODUCT INFO:
Combination 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Combination 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.
We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.
Liner Installation Instructions
Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.
Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day
Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through.
Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.
Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions.
Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.
Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.
Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.
DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.
Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.
.
When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..
PRODUCT INFO:
GeoBubble Energy Guard Solar Cover is a combined Summer and Winter Swimming Pool Cover that stops Algae growth and gives you maximum heat retention. The Energy Guard cover absorbs the sun's energy and warms your pool water effectively. Because the Black / Grey cover eliminates algae growth and water evaporation you could see savings of up to 60% on chemical consumption. The GeoBubble Energy Guard cover can also be used as a Winter Cover reducing debris contamination and retaining heat on pools or even ponds that are used all year round
The GeoBubble Energy Guard 500 micron Winter & Summer Pool Cover is Black / Grey cover that inhibits algae use saving you money, time, water and energy usage, it warms your swimming pool water, has spectacular heat retention capabilities and will reduce your chemical use massively and these benefits should make it your first choice when you are looking for a swimming pool cover that will be suitable for both Winter and Summer use.
The GeoBubble Energy Guard 500 Winter & Summer Swimming Pool Cover product has a dark top surface and a black underside. It is this combination that gives it the ability to provide a variety of benefits to the pool owner whilst being formulated for climate conditions in various countries making it an ideal cover to install on a holiday home swimming pool over winter to ensure that you do not have an algae problem in the Spring. The GeoBubble Energy Guard 500-micron summer and winter cover is suitable for use swimming pools in Spain, France, Portugal, Cyprus and many other countries as an All Year-Round cover that will stop algae growth completely.
The GeoBubble Energy Guard 500 Swimming Pool Cover Will Stop Algae Growth All Winter Long
Save money by using up to 60% less pool chemicals
In the Gallery section, there are images of two pools that were both tested for ten days with no chemical treatment, no filtration and with simulated use. The pool shown in the 1st photo had a standard Solar cover fitted and went green very quickly due to algae growth. The 2nd photo shows a pool with the GeoBubble Energy Guard cover with no algae growth. This simple test was continued for two months and the pool remained clear of algae when the test period ended.
A more comprehensive test was done between October 2008 to April 2009 and a pool was covered with an EnergyGuard 500-micron cover and a woven mesh debris cover with NO WINTER POOL CHEMICALS used. The water was completely clear of algae after the 6-month period. You will save hours of pool preparation time by not having to filter, backwash and vacuum the pool, as well as saving money on chemicals and electricity usage.
Filtration time can be reduced by up to 50% when algae growth is inhibited by using the GeoBubble Energy Guard 500-micron pool cover. This will greatly reduce your electricity usage but filtration will still be required to remove any dirt or impurities from the pool and to circulate the water to allow for chemicals to reach all areas of the swimming pool.
The GeoBubble Energy Guard 500micron Winter & Summer Swimming Pool Covers Reduce Chemical Consumption by up to 60%, Water Evaporation by 98% and Energy Consumption By 50%
You can reduce chemical usage dramatically because of inhibited algae growth, almost eliminating water evaporation and most amazingly, because 90% of chlorine consumed in an outdoor swimming pool is used because the sun destroys it, the Black cover which cuts out sunlight into the swimming pool means that chlorine usage will be so much less in future.
If You Only Want To Buy One Cover This Year That Will Last You Many Years And Can Be Used All Year Round Then The GeoBubble Energy Guard Winter & Summer Cover Is Your Only Choice.
6 year pro rata warranty.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect
PRODUCT INFO:
Patterned 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Patterned 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.
We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.
Liner Installation Instructions
Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.
Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day
Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through.
Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.
Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions.
Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.
Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.
Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.
DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.
Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect
PRODUCT INFO:
Patterned 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Patterned 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.
We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.
Liner Installation Instructions
Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.
Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day
Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through.
Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.
Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions.
Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.
Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.
Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.
DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.
Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect
PRODUCT INFO:
Plain Blue 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain Blue 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.
We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.
Liner Installation Instructions
Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.
Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day
Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through.
Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.
Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions.
Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.
Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.
Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.
DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.
Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect
PRODUCT INFO:
Plain Blue 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain Blue 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.
We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.
Liner Installation Instructions
Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.
Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day
Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through.
Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.
Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions.
Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.
Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.
Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.
DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.
Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect
PRODUCT INFO:
Plain with Tileband 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain with Tileband 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.
We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.
Liner Installation Instructions
Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.
Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day
Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through.
Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.
Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions.
Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.
Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.
Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.
DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.
Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect
PRODUCT INFO:
Plain with Tileband 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain with Tile band 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.
We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.
Liner Installation Instructions
Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.
Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day
Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through.
Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.
Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions.
Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.
Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.
Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.
DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.
Prices below are are for Plain with Tileband 30 thou Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica Criss Cross Winter Swimming Pool Debris Cover for inground swiiming pools with a Criss Cross finish offering improved strength and durability over the Deluxe Winter Debris Covers. Very tough webbing which is stitched down the full length of a cover and across its width, spaced at approximately 5' to 6' intervals. Ideal For Windy Positions Or Where A More Durable Winter Debris Cover Is Needed.
The Plastica Criss Cross Winter Debris Cover is ideal for swimming pool owners with an outdoor pool. When the summer is over it is time to close down your pool until spring, if you don't fit a pool cover at this time then your pool is likely to fill with garden debris, leaves, and other damaging objects which may well clog up the filtration system and stain the lining of the pool. Our Criss Cross Winter Debris covers are made by in the UK by Plastica and will help protect your Swimming Pool from the elements.
Call 01322 554 870 and order over the phone for FREE Delivery
Made from Woven Polyethylene and UV stabalised these covers have the added strength as the webbing is stitched down the length of the cover and across the width providing you with a very tough winter debris cover for your swimming pool.
Please contact us if you require a quote on a size that is not listed below.
If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.
Please contact us if you require a quote on a size that is not listed below.
Plastica Deluxe Criss Cross Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
A Plastica Deluxe Criss Cross Winter Debris Cover with additional Roman End attachment. The Criss Cross finish offers improved strength and durability over the Deluxe Winter Debris Covers. Very tough webbing which is stitched down the full length of a cover and across its width, spaced at approximately 5' to 6' intervals
The Plastica Criss Cross Winter Debris Pool Cover with Roman End addition is ideal for swimming pool owners with an outdoor pool. When the summer is over it is time to close down your pool until spring, installing a Criss Cross Winter Debris pool cover at this time means your pool will not fill with garden debris, leaves, and other damaging objects which may well clog up the filtration system and stain the lining of the pool. Our Criss Cross Winter Debris covers are made by in the UK by Plastica and will help protect your Swimming Pool from the elements.
Call 01322 554 870 and order over the phone for FREE Delivery
Made from Woven Polyethylene and UV stabalised these covers have the added strength as the webbing is stitched down the length of the cover and across the width providing you with a very tough winter debris cover for your swimming pool.
Please contact us if you require a quote on a size that is not listed below.
If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.
Please contact us if you require a quote on a size that is not listed below.
Deluxe Criss Cross Winter Debris Covers including a 5ft Radius Roman End section come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica Deluxe Winter Debris Cover for Swimming Pools with a 5ft Roman End. These debris covers are manufactured 1ft larger than the pool perimeter so a 12 x 24ft Swimming Pool will mean the cover is 14ft x 31ft, including the length of the Roman End. The Cover is then cut to shape in the factory to fit around the Roman End.
These Winter Debris Covers For Swimming Pools with 5ft Roman Ends will protect your Swimming Pool during the winter months. The debris cover will reduce any frost damage to your swimming pool and minimise discolouration caused by leaves and other debris that would otherwise enter your swimming pool.
Call 01322 554 870 and order over the phone for FREE delivery
Our Swimming Pool Winter Debris Covers are made in the UK by Plastica. The material is a Woven Polyethylene which is UV stabalised and comes in a green/black finish.
For other sizes please contact us for a free quote.
Our high quality winter debris covers are manufactured in the UK from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica deluxe 10ft x 20ft (pool Size) winter debris cover. Our Plastica Winter Debris Covers come with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.
World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.
