Filters

Brand

Chemical

Colour

Media

NetType

Option

Pool

PoolType

Power

Price

Season

Size

size

Style

Syle

TESTING. Style

Type

Weight

Weight

weight

200 Micron Solar Covers - World of Pools

200 Micron Solar Covers

by Plastica
£99.00
  • Heavier than Bestway & Intex Solar Covers
  • Heats your pool for free
  • Keeps debris out of the pool
  • Retains heat at night
  • Reduces chemical usage

DELIVERY: 200 micron solar covers are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: 200 micron solar covers can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

200 Micron Above Ground Pool Solar Covers are over twice as thick as Intex or Bestway Solar Covers. Higher quality and better heat retention mean that these 200micron solar Covers will heat your pool quicker and keep the heat in longer. Ideal Solar Covers for Above Ground Pools.

All of our 200mic Above Ground Pool Solar Covers are made from Heavy Duty Blue Polyethylene that is UV stabilised to ensure a long life for your above ground pool solar cover.

Every swimming pool should have some kind of floating insulating cover, whether a bubble solar cover or solar sun rings to help add and retain heat in the pool water. If you have an above ground pool finding a high-quality bubble solar cover can be very expensive but World Of Pools can offer a top quality 200 micron solar cover at similar prices to the much lower quality Intex Solar Covers.

Better quality solar covers will also reduce water loss and less water evaporation means lower water bills and a reduction in chemical consumption

When using a 200 micron solar cover you should have the cover on the pool so the bubbles are facing down. To maximise performance always keep the cover on the pool when not in use.

blue 400 micron solar cover geobubble

Blue 400 micron Geobubble Solar Cover

by World Of Pools.com
£165.00
  • 400 micron geobubble Solar Cover Made In The UK
  • Adds heat to your pool for free
  • Reduce your heating bill and Save on chemicals
  • 3 Year Pro-Rata Warranty (UK & Eire)

 

DELIVERY: Next day delivery on standard size covers.

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

PRODUCT INFO:

Geobubble 400 Micron Solar Cover at a low price. Our World Of Pools swimming pool covers can help raise water temperature by up to 17%, turning your swimming pool into a huge solar collector. The "New & Improved" 400 Micron pool Covers will transfer maximum energy and help generate increased temperature through the day and will also prevent heat loss by up to 85%, as the outside temperature falls overnight.

400 micron solar cover is essential for a Swimming Pool whether Inground or Above. You need a pool cover to help reduce heat, chemical and water loss. With higher energy costs it is important to retain as much heat as possible and add heat. Our 400 micron solar cover is UK made and is an ideal cover for all swimming pools but at a price that is unbeatable.

We can make the cover to size to fit your pool including adding a leading edge, roman end and hemming, made to order covers take approx 10 days to make, please call or email for details


A swimming pool solar cover can:

  • Help Raise Water Temperature By Up To 17%
  • Reduce Heating Costs By Keeping Generated Heat In The Swimming Pool 
  • Solar covers will help to keep debris out of your pool making it cleaner
  • Enable you to make more use of your pool as warmer water will be used more
  • Reduce the amount of water you Lose through Evaporation, especially important is water restriction are in place
  • Save On Chemicals Through Reduced Evaporation Levels 

Solar Covers are essential when using an "On Demand" form of heating such as Solar, Heat Pump, Gas, Oil or Electric. Without a Swimming Pool Solar Cover you will be wasting vast amounts of money as the heat produced by your Swimming Pool Heater is lost into the atmosphere.

We have provided prices for the most common sizes of solar covers, but we can manufacture Solar Covers to any size you require. If your pool size is not listed below, please contact us for a price

 

Doughboy Liner Plain Blue 20 thou - World of Pools

Doughboy Liner Plain Blue 20 thou

by Doughboy
£335.00
  • Doughboy Plain Blue Liner
  • Replacement Liner For Doughboy Pools 
  • 20 Thou Thickness
  • Replacement Genuine Overlap Liner from Doughboy

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Replacement Doughboy Liners for both the Regent and Premier. High quality liners with unbeatable warranty on the seam. In stock for quick delivery

Doughboy Replacement Liners are all plain blue overlapping liners which are stretched into place, this can be a difficult task to do so please follow the instructions below.

