Above Ground Pools

Above Ground Swimming Pools make any garden a holiday destination. Enjoy summer with either a temporary put up and take down Intex pool or for the real enthusiast buy one of our permanent above ground swimming pools. We can help you choose whichever will suit your family, budget and garden.
Spray Adhesive For Swimming Pool Foam Underlay - World of Pools
  • Spray Adhesive For Foam Swimming Pool Underlay & Wall Insulation
  • 500ml Cans
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Bonds The Foam Underlay To Pool Walls & Floors

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Swimming Pool Foam Underlay & Wall Insulation Adhesive is designed to quickly bond the foam into place on swimming pool walls and floors.

It is not a "Quick Grab" adhesive so you do have time to position the foam underlay correctly before it sets.

Available in single cans or boxes of 12.

We would advise 5 cans per 50m2 of Foam Underlay

The chart below will help you estimate the number required

Standard Hopper Pool

Floor  Area m2

Wall Area m2

10' x 20'

24.2

18.6

12' x 24'

34.8

22.3

14' x 28'

47.3

26.0

14' x 30'

50.7

27.2

15' x 30'

54.3

27.9

16' x 32'

61.8

29.7

16' x 38'

73.4

33.4

18' x 36'

78.3

33.4

20' x 40'

96.6

37.2

Swimming Pool Foam Underlay & Wall Insulation - World of Pools
  • 8mm Foam Swimming Pool Underlay & Wall Insulation
  • 50m Long Rolls in Two Width Sizes
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 
  • Feels Soft Underfeet
  • Protects the Liner & Improves The  Feel
  • Adhesive Spray in boxes of 12 x 500ml
  • Filament Tape Available

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Swimming Pool Foam Underlay & Wall Insulation is designed to improve the feel of your swimming pool floor & walls whilst protecting the liner from the pool structure.

Available in 1.05m & 1.5m Width Rolls, both 50m long, Pool Foam Underlay is both quick & easy to install when fitting the new liner. Attach to the walls and floor using our Specialist Spray Adhesive and your pool will feel luxurious, whilst the protection the foam offers could add years to your swimming pool liner's life.

Foam underlay should not be used in high water table areas.

Use the chart below to estimate the number of rolls required, but do allow 10% for wastage.

Standard Hopper Pool

Floor  Area m2

Wall Area m2

10' x 20'

24.2

18.6

12' x 24'

34.8

22.3

14' x 28'

47.3

26.0

14' x 30'

50.7

27.2

15' x 30'

54.3

27.9

16' x 32'

61.8

29.7

16' x 38'

73.4

33.4

18' x 36'

78.3

33.4

20' x 40'

96.6

37.2

Alveolen Foam Roll 12mm x 100m2 - Behind Liner Swimming Pool Insulation

by World of Pools
Save 6%
£2,124.00
£1,998.00
  • Alveolen Ch XL PE 12mm x 100m2 Swimming Pool Insulation Foam
  • 2m Wide x 50m Long - Insulation Foam Roll 100m2
  • Made To Order So Please Allow 2-3 Week Lead Time
  • Thermal Resistance at 10°C - ISO 1606 - 0.25m2 KW
  • Does Not Become Waterlogged - <1 Vol 1%
  • Virtually No Compression - 0.6mm After 10 Years
  • Soft & Gentle Feel On Pool Floor & Walls
  • Easy To Install On New Or Refurb Liner
  • Saves £££££s On Heating Costs Over The Lifespan Of The Pool
  • Install On Pool Floors, Walls & Stairs

DELIVERY: Alveoen Foam Rolls have a 2 -3 Week Lead Time

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Alveolen Swimming Pool Insulation Rolls have a high insulation value whilst being very easy to install when replacing your liner. The Alveolen Swimming Pool Insulation Rolls 12mm thickness along with the 60/80kPA compression strength means that you will have soft-feel floors and walls on your pool, reducing risk of injury as well as that luxurious feel, unlike other pools you have swum in. 

The insulating foam material is both Chlorine and Salt water resistant, so it can be installed in most liner pools safely.

Alveolen Polyolefin Closed Cell Insulation Foam Rolls Will Quite Simply Not Only Reduce Your Swimming Pool Heating Bills Massively, But Will Also Provide A Luxurious Feel Under Your New Liner.

Use the chart below to estimate the number of rolls required, but do allow 10% for wastage.

Standard Hopper Pool

Floor  Area m2

Wall Area m2

10' x 20'

24.2

18.6

12' x 24'

34.8

22.3

14' x 28'

47.3

26.0

14' x 30'

50.7

27.2

15' x 30'

54.3

27.9

16' x 32'

61.8

29.7

16' x 38'

73.4

33.4

18' x 36'

78.3

33.4

20' x 40'

96.6

37.2

Alveolen Foam Roll 12mm x 75m2 - Liner Swimming Pool Insulation

by World of Pools
Save 7%
£1,495.00
£1,395.00
  • Alveolen Ch XL PE 12mm x 75m2 Swimming Pool Insulation Foam
  • 1.5m Wide x 50m Long - Insulation Foam Roll 75m2
  • Made To Order Please Allow 2 to 3 Week Lead Time
  • Thermal Resistance at 10°C - ISO 1606 - 0.25m2 KW
  • Does Not Become Waterlogged - <1 Vol 1%
  • Virtually No Compression - 0.6mm After 10 Years
  • Soft & Gentle Feel On Pool Floor & Walls
  • Easy To Install On New Or Refurb Liner
  • Saves £££££s On Heating Costs Over The Lifespan Of The Pool
  • Install On Pool Floors, Walls & Stairs

DELIVERY: Alveoen Foam Rolls have a 2 -3 Week Lead Time

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Alveolen Swimming Pool Insulation Rolls have a high insulation value whilst being very easy to install when replacing your liner. The Alveolen Swimming Pool Insulation Rolls 12mm thickness along with the 60/80kPA compression strength means that you will have soft-feel floors and walls on your pool, reducing risk of injury as well as that luxurious feel, unlike other pools you have swum in. 

The insulating foam material is both Chlorine and Salt water resistant, so it can be installed in most liner pools safely.

Alveolen Polyolefin Closed Cell Insulation Foam Rolls Will Quite Simply Not Only Reduce Your Swimming Pool Heating Bills Massively, But Will Also Provide A Luxurious Feel Under Your New Liner.

Use the chart below to estimate the number of rolls required, but do allow 10% for wastage.

Standard Hopper Pool

Floor  Area m2

Wall Area m2

10' x 20'

24.2

18.6

12' x 24'

34.8

22.3

14' x 28'

47.3

26.0

14' x 30'

50.7

27.2

15' x 30'

54.3

27.9

16' x 32'

61.8

29.7

16' x 38'

73.4

33.4

18' x 36'

78.3

33.4

20' x 40'

96.6

37.2