Call 01322 554 870 and order over the phone for FREE Delivery
Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.
Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.
Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
12 x 24 Pool Size Winter Debris Covers with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.
World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.
Call 01322 554 870 and order over the phone for FREE Delivery
Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.
Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.
Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Deluxe winter cover to fit a pool size 14 x 28. The Plastica Deluxe Winter Debris Covers come with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.
World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.
Call 01322 554 870 and order over the phone for FREE Delivery
Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.
Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.
Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Deluxe 15 x 30 Pool Size Winter Debris Cover from Plastica. The Winter Covers come with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.
World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.
Call 01322 554 870 and order over the phone for FREE Delivery
Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.
Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.
Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Deluxe Winter 16ft x 32ft (Pool Size) Debris Covers. Our Plastica winter debris covers come with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.
World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.
Call 01322 554 870 and order over the phone for FREE Delivery
Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.
Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.
Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica 20ft x 40ft (Pool Size) Deluxe Winter Debris Cover. Our Plastica Winter Debris Covers with up to 75% Discount. Buy a UK manufactured Winter Debris Cover for less than you would a "Cheap Import". The Deluxe Winter Debris Covers Come Complete With All Fixings.
World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.
Call 01322 554 870 and order over the phone for FREE Delivery
Winter Debris Covers for inground pools are supplied with P-Anchors with a Spring Mechanism. Ideally suited when space is not an issue the P-Anchor Sprung Mechanism ensures that the Deluxe Winter Debris Cover is securely kept in place all Winter.
Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
If You Are Looking To Just Replace Your Winter Debris Cover And Already Have All The Fixings Please CLICK HERE To Be Taken To The Replacement Winter Debris Cover Page.
Plastica Deluxe Winter Debris Covers come complete with P-Anchors & Springs to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica Flush Fix Winter Debris Covers are supplied with a floor fitting that sits much lower than the level of the sprung anchor holding the Winter Debris Cover. Requiring a little bit more time on installation the Flush Fix Winter Debris Covers are quite often installed on Decking as the fixings have a Brass Flush Fix Anchor Point, which is less prone to splitting wood.
The swimming pool winter debris covers supplied by World Of Pools are all UK manufactured . This is for three main reasons.
Call 01322 554 870 and order over the phone for FREE delivery
Flush Fix Winter Debris Covers for inground pools are supplied with Brass Flush Fix Anchors. Ideally suited when space is at a premium or on wooden decking the Brass Flush Fix Anchor & Sprung Mechanism ensures that the Flush Fix Winter Debris Cover is securely kept in place all Winter.
Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
Our Flush Fix Winter Debris Covers are made in the UK from a UV Stabilised Woven Polyethelene with a Green/Black finish. Our Debris Cover sizes relate to pool sizes but they wiil be produced 2 foot larger on the pool length and width, so when ordering just order your swimming pool size.
The Flush Fix Winter Debris Cover will also help reduce frost damage to the swimming pool and will dramatically reduce any staining from leaves and other winter debris would normally enter into the pool not only saving you money in repairs and stain removal in the Spring but will potentially prolong the life of your liner.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica Premium Winter Debris Covers for Inground Swimming Pools with up to 75% Discount. Buy a UK manufactured Premium Winter Debris Cover for less than you would a "Cheap Import". These Premium Winter Debris Covers Come Complete With All P-Anchor & Strap Fixings. Ideal If Space Is Limited.
World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.
Call 01322 554 870 and order online for FREE Delivery
Plastica Premium Winter Debris Covers for inground pools are supplied with P-Anchors with a Strap. Ideally suited when space is limited the P-Anchor & Strap ensures that the Premium Winter Debris Cover is securely kept in place all Winter without taking up a lot of room around the pool edge.
Premium Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
Premium Winter Debris Covers come complete with P-Anchors to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
Plastica Premium Winter Debris Covers for 28ft x 14ft Inground Swimming Pools with up to 75% Discount. Buy a UK manufactured Premium Winter Debris Cover for less than you would a "Cheap Import". These Premium Winter Debris Covers Come Complete With All P-Anchor & Strap Fixings. Ideal If Space Is Limited.
