Hot Splash Above Ground Pool Heat Pump - 3.35kw
- Hot Splash Above Ground Pool Heat Pump 3.35kw
- Plug Into A 13 amp Socket
- Heats Above Ground Pools Up To 10m3 to 30°C
- Summer Season Late May to August / Early September
- 1 Year Parts Warranty
DELIVERY: Hot Splash Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.
RETURNS: Hot Splash Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.
Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870
When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.
The Hot Splash Heat Pump is designed for Above Ground Pools and is one of the smallest above ground pool heat pumps available. Built to heat Intex, Bestway, Summer Escapes and other Summer Use above ground pools with a size of up to 10m3 plugging directly into a 13amp socket
The Hot Splash Heat Pump is very cheap to run when compared to a comparable plug & play electric heater. For example, a 2.2kw Intex Electric Heater requires 2.2kw of power to run at around 42p per hour to run, whilst only giving you 2.2kw of heat. Compare this with the Hot Splash Heat Pump which only requires 0.56kw of electricity in to produce 3.35kw of power out. That is only 10p an hour to get the equivalent of 63p of heat.
Using the Hot Splash Heat Pump could give you a saving of £2.50 per day compared to an Intex heater, making a saving of over £250 in one Summer.
This saving will pay back the extra cost of the Hot Splash Heat Pump in one year. The following year all you have is a £250 saving and a warm pool.
As with all swimming pool heaters, a Solar Cover is essential and the better the quality the more money you save.
The Hot Splash Heat Pump has a Minimum Flow rate requirement of 2m3/hr
Digital Heating Control Panel - Control Heating Up To 30°C & No ByPass Required
All Swimming Pool Heat Pumps are designed to heat Pool water slowly but very cost-effectively. If you correctly size a Hot Splash heat pump to heat your pool from cold to warm it will normally take 2 - 3 days, but following this initial heating period, it is just a matter of using the Hot Splash Heat Pump to keep up the heat every day.
A Good Quality Solar Cover Must be Used With This Heat Pump
A 400 Micron Blue Solar Cover is recommended to be used with this pool heater to preserve as much heat as possible at night. Click Here to go to the 400-micron Blue solar cover page
We would recommend the Hot Splash Above Ground Pool Heat Pump for pools up to 10m3. If your pool is larger than this we would recommend a bigger heat pump.
The images below are our suggestions for above ground pool sizes to help you decide if the Hot Splash Heat Pump is suitable for your pool.
If you would like advice on choosing a heat pump please call on 01322 554 870
|10ft x 30 inch Metal Frame Pool|
|12ft x 30 inch Metal Frame Pool|
|8ft x 30 inch Easy Set Pool|
|10ft x 30 inch Easy Set Pool|
|12ft x 30 inch easy Set Pool|
|12ft x 36 inch Easy Set Pool|