 

  1. Check and Double Check: It’s is vital to check that all levels and measurements are correct before positioning your Doughboy Liner. The cove is a vital structural element that prevents water pressure from forcing the liner out under the bottom rail. So please be sure that cove is installed correctly by manufactures guidelines.
  2. Seam Positioning: Check the pool floor (area inside the walls) for levelness. Fill in all depressions and remove any stones or sharp object from floor. Place the Doughboy liner on the top of top rail, the liner should have overhanging the outside wall by 12” inches. Hold end and unroll liner down middle of pool as you would carpet, do not place liner seam over skimmer or return fitting openings.
  3. Install Liner: Work in both directions from the point where is already overhanging, unfold Doughboy liner, drape over the top rail and down the sides approximately 24” inches. The liner should be barely above the pool floor in the centre only. Remember that the centre seam or centre of the Doughboy Plain Blue liner should be inside the pool about 12” inches below the top rail. Correct any bunching or pleating conditions in the liner wall. Inspect the liner for open seams if any found return to dealer for prompt replacement of liner.
  4. Fill Pool: With the Doughboy Plain Blue liner in position, hold in place by attaching heavy duty clips over folded cardboard on the underside of each top rail. Carefully cover the end of the garden hose with a sock and tape securely, once this is done place hose inside the pool and start filling. As pool fills the liner will stretch as the water begins to cover the bottom. At this point check the walls for EXTREME tautness, release clips if need be but be sure not to release too much slack as this will cause creases. When releasing the clips you will also need to keep in mind the clips will need to be loosened evenly for whole circumference of the pool (Doughboy advise very little amounts at a time). Once the water reaches past the cove the tension should ease off dramatically and you should have no wrinkles on the floor. Creases in the wall can be removed by re-tauting the Doughboy Plain Blue liner over the wall,
  5. Procedure to attached liner: With the help of two or three people, raise and hold the Doughboy Plain Blue liner up from any three top rail sections. Remove some of the top rail completely and stretch the Doughboy liner over metal wall as tight as possible, then re-erect the top rail with the liner in position and repeat the procedure all the way round the pool (Remembering only taking 2-3 sections off at one time) Once this is completed and the water is at correct level then the water can be turned off and cuts to the liner can be made.
Plain Blue 20 Thou Swimming Pool Liner - World of Pools
  • Plain Blue 20 Thou (0.5mm) Swimming Pool Liner
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Individual Job Number On Liner For Easy Re-Ordering

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain Blue 20 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain Blue 20 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

Plain Blue 30 Thou Swimming Pool Liner - World of Pools
  • Plain Blue 30 Thou (0.75mm) Swimming Pool Liner
  • UK Manufactured Highest Quality Swimming Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation Service Available
  • Individual Job Number On Liner For Easy Re-Ordering
  • Range of Plain Pool Colours Aailable

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Plain Blue 30 Thou Swimming Pool Liner is an ideal replacement for any tired or damaged swimming pool liner. Made in the UK by the country's largest pool liner manufacturer the Plain Blue 30 Thou Pool Liners are of the highest quality and each one has its own individual code for ease of re-ordering.

We have provide a list of prices as a guide. The liners are priced for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If you pool is of a different wall height please contact us for a very competitive quote.

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. 

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

Start at the Deep End and secure the liner bead into the linerlock. Work your way round the pool, if two people go in opposite directions. 

Once the liner is fully fitted into the liner lock check how the liner is hanging and adjust where needed. at this stage if possible "Set" your liner with a pool liner vacuum. This will pull the liner against the pool walls and floor, ensuring there are no creases when filling. At this stage fit main drain.