World Of Pools only supplies UK manufactured swimming pool debris covers. This is for three main reasons.
Call 01322 554 870 For Assistance Choosing The Correct Cover For Your Pool
Plastica Premium Winter Debris Covers for 28ft x 14ft inground pools are supplied with P-Anchors with a Strap. Ideally suited when space is limited the P-Anchor & Strap ensures that the Premium Winter Debris Cover is securely kept in place all Winter without taking up a lot of room around the pool edge.
Premium Winter Debris Covers are essential in keeping your swimming pool clear of all the detritus and rubbish that falls into your garden during the Autumn & Winter, but just because you need one does not mean you should pay more than you is neccesary and with our discounted price you won't have to.
Our high quality winter debris covers are manufactured from woven polyethylene and are designed to reduce the risk of frost damage in your pool, minimise the discolouration caused by leaves & other debris that falls into your pool and help stop Algae build up during the Winter months or periods when you are away from home .
All Winter Debris Covers are manufactured 1ft bigger on each side. The size shown is the swimming pool size.
Premium Winter Debris Covers come complete with P-Anchors to secure them into the paving around your swimming pool using a 6mm Drill Bit.
DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.
PRODUCT INFO:
The Plastica Replacement Winter Debris Covers are manufactured by Plastica from the same woven polyethylene as their standard Covers.
Plastica Replacement Winter Debris Cover For Deluxe, Flush-Fix Or Premium Inground Winter Debris Covers. These Swimming Pool Winter Debris Covers Come With STRAPS ONLY And Are Perfect If You Need To Replace Your Existing Winter Debris Cover But Have All The Fixings Already.
The Plastica Replacement Winter Debris Cover is made from the same material as the Deluxe, Premium & Flush-Fix Winter Debris Cover. The only difference is that they come with STRAPS ONLY and have NO FIXINGS.
Call 01322 554 870 and order over the phone for FREE Delivery
If your Winter Debris Cover has been damaged but you still have the fixings this option will save you up to 25% on our already discounted prices.
The Sizes for the Plastica Replacement Winter Debris Covers shown are pool sizes and the covers will be 1ft larger on all sides.
If your pool size is not shown please call 01322 554 870 for a quote.
Once you place your order you will be contacted to find out what spacing your current straps are so that the Replacement Winter Debris Cover can match exactly.
Strap spacing is normally between 1m - 1.5m on the width and 1.2m - 1.5m along the length. If you need straps spaced closer there will be a surcharge. Please call 01322 554 870 for a quote.
DELIVERY: Sol Guard 500 Covers are delivered on a 2 to 3 day delivery on standard size solar covers. Bespoke made to measure solar covers will take 5 to 7 working days
RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.
.
When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.
PRODUCT INFO: 
Sol Guard 500 solar covers have a bubble shaped almost like a figure 8, the new design offers a multitude of benefits for the pool owner.
Heat gain is a design feature of the Sol Guard Cover that adds up to 8°C FREE heat in your swimming pool. Two ply layered finish and the addition of UV Boosters allows extra solar gain that helps increase pool temperature more than any other cover.
Sol Guard Covers can eliminate water evaporation by 98% +, this greatly reduces your water bills and cuts heat loss dramatically, reducing chemical consumption by upto 30%
These solar covers significantly reduce your energy costs as they have been designed to practically eradicate evaporation and add heat. Plastipack's heat retention tests, carried out in collaboration with Brighton and London Metropolitan Universities, showed conclusive energy savings of over 50%.
The warranty on the Sol+Guard solar cover is a 6 year pro rata warranty and are supplied in two UV formulations that are covered by our pro rata 5 year warranty.
Stock is held for standard pool sizes such as 10x20, 12x24, 15x30 and 16x32 and we aim to send these out on a next day service. If you need a non standard size, please call or email for a quote.
Phone: 01322 554 870
Registered Office:
World of Pools,
Office 22 Innovation House, Innovation Way, Discovery Park, Sandwich, Kent, CT13 9FF
h2ofun-worldofpools@hotmail.com
Sign up to our email newsletter for exclusive discounts!