Once any wrinkles are removed start filling the pool. As the pool water rises fit the returns and skimmers as the the water reaches just below each fitting. This will allow the liner to have fully stretched in and reduce any risks of leaks.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Prices below are are for Rectangular hopper or wedge pools with a shallow end wall height of 3ft 4". If your pool has a deeper shallow end please contact us for a very competitive quotation.

  • Plain Blue Overlap Swimming Pool Liner
  • American Manufactured Highest Quality Above Ground Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Replacement Plain Blue Overlap Liners by Swimline are 16 thou on the floor & walls, to ensure a professional installation only install the liner on a warm and dry day as these are stretched into place to prevent creases. These liners are suitable for 36” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

The Overlap liner is probably the least expensive liner you can buy on the market but if installed correctly can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. Here are a few liner installation guidelines that we would strongly suggest following 

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. Always form a cove or install your Easy Cove at the bottom of the pool wall. The coving is a vital part in ensuring a lock is formed at the bottom of your pool. An inadequate cove will result in liner pushing underneath the wall causing the liner to fail.

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

When overlapping your liner be careful not to drag it over any sharp edges to puncture the liner and make sure the overlap is even all the way round. Once you have overlapped it so much aim to have the liner 3” to 6” off the ground before filling and clamp down with heavy duty pegs. 

Start filling the pool, at this stage there should be 1 person inside the pool trying to move out any excess liner material to the edges and ensuring they control the helpers outside the pool to release or hold the liner as necessary.

Whilst filling do not be tempted to drop to much liner in at once as creases will not be able to be pulled out due to the weight of the water. Drop liner in small and even quantities until water level has reached pools walls, at this stage you should not have to drop any more liner in.

These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
Splasher

These liners have a material thickness of:
Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

  • Plain Blue Overlap Swimming Pool Liner
  • American Manufactured Highest Quality Above Ground Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Replacement Plain Blue Overlap Liners by Swimline are 16 thou on the floor & walls, to ensure a professional installation only install the liner on a warm and dry day as these are stretched into place to prevent creases. These liners are suitable for 48” and 52” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

The Overlap liner is probably the least expensive liner you can buy on the market but if installed correctly can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. Here are a few liner installation guidelines that we would strongly suggest following 

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. Always form a cove or install your Easy Cove at the bottom of the pool wall. The coving is a vital part in ensuring a lock is formed at the bottom of your pool. An inadequate cove will result in liner pushing underneath the wall causing the liner to fail.

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

When overlapping your liner be careful not to drag it over any sharp edges to puncture the liner and make sure the overlap is even all the way round. Once you have overlapped it so much aim to have the liner 3” to 6” off the ground before filling and clamp down with heavy duty pegs. 

Start filling the pool, at this stage there should be 1 person inside the pool trying to move out any excess liner material to the edges and ensuring they control the helpers outside the pool to release or hold the liner as necessary.

Whilst filling do not be tempted to drop to much liner in at once as creases will not be able to be pulled out due to the weight of the water. Drop liner in small and even quantities until water level has reached pools walls, at this stage you should not have to drop any more liner in.

These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
Doughboy, Vouge, Teakwood Discovery, Equinox , Regatta & Regatta II, Topaz, Reprieve, Oracle, Trevi 205, Summer Days.

These liners have a material thickness of:
Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Premium Above Ground Pool Blue Solar Cover 200 micron - World of Pools
  • UK made premium 200 micron solar cover
  • Heats your pool for free
  • Keeps debris out of the pool
  • Retains heat at night
  • Reduces chemical usage

DELIVERY: In-stock items are sent out on a next working day service

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

PRODUCT INFO:

Great quality Above Ground Solar Covers at a discount price. Our Premium 200 Micron Blue Solar Cover will warm the water and reduce your heating costs enabling you to swim longer. These solar covers are a better quality than the cheaper intex or bestway covers. By using a better quality cover you will reduce your heating costs as these covers will add more heat to the pool water and more importantly they will retain more heat, especially when night time tempretures are cooler.

Better quality solar covers will also reduce water loss and less water evaporation means lower water bills and a reduction in chemical consumption

When using a solar cover you should have the cover on the pool so the bubbles are facing down. To maximise performance always keep the cover on the pool when not in use.

Sol+Guard Geobubble Swimming Pool Solar Cover - World of Pools
  • Sol Guard 500 Contains UV Boosters to increase pool temperature by up to 8°C - More Heat Gain Than Standard Covers
  • Bubble design creates no weak spots - Means Years More Life For Your Cover
  • Extra Protection Against UV & Chemical Compared To Normal Bubble Cover
  • More naturally gained heat saves you money - Cut Heating Bills By 50%
  • 6 Year Pro Rata Warranty

DELIVERY: Next working day delivery on standard size solar covers. Bespoke made to measure solar covers will take 5 to 7 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.

Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

PRODUCT INFO:

Sol Guard 500 is the best available solar cover on the market. The solar cover has a clear top with tinted translucent underside giving an opaque appearance.

Why chose the Sol Guard 500 over other solar covers

The main reason to choose the sol guard 500 over other solar covers is the heat gain and retention. The Sol Guard 500 will add more heat than traditional solar covers and can increase pool temperature by up to 8 degrees C. With more swimming pool owners using low energy consumption heating systems it is important that the solar cover can offer as much heat gain and retention as possible, extending the season. The other important factor is water evaporation, with upto 98% reduction in evaporation, pool owners will save on the water bills and will have reduced chemical consumption as less fresh water is added to the pool. This may also help pool owners that struggle with pH balance when adding fresh water.

Longer life in a solar cover is important, GeoBubble technology used in the sol guard 500 will increase the expected life of the Cover by upto 25% through its unique shape. This Unique shape improves its endurance against the harsh swimming pool environment with Ultra Violet light and chemical attack. Geobubble SolGuard 500 comes with a 6 year pro rata warranty. When tradidtional solar covers break down at the end of their life span, the bubbles break loose and fall to the bottom of the pool, the design of the geobubble will prevent this from occurring.

Sol guard 500 geobubble comes with a 6-year warranty! So what is GeoBubble?

Made by Plastipack, the leading UK manufacturer of Solar Covers to the UK and Europe, the Geobubble design is a unique bubble shape that has been scientifically designed to increase the expected lifespan of swimming pool solar cover material by up to 25%. So confident are Plastipack in this cover they are offering an unprecedented 6 years pro rata warranty!!

Geobubble Technology: Swimming pool covers are exposed to high Ultra Violet (UV) radiation and chemical attack. Geo Bubble has been designed specifically for use in this environment to help make it resistant against these attacks. This makes Geobubble ideal for warmer countries such as Portugal and Spain. Traditional solar covers have several inherent weaknesses in their design, including thin points and high residual stress. Thin points in a bubble design are weak points, which are quickly broken down by UV and chemical attack. The degradation process is accelerated in areas of high stress, as these areas are under constant strain. These factors result in the bubble material breaking down, and ultimately, premature failure of the swimming pool cover.

Sol Guard 500 GeoBubble is unique because two bubbles are joined together by a waistline centre section, no sharp corners resulting in no thin or weak points in the design and the material contains no stress. The overall thickness of a GeoBubble is 50% more than a traditional solar cover. Solguard 500 has increased resilience against UV and chemical attack.

The sol guard 500 has a larger footprint than traditional solar covers. The large footprint acts as an insulator, retaining more heat in the swimming pool, plus helps the solar cover stick to the water so it cannot be blown off the pool.

We offer standard sizes which can be delivered on a next working day basis. If you have a pool with a roman end, bespoke shape, require a fitted leading edge or want extras such as hemming, please contact us on 01322554870 or email realoffice@btconnect.com. We can make covers fast and normally will have one made and delivered within 10 working